Explore every episode of the podcast Astro arXiv | astro-ph.IM

The Spectroscopic Classification of Astronomical Transients SCAT Survey: Overview, Pipeline Description, Initial Results, and Future Plans by M. A. Tucker et al. on Wednesday 30 November We present the Spectroscopic Classification of Astronomical Transients (SCAT) survey, which is dedicated to spectrophotometric observations of transient objects such as supernovae and tidal disruption events. SCAT uses the SuperNova Integral-Field Spectrograph (SNIFS) on the University of Hawai'i 2.2-meter (UH2.2m) telescope. SNIFS was designed specifically for accurate transient spectrophotometry, including absolute flux calibration and host-galaxy removal. We describe the data reduction and calibration pipeline including spectral extraction, telluric correction, atmospheric characterization, nightly photometricity, and spectrophotometric precision. We achieve $\lesssim 5\%$ spectrophotometry across the full optical wavelength range ($3500-9000~\r{A}$) under photometric conditions. The inclusion of photometry from the SNIFS multi-filter mosaic imager allows for decent spectrophotometric calibration ($10-20\%$) even under unfavorable weather/atmospheric conditions. SCAT obtained $\approx 640$ spectra of transients over the first 3 years of operations, including supernovae of all types, active galactic nuclei, cataclysmic variables, and rare transients such as superluminous supernovae and tidal disruption events. These observations will provide the community with benchmark spectrophotometry to constrain the next generation of hydrodynamic and radiative transfer models. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2210.09322v2

Using a Conditional Generative Adversarial Network to Control the Statistical Characteristics of Generated Images for IACT Data Analysis by Julia Dubenskaya et al. on Wednesday 30 November Generative adversarial networks are a promising tool for image generation in the astronomy domain. Of particular interest are conditional generative adversarial networks (cGANs), which allow you to divide images into several classes according to the value of some property of the image, and then specify the required class when generating new images. In the case of images from Imaging Atmospheric Cherenkov Telescopes (IACTs), an important property is the total brightness of all image pixels (image size), which is in direct correlation with the energy of primary particles. We used a cGAN technique to generate images similar to whose obtained in the TAIGA-IACT experiment. As a training set, we used a set of two-dimensional images generated using the TAIGA Monte Carlo simulation software. We artificiallly divided the training set into 10 classes, sorting images by size and defining the boundaries of the classes so that the same number of images fall into each class. These classes were used while training our network. The paper shows that for each class, the size distribution of the generated images is close to normal with the mean value located approximately in the middle of the corresponding class. We also show that for the generated images, the total image size distribution obtained by summing the distributions over all classes is close to the original distribution of the training set. The results obtained will be useful for more accurate generation of realistic synthetic images similar to the ones taken by IACTs. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15807v1

A Bayesian approach to RFI mitigation by S. A. K. Leeney et al. on Wednesday 30 November Radio Frequency Interference (RFI) is an endemic problem in radio astronomy. Information in contaminated frequency channels is lost and it can lead to significant systematic error if not properly modelled. In this paper we propose a RFI mitigation methodology that takes a Bayesian approach, where contaminated data is both flagged and managed as part of a single step fitting process. To the authors knowledge, our approach is first-of-its-kind. We provide a proof-of-concept of our methods which are also tested and shown to be effective on both a simple toy model and when incorporated into the Bayesian data analysis pipeline for REACH (a modern cosmological radio experiment). arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15448v1

Laue lenses: Focusing optics for hard X soft Gamma-ray Astronomy by L Ferro et al. on Wednesday 30 November Hard X-/soft Gamma-ray astronomy is a key field for the study of important astrophysical phenomena such as the electromagnetic counterparts of gravitational waves, gamma-ray bursts, black holes physics and many more. However, the spatial localization, imaging capabilities and sensitivity of the measurements are strongly limited for the energy range $>$70 keV due to the lack of focusing instruments operating in this energy band. A new generation of instruments suitable to focus hard X-/ soft Gamma-rays is necessary to shed light on the nature of astrophysical phenomena which are still unclear due to the limitations of current direct-viewing telescopes. Laue lenses can be the answer to those needs. A Laue lens is an optical device consisting of a large number of properly oriented crystals which are capable, through Laue diffraction, of concentrating the radiation into the common Laue lens focus. In contrast with the grazing incidence telescopes commonly used for softer X-rays, the transmission configuration of the Laue lenses allows us to obtain a significant sensitive area even at energies of hundreds of keV. At the University of Ferrara we are actively working on the modelization and construction of a broad-band Laue lens. In this work we will present the main concepts behind Laue lenses and the latest technological developments of the TRILL (Technological Readiness Increase for Laue Lenses) project, devoted to the advancement of the technological readiness of Laue lenses by developing the first prototype of a lens sector made of cylindrical bent crystals of Germanium. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16880v1

Bayesian modelling of scattered light in the LIGO interferometers by Rhiannon Udall et al. on Wednesday 30 November Excess noise from scattered light poses a persistent challenge in the analysis of data from gravitational wave detectors such as LIGO. We integrate a physically motivated model for the behavior of these "glitches" into a standard Bayesian analysis pipeline used in gravitational wave science. This allows for the inference of the free parameters in this model, and subtraction of these models to produce glitch-free versions of the data. We show that this inference is an effective discriminator of the presence of the features of these glitches, even when those features may not be discernible in standard visualizations of the data. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15867v1

Estimating effective wind speed from Gemini Planet Imager's adaptive optics data using covariance maps by Daniel M. Levinstein et al. on Wednesday 30 November The Earth's turbulent atmosphere results in speckled and blurred images of astronomical objects when observed by ground based visible and near-infrared telescopes. Adaptive optics (AO) systems are employed to reduce these atmospheric effects by using wavefront sensors (WFS) and deformable mirrors. Some AO systems are not fast enough to correct for strong, fast, high turbulence wind layers leading to the wind butterfly effect, or wind-driven halo, reducing contrast capabilities in coronagraphic images. Estimating the effective wind speed of the atmosphere allows us to calculate the atmospheric coherence time. This is not only an important parameter to understand for site characterization but could be used to help remove the wind butterfly in post processing. Here we present a method for estimating the atmospheric effective wind speed from spatio-temporal covariance maps generated from pseudo open-loop (POL) WFS data. POL WFS data is used as it aims to reconstruct the full wavefront information when operating in closed-loop. The covariance maps show how different atmospheric turbulent layers traverse the telescope. Our method successfully recovered the effective wind speed from simulated WFS data generated with the soapy python library. The simulated atmospheric turbulence profiles consist of two turbulent layers of ranging strengths and velocities. The method has also been applied to Gemini Planet Imager (GPI) AO WFS data. This gives insight into how the effective wind speed can affect the wind-driven halo seen in the AO image point spread function. In this paper, we will present results from simulated and GPI WFS data. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16441v1

Star & planet formation: Upcoming opportunities in the space-based infrared by Floris van der Tak. on Wednesday 30 November While ALMA and JWST are revolutionizing our view of star and planet formation with their unprecedented sensitivity and resolution at submillimeter and near-IR wavelengths, many outstanding questions can only be answered with observations in the thermal (mid- and far-) infrared domain. Many of these questions require space-based observations, to achieve the necessary sensitivity and/or wavelength coverage. In particular, how do interstellar clouds develop filamentary structures and dense cores? What are the masses and luminosities of objects at the earliest stages of star formation? What are the gas masses of planet-forming disks, and how do these disks disperse during planet formation? How is refractory and volatile material distributed within the disks, and how does this evolve with time? This article reviews how upcoming and planned balloon-borne and space-based telescopes for the mid- and far-infrared will address these questions, and outlines which further missions will be needed beyond 2030, when the ELTs will be in full operation. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15149v2

Star & planet formation: Upcoming opportunities in the space-based infrared by Floris van der Tak. on Wednesday 30 November While ALMA and JWST are revolutionizing our view of star and planet formation with their unprecedented sensitivity and resolution at submillimeter and near-IR wavelengths, many outstanding questions can only be answered with observations in the thermal (mid- and far-) infrared domain. Many of these questions require space-based observations, to achieve the necessary sensitivity and/or wavelength coverage. In particular, how do interstellar clouds develop filamentary structures and dense cores? What are the masses and luminosities of objects at the earliest stages of star formation? What are the gas masses of planet-forming disks, and how do these disks disperse during planet formation? How is refractory and volatile material distributed within the disks, and how does this evolve with time? This article reviews how upcoming and planned balloon-borne and space-based telescopes for the mid- and far-infrared will address these questions, and outlines which further missions will be needed beyond 2030, when the ELTs will be in full operation. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15149v2

GECAM Localization of High Energy Transients and the Systematic Error by Yi Zhao et al. on Wednesday 30 November Gravitational wave high-energy Electromagnetic Counterpart All-sky Monitor (GECAM) is a pair of microsatellites (i.e. GECAM-A and GECAM-B) dedicated to monitoring gamma-ray transients including gravitational waves high-energy electromagnetic counterparts, Gamma-ray Bursts, Soft Gamma-ray Repeaters, Solar Flares and Terrestrial Gamma-ray Flashes. Since launch in December 2020, GECAM-B has detected hundreds of astronomical and terrestrial events. For these bursts, localization is the key for burst identification and classification as well as follow-up observations in multi-wavelength. Here, we propose a Bayesian localization method with Poisson data with Gaussian background profile likelihood to localize GECAM bursts based on the burst counts distribution in detectors with different orientations. We demonstrate that this method can work well for all kinds of bursts, especially for extremely short ones. In addition, we propose a new method to estimate the systematic error of localization based on a confidence level test, which can overcome some problems of the existing method in literature. We validate this method by Monte Carlo simulations, and then apply it to a burst sample with accurate location and find that the mean value of the systematic error of GECAM-B localization is $\sim 2.5^{\circ}$. By considering this systematic error, we can obtain a reliable localization probability map for GECAM bursts. Our methods can be applied to other gamma-ray monitors. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15570v1

Improving Performance in Java: TOPCAT and STILTS by Mark Taylor. on Wednesday 30 November TOPCAT and STILTS are mature Java desktop applications for working with tabular data that have always had a focus on efficiency for large or very large data sets. This paper presents some progress, experience and lessons learned from efforts over recent years to improve performance further by multithreading key algorithms as well as other strategies. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16913v1

Satellite Constellation Avoidance with the Rubin Observatory Legacy Survey of Space and Time by Jinghan Alina Hu et al. on Wednesday 30 November We investigate a novel satellite avoidance strategy to mitigate the impact of large commercial satellite constellations in low-Earth orbit on the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST). We simulate the orbits of currently planned Starlink and OneWeb constellations ($\sim$40,000 satellites) to test how effectively an upgraded Rubin scheduler algorithm can avoid them, and assess how the overall survey is affected. Given a reasonably accurate satellite orbit forecast, we find it is possible to adjust the scheduler algorithm to effectively avoid some satellites. Overall, sacrificing 10% of LSST observing time to avoid satellites reduces the fraction of LSST visits with streaks by a factor of two. Whether such a mitigation will be required depends on the overall impact of streaks on science, which is not yet well quantified. This is due to a lack of adequate information about satellite brightness distributions as well as the impact of glints and low surface brightness residuals on alert purity and systematic errors in cosmological parameter estimation. A significant increase in the number of satellites or their brightness during Rubin Operations may make implementing this satellite avoidance strategy worthwhile. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15908v1

3UCubed: The IMAP Student Collaboration CubeSat Project by Marcus Alfred et al. on Wednesday 30 November The 3UCubed project is a 3U CubeSat being jointly developed by the University of New Hampshire, Sonoma State University, and Howard University as a part of the NASA Interstellar Mapping and Acceleration Probe, IMAP, student collaboration. This project comprises of a multidisciplinary team of undergraduate students from all three universities. The mission goal of the 3UCubed is to understand how Earths polar upper atmosphere the thermosphere in Earths auroral regions, responds to particle precipitation and solar wind forcing, and internal magnetospheric processes. 3UCubed includes two instruments with rocket heritage to achieve the science mission: an ultraviolet photomultiplier tube, UVPMT, and an electron retarding potential analyzer ERPA. The spacecraft bus consists of the following subsystems: Attitude Determination and Control, Command and Data Handling, Power, Communication, Structural, and Thermal. Currently, the project is in the post-PDR stage, starting to build and test engineering models to develop a FlatSat prior to critical design review in 2023. The goal is to launch at least one 3U CubeSat to collect science data close to the anticipated peak of Solar Cycle 25 around July 2025. Our mother mission, IMAP, is also projected to launch in 2025, which will let us jointly analyze the science data of the main mission, providing the solar wind measurements and inputs to the magnetosphere with that of 3UCubed, providing the response of Earths cusp to these inputs. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15781v1

Elements of effective machine learning datasets in astronomy by Bernie Boscoe et al. on Wednesday 30 November In this work, we identify elements of effective machine learning datasets in astronomy and present suggestions for their design and creation. Machine learning has become an increasingly important tool for analyzing and understanding the large-scale flood of data in astronomy. To take advantage of these tools, datasets are required for training and testing. However, building machine learning datasets for astronomy can be challenging. Astronomical data is collected from instruments built to explore science questions in a traditional fashion rather than to conduct machine learning. Thus, it is often the case that raw data, or even downstream processed data is not in a form amenable to machine learning. We explore the construction of machine learning datasets and we ask: what elements define effective machine learning datasets? We define effective machine learning datasets in astronomy to be formed with well-defined data points, structure, and metadata. We discuss why these elements are important for astronomical applications and ways to put them in practice. We posit that these qualities not only make the data suitable for machine learning, they also help to foster usable, reusable, and replicable science practices. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.14401v2

The performance of the MAGIC telescopes using deep convolutional neural networks with CTLearn by T. Miener et al. on Wednesday 30 November The Major Atmospheric Gamma Imaging Cherenkov (MAGIC) telescope system is located on the Canary Island of La Palma and inspects the very high-energy (VHE, few tens of GeV and above) gamma-ray sky. MAGIC consists of two imaging atmospheric Cherenkov telescopes (IACTs), which capture images of the air showers originating from the absorption of gamma rays and cosmic rays by the atmosphere, through the detection of Cherenkov photons emitted in the shower. The sensitivity of IACTs to gamma-ray sources is mainly determined by the ability to reconstruct the properties (type, energy, and arrival direction) of the primary particle generating the air shower. The state-of-the-art IACT pipeline for shower reconstruction is based on the parameterization of the shower images by extracting geometric and stereoscopic features and machine learning algorithms like random forest or boosted decision trees. In this contribution, we explore deep convolutional neural networks applied directly to the pixelized images of the camera as a promising method for IACT full-event reconstruction and present the performance of the method on observational data using CTLearn, a package for IACT event reconstruction that exploits deep learning. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16009v1

Visual Magnitude of the BlueWalker 3 Satellite by Anthony Mallama et al. on Wednesday 30 November Observations have been carried out in order to assess the optical characteristics of the BlueWalker 3 spacecraft which is the prototype for a new satellite constellation. The illumination phase function has been determined and evaluated. The average visual magnitude when seen overhead at the beginning or ending of astronomical twilight is found to be +1.4. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.09811v2

FIREBall-2: flight preparation of a proven balloon payload to image the intermediate redshift circumgalactic medium by Vincent Picouet et al. on Wednesday 30 November FIREBall-2 is a stratospheric balloon-borne 1-m telescope coupled to a UV multi-object slit spectrograph designed to map the faint UV emission surrounding z~0.7 galaxies and quasars through their Lyman-alpha line emission. This spectro-imager had its first launch on September 22nd 2018 out of Ft. Sumner, NM, USA. Because the balloon was punctured, the flight was abruptly interrupted. Instead of the nominal 8 hours above 32 km altitude, the instrument could only perform science acquisition for 45 minutes at this altitude. In addition, the shape of the deflated balloon, combined with a full Moon, revealed a severe off-axis scattered light path, directly into the UV science detector and about 100 times larger than expected. In preparation for the next flight, and in addition to describing FIREBall-2's upgrade, this paper discusses the exposure time calculator (ETC) that has been designed to analyze the instrument's optimal performance (explore the instrument's limitations and subtle trade-offs). arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15491v1

Estimating effective wind speed from Gemini Planet Imager's adaptive optics data using covariance maps by Daniel M. Levinstein et al. on Wednesday 30 November The Earth's turbulent atmosphere results in speckled and blurred images of astronomical objects when observed by ground based visible and near-infrared telescopes. Adaptive optics (AO) systems are employed to reduce these atmospheric effects by using wavefront sensors (WFS) and deformable mirrors. Some AO systems are not fast enough to correct for strong, fast, high turbulence wind layers leading to the wind butterfly effect, or wind-driven halo, reducing contrast capabilities in coronagraphic images. Estimating the effective wind speed of the atmosphere allows us to calculate the atmospheric coherence time. This is not only an important parameter to understand for site characterization but could be used to help remove the wind butterfly in post processing. Here we present a method for estimating the atmospheric effective wind speed from spatio-temporal covariance maps generated from pseudo open-loop (POL) WFS data. POL WFS data is used as it aims to reconstruct the full wavefront information when operating in closed-loop. The covariance maps show how different atmospheric turbulent layers traverse the telescope. Our method successfully recovered the effective wind speed from simulated WFS data generated with the soapy python library. The simulated atmospheric turbulence profiles consist of two turbulent layers of ranging strengths and velocities. The method has also been applied to Gemini Planet Imager (GPI) AO WFS data. This gives insight into how the effective wind speed can affect the wind-driven halo seen in the AO image point spread function. In this paper, we will present results from simulated and GPI WFS data. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16441v1

Adding Workflow Management Flexibility to LSST Pipelines Execution by Michelle Gower et al. on Wednesday 30 November Data processing pipelines need to be executed at scales ranging from small runs up through large production data release runs resulting in millions of data products. As part of the Rubin Observatory's pipeline execution system, BPS is the abstraction layer that provides an interface to different Workflow Management Systems (WMS) such as HTCondor and PanDA. During the submission process, the pipeline execution system interacts with the Data Butler to produce a science-oriented execution graph from algorithmic tasks. BPS converts this execution graph to a workflow graph and then uses a WMS-specific plugin to submit and manage the workflow. Here we will discuss the architectural design of this interface and report briefly on the recent production of the Data Preview 0.2 release and how the system is used by pipeline developers. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15795v1

Panel Discussion: Practical Problem Solving for Machine Learning by Guillermo Cabrera et al. on Wednesday 30 November Machine Learning is a powerful tool for astrophysicists, which has already had significant uptake in the community. But there remain some barriers to entry, relating to proper understanding, the difficulty of interpretability, and the lack of cohesive training. In this discussion session we addressed some of these questions, and suggest how the field may move forward. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16782v1

JWST NIRCam Defocused Imaging: Photometric Stability Performance and How it Can Sense Mirror Tilts by Everett Schlawin et al. on Wednesday 30 November We use JWST NIRCam short wavelength photometry to capture a transit lightcurve of the exoplanet HAT-P-14 b to assess performance as part of instrument commissioning. The short wavelength precision is 152 ppm per 27 second integration as measured over the full time series compared to a theoretical limit of 107 ppm, after corrections to spatially correlated 1/f noise. Persistence effects from charge trapping are well fit by an exponential function with short characteristic timescales, settling on the order of 5-15 minutes. The short wavelength defocused photometry is also uniquely well suited to measure the realtime wavefront error of JWST. Analysis of the images and reconstructed wavefront maps indicate that two different hexagonal primary mirror segments exhibited "tilt events" where they changed orientation rapidly in less than ~1.4 seconds. In some cases, the magnitude and timing of the flux jumps caused by tilt events can be accurately predicted with a telescope model. These tilt events can be sensed by simultaneous longer-wavelength NIRCam grism spectral images alone in the form of changes to the point spread function, diagnosed from the FWHM. They can also be sensed with the FGS instrument from difference images. Tilt events possibly from sudden releases of stress in the backplane structure behind the mirrors were expected during the commissioning period because they were found in ground-based testing. Tilt events have shown signs of decreasing in frequency but have not disappeared completely. The detectors exhibit some minor (less than 1%) deviations from linear behavior in the first few groups of each integration, potentially impacting absolute fluxes and transit depths on bright targets where only a handful of groups are possible. Overall, the noise is within 50% of the theoretical photon noise and read noise. This bodes well for high precision time series measurements. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16727v1

ASTENA: a mission concept for a deep study of the transient gamma-ray sky and for nuclear astrophysics by E. Virgilli et al. on Wednesday 30 November Gamma-ray astronomy is a branch whose potential has not yet been fully exploited. The observations of elemental and isotopic abundances in supernova (SN) explosions are key probes not only of the stellar structure and evolution but also for understanding the physics that makes Type-Ia SNe as standard candles for the study of the Universe expansion properties. In spite of its crucial role, nuclear astrophysics remains a poorly explored field mainly for the typical emission lines intensity which are vanishing small and requires very high sensitivities of the telescopes. Furthermore, in spite that the Galactic bulge-dominated intensity of positron annihilation line at 511 keV has been measured, its origin is still a mystery due to the poor angular resolution and insufficient sensitivity of the commonly employed instrumentation in the sub-MeV energy domain. To answer these scientific issues a jump in sensitivity and angular resolution with respect to the present instrumentation is required. Conceived within the EU project AHEAD, a new high energy mission, capable of tackling the previously mentioned topics, has been proposed. This concept of mission named ASTENA (Advanced Surveyor of Transient Events and Nuclear Astrophysics), includes two instruments: a Wide Field Monitor with Imaging and Spectroscopic (WFM-IS, 2 keV - 20 MeV) capabilities and a Narrow Field Telescope (NFT, 50 - 700 keV). Thanks to the combination of angular resolution, sensitivity and large FoV, ASTENA will be a breakthrough in the hard X and soft gamma--ray energy band, also enabling polarimetry in this energy band. In this talk the science goals of the mission are discussed, the payload configuration is described and expected performances in observing key targets are shown. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16916v1

Optimal frequency-domain analysis for spacecraft time series: Introducing the missing-data multitaper power spectrum estimator by Sarah E. Dodson-Robinson et al. on Wednesday 30 November While the Lomb-Scargle periodogram is foundational to astronomy, it has a significant shortcoming: its variance does not decrease as more data are acquired. Statisticians have a 60-year history of developing variance-suppressing power spectrum estimators, but most are not used in astronomy because they are formulated for time series with uniform observing cadence and without seasonal or daily gaps. Here we demonstrate how to apply the missing-data multitaper power spectrum estimator to spacecraft data with uniform time intervals between observations but missing data during thruster fires or momentum dumps. The F-test for harmonic components may be applied to multitaper power spectrum estimates to identify statistically significant oscillations that would not rise above a white noise-based false alarm level. Multitapering improves the dynamic range of the power spectrum estimate and suppresses spectral window artifacts. We demonstrate multitapering on simultaneous measurements of the interplanetary magnetic field and the solar 10.7-cm radio flux, finding high coherence at frequencies associated with the sun's activity cycle and quasibiennial oscillations. Next we show that the multitaper--F-test combination applied to Kepler observations of KIC 6102338 detects differential rotation without requiring iterative sinusoid fitting and subtraction. Significant signals reside at harmonics of both rotation frequencies and suggest an antisolar rotation profile. Finally, we demonstrate the missing-data multitaper version of complex demodulation, which extracts the low-frequency envelope from a modulated signal. We argue that multitaper power spectrum estimators should be used for all time series with regular observing cadence. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16549v1

PERISTOLE: PackagE that geneRates tIme delay plotS caused by graviTatiOnaL lEnsing by T. S. Sachin Venkatesh et al. on Wednesday 30 November We present PERISTOLE to study the various time delays associated with the pulsar rotation and other general relativistic aspects of binary pulsars. It is made available as an open-source python package which takes some parameters of the double pulsar system as input and outputs the rotational and latitudinal lensing delays along with the geometric and Shapiro delays that arise due to gravitational lensing. This package was intended to provide a way to quickly analyse, evaluate and study the differences between variations of the same systems and also to quantify the consequences that different parameters have over the system. Through this research note, we briefly describe the motivation behind PERISTOLE and showcase its capabilities using the only double pulsar system ever found, J0737-3039. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16036v1

Spectroscopic time series performance of the Mid-Infrared Instrument on the JWST by Jeroen Bouwman et al. on Wednesday 30 November We present here the first ever mid-infrared spectroscopic time series observation of the transiting exoplanet \object{L 168-9 b} with the Mid-Infrared Instrument (MIRI) on the James Webb Space Telescope. The data were obtained as part of the MIRI commissioning activities, to characterize the performance of the Low Resolution Spectroscopy (LRS) mode for these challenging observations. To assess the MIRI LRS performance, we performed two independent analyses of the data. We find that with a single transit observation we reached a spectro-photometric precision of $\sim$50 ppm in the 7-8~\micron~range at R=50, consistent with $\sim$25 ppm systematic noise. The derived band averaged transit depth is 524~$\pm$~15~ppm and 547~$\pm$~13~ppm for the two applied analysis methods, respectively, recovering the known transit depth to within 1~$\sigma$. The measured noise in the planet's transmission spectrum is approximately 15-20\% higher than random noise simulations over wavelengths $6.8 \lesssim \lambda \lesssim 11$ $\mu$m. We observed an excess noise at shorter wavelengths, for which possible causes are discussed. This performance was achieved with limited in-flight calibration data, demonstrating the future potential of MIRI for the characterization of exoplanet atmospheres. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16123v1

Posterior samples of source galaxies in strong gravitational lenses with score-based priors by Alexandre Adam et al. on Wednesday 30 November Inferring accurate posteriors for high-dimensional representations of the brightness of gravitationally-lensed sources is a major challenge, in part due to the difficulties of accurately quantifying the priors. Here, we report the use of a score-based model to encode the prior for the inference of undistorted images of background galaxies. This model is trained on a set of high-resolution images of undistorted galaxies. By adding the likelihood score to the prior score and using a reverse-time stochastic differential equation solver, we obtain samples from the posterior. Our method produces independent posterior samples and models the data almost down to the noise level. We show how the balance between the likelihood and the prior meet our expectations in an experiment with out-of-distribution data. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.03812v2

The MUSE second-generation VLT instrument by Bacon R. et al. on Wednesday 30 November The Multi Unit Spectroscopic Explorer (MUSE) is a second-generation VLT panoramic integral-field spectrograph currently in manufacturing, assembly and integration phase. MUSE has a field of 1x1 arcmin2 sampled at 0.2x0.2 arcsec2 and is assisted by the VLT ground layer adaptive optics ESO facility using four laser guide stars. The instrument is a large assembly of 24 identical high performance integral field units, each one composed of an advanced image slicer, a spectrograph and a 4kx4k detector. In this paper we review the progress of the manufacturing and report the performance achieved with the first integral field unit. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16795v1

Adding Workflow Management Flexibility to LSST Pipelines Execution by Michelle Gower et al. on Tuesday 29 November Data processing pipelines need to be executed at scales ranging from small runs up through large production data release runs resulting in millions of data products. As part of the Rubin Observatory's pipeline execution system, BPS is the abstraction layer that provides an interface to different Workflow Management Systems (WMS) such as HTCondor and PanDA. During the submission process, the pipeline execution system interacts with the Data Butler to produce a science-oriented execution graph from algorithmic tasks. BPS converts this execution graph to a workflow graph and then uses a WMS-specific plugin to submit and manage the workflow. Here we will discuss the architectural design of this interface and report briefly on the recent production of the Data Preview 0.2 release and how the system is used by pipeline developers. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15795v1

FIREBall-2: flight preparation of a proven balloon payload to image the intermediate redshift circumgalactic medium by Vincent Picouet et al. on Tuesday 29 November FIREBall-2 is a stratospheric balloon-borne 1-m telescope coupled to a UV multi-object slit spectrograph designed to map the faint UV emission surrounding z~0.7 galaxies and quasars through their Lyman-alpha line emission. This spectro-imager had its first launch on September 22nd 2018 out of Ft. Sumner, NM, USA. Because the balloon was punctured, the flight was abruptly interrupted. Instead of the nominal 8 hours above 32 km altitude, the instrument could only perform science acquisition for 45 minutes at this altitude. In addition, the shape of the deflated balloon, combined with a full Moon, revealed a severe off-axis scattered light path, directly into the UV science detector and about 100 times larger than expected. In preparation for the next flight, and in addition to describing FIREBall-2's upgrade, this paper discusses the exposure time calculator (ETC) that has been designed to analyze the instrument's optimal performance (explore the instrument's limitations and subtle trade-offs). arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15491v1

Concept of an achromatic stellar coronagraph and its application for detecting extrasolar planets by Bhavesh Jaiswal. on Tuesday 29 November Imaging the planets that orbit around other stars requires blocking the host star which is usually 8-10 orders of magnitude brighter than the planets. This is achieved with the help of a stellar coronagraph. In the current work, a concept of a new type of stellar coronagraph is introduced where the star light is blocked by a linear polarizer in the collimated beam. It is based on differential rotation between the linear polarization state of planet light and that of star light. This is achieved with the help of a set of thick birefringent crystals in the collimated beam of a telescope where the planet light is made to travel extra optical path length compared to star light. By adjusting the orientation and thickness of the crystal, the optical path length can be made to cause a phase difference of {\pi}, just enough to rotate the initial plane of polarization by 90{\deg} for planet-light without affecting the star light. Theoretical calculations involving the phase difference due to birefringent crystals are presented here along with the basic configuration and design. It is shown that the design blocks the star light identically at all wavelengths. Application of this concept for detecting Earth-like extrasolar planet is discussed using a one-meter class telescope. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.14624v1

Posterior samples of source galaxies in strong gravitational lenses with score-based priors by Alexandre Adam et al. on Tuesday 29 November Inferring accurate posteriors for high-dimensional representations of the brightness of gravitationally-lensed sources is a major challenge, in part due to the difficulties of accurately quantifying the priors. Here, we report the use of a score-based model to encode the prior for the inference of undistorted images of background galaxies. This model is trained on a set of high-resolution images of undistorted galaxies. By adding the likelihood score to the prior score and using a reverse-time stochastic differential equation solver, we obtain samples from the posterior. Our method produces independent posterior samples and models the data almost down to the noise level. We show how the balance between the likelihood and the prior meet our expectations in an experiment with out-of-distribution data. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.03812v2

GECAM Localization of High Energy Transients and the Systematic Error by Yi Zhao et al. on Tuesday 29 November Gravitational wave high-energy Electromagnetic Counterpart All-sky Monitor (GECAM) is a pair of microsatellites (i.e. GECAM-A and GECAM-B) dedicated to monitoring gamma-ray transients including gravitational waves high-energy electromagnetic counterparts, Gamma-ray Bursts, Soft Gamma-ray Repeaters, Solar Flares and Terrestrial Gamma-ray Flashes. Since launch in December 2020, GECAM-B has detected hundreds of astronomical and terrestrial events. For these bursts, localization is the key for burst identification and classification as well as follow-up observations in multi-wavelength. Here, we propose a Bayesian localization method with Poisson data with Gaussian background profile likelihood to localize GECAM bursts based on the burst counts distribution in detectors with different orientations. We demonstrate that this method can work well for all kinds of bursts, especially for extremely short ones. In addition, we propose a new method to estimate the systematic error of localization based on a confidence level test, which can overcome some problems of the existing method in literature. We validate this method by Monte Carlo simulations, and then apply it to a burst sample with accurate location and find that the mean value of the systematic error of GECAM-B localization is $\sim 2.5^{\circ}$. By considering this systematic error, we can obtain a reliable localization probability map for GECAM bursts. Our methods can be applied to other gamma-ray monitors. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15570v1

Using a Conditional Generative Adversarial Network to Control the Statistical Characteristics of Generated Images for IACT Data Analysis by Julia Dubenskaya et al. on Tuesday 29 November Generative adversarial networks are a promising tool for image generation in the astronomy domain. Of particular interest are conditional generative adversarial networks (cGANs), which allow you to divide images into several classes according to the value of some property of the image, and then specify the required class when generating new images. In the case of images from Imaging Atmospheric Cherenkov Telescopes (IACTs), an important property is the total brightness of all image pixels (image size), which is in direct correlation with the energy of primary particles. We used a cGAN technique to generate images similar to whose obtained in the TAIGA-IACT experiment. As a training set, we used a set of two-dimensional images generated using the TAIGA Monte Carlo simulation software. We artificiallly divided the training set into 10 classes, sorting images by size and defining the boundaries of the classes so that the same number of images fall into each class. These classes were used while training our network. The paper shows that for each class, the size distribution of the generated images is close to normal with the mean value located approximately in the middle of the corresponding class. We also show that for the generated images, the total image size distribution obtained by summing the distributions over all classes is close to the original distribution of the training set. The results obtained will be useful for more accurate generation of realistic synthetic images similar to the ones taken by IACTs. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15807v1

3UCubed: The IMAP Student Collaboration CubeSat Project by Marcus Alfred et al. on Tuesday 29 November The 3UCubed project is a 3U CubeSat being jointly developed by the University of New Hampshire, Sonoma State University, and Howard University as a part of the NASA Interstellar Mapping and Acceleration Probe, IMAP, student collaboration. This project comprises of a multidisciplinary team of undergraduate students from all three universities. The mission goal of the 3UCubed is to understand how Earths polar upper atmosphere the thermosphere in Earths auroral regions, responds to particle precipitation and solar wind forcing, and internal magnetospheric processes. 3UCubed includes two instruments with rocket heritage to achieve the science mission: an ultraviolet photomultiplier tube, UVPMT, and an electron retarding potential analyzer ERPA. The spacecraft bus consists of the following subsystems: Attitude Determination and Control, Command and Data Handling, Power, Communication, Structural, and Thermal. Currently, the project is in the post-PDR stage, starting to build and test engineering models to develop a FlatSat prior to critical design review in 2023. The goal is to launch at least one 3U CubeSat to collect science data close to the anticipated peak of Solar Cycle 25 around July 2025. Our mother mission, IMAP, is also projected to launch in 2025, which will let us jointly analyze the science data of the main mission, providing the solar wind measurements and inputs to the magnetosphere with that of 3UCubed, providing the response of Earths cusp to these inputs. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15781v1

Star & planet formation: Upcoming opportunities in the space-based infrared by Floris van der Tak. on Tuesday 29 November While ALMA and JWST are revolutionizing our view of star and planet formation with their unprecedented sensitivity and resolution at submillimeter and near-IR wavelengths, many outstanding questions can only be answered with observations in the thermal (mid- and far-) infrared domain. Many of these questions require space-based observations, to achieve the necessary sensitivity and/or wavelength coverage. In particular, how do interstellar clouds develop filamentary structures and dense cores? What are the masses and luminosities of objects at the earliest stages of star formation? What are the gas masses of planet-forming disks, and how do these disks disperse during planet formation? How is refractory and volatile material distributed within the disks, and how does this evolve with time? This article reviews how upcoming and planned balloon-borne and space-based telescopes for the mid- and far-infrared will address these questions, and outlines which further missions will be needed beyond 2030, when the ELTs will be in full operation. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15149v1

Characterisation of the MUSIC ASIC for large-area silicon photomultipliers for gamma-ray astronomy by Nicolas De Angelis et al. on Tuesday 29 November Large-area silicon photomultipliers (SiPMs) are desired in many applications where large surfaces have to be covered. For instance, a large area SiPM has been developed by Hamamatsu Photonics in collaboration with the University of Geneva, to equip gamma-ray cameras employed in imaging atmospheric Cherenkov telescopes. Being the sensor about 1 cm$^2$, a suitable preamplification electronics has been investigated in this work, which can deal with long pulses induced by the large capacitance of the sensor. The so-called Multiple Use SiPM Integrated Circuit (MUSIC), developed by the ICCUB (University of Barcelona), is investigated as a potential front-end ASIC, suitable to cover large area photodetection planes of gamma-ray telescopes. The ASIC offers an interesting pole-zero cancellation (PZC) that allows dealing with long SiPM signals, the feature of active summation of up to 8 input channels into a single differential output and it can offer a solution for reducing power consumption compared to discrete solutions. Measurements and simulations of MUSIC coupled to two SiPMs developed by Hamamatsu are considered and the ASIC response is characterized. The 5$^{th}$ generation sensor of the Low Cross Talk technology coupled to MUSIC turns out to be a good solution for gamma-ray cameras. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.14022v2

Elements of effective machine learning datasets in astronomy by Bernie Boscoe et al. on Tuesday 29 November In this work, we identify elements of effective machine learning datasets in astronomy and present suggestions for their design and creation. Machine learning has become an increasingly important tool for analyzing and understanding the large-scale flood of data in astronomy. To take advantage of these tools, datasets are required for training and testing. However, building machine learning datasets for astronomy can be challenging. Astronomical data is collected from instruments built to explore science questions in a traditional fashion rather than to conduct machine learning. Thus, it is often the case that raw data, or even downstream processed data is not in a form amenable to machine learning. We explore the construction of machine learning datasets and we ask: what elements define effective machine learning datasets? We define effective machine learning datasets in astronomy to be formed with well-defined data points, structure, and metadata. We discuss why these elements are important for astronomical applications and ways to put them in practice. We posit that these qualities not only make the data suitable for machine learning, they also help to foster usable, reusable, and replicable science practices. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.14401v2

The performance of the MAGIC telescopes using deep convolutional neural networks with CTLearn by T. Miener et al. on Tuesday 29 November The Major Atmospheric Gamma Imaging Cherenkov (MAGIC) telescope system is located on the Canary Island of La Palma and inspects the very high-energy (VHE, few tens of GeV and above) gamma-ray sky. MAGIC consists of two imaging atmospheric Cherenkov telescopes (IACTs), which capture images of the air showers originating from the absorption of gamma rays and cosmic rays by the atmosphere, through the detection of Cherenkov photons emitted in the shower. The sensitivity of IACTs to gamma-ray sources is mainly determined by the ability to reconstruct the properties (type, energy, and arrival direction) of the primary particle generating the air shower. The state-of-the-art IACT pipeline for shower reconstruction is based on the parameterization of the shower images by extracting geometric and stereoscopic features and machine learning algorithms like random forest or boosted decision trees. In this contribution, we explore deep convolutional neural networks applied directly to the pixelized images of the camera as a promising method for IACT full-event reconstruction and present the performance of the method on observational data using CTLearn, a package for IACT event reconstruction that exploits deep learning. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16009v1

The Spectroscopic Classification of Astronomical Transients SCAT Survey: Overview, Pipeline Description, Initial Results, and Future Plans by M. A. Tucker et al. on Tuesday 29 November We present the Spectroscopic Classification of Astronomical Transients (SCAT) survey, which is dedicated to spectrophotometric observations of transient objects such as supernovae and tidal disruption events. SCAT uses the SuperNova Integral-Field Spectrograph (SNIFS) on the University of Hawai'i 2.2-meter (UH2.2m) telescope. SNIFS was designed specifically for accurate transient spectrophotometry, including absolute flux calibration and host-galaxy removal. We describe the data reduction and calibration pipeline including spectral extraction, telluric correction, atmospheric characterization, nightly photometricity, and spectrophotometric precision. We achieve $\lesssim 5\%$ spectrophotometry across the full optical wavelength range ($3500-9000~\r{A}$) under photometric conditions. The inclusion of photometry from the SNIFS multi-filter mosaic imager allows for decent spectrophotometric calibration ($10-20\%$) even under unfavorable weather/atmospheric conditions. SCAT obtained $\approx 640$ spectra of transients over the first 3 years of operations, including supernovae of all types, active galactic nuclei, cataclysmic variables, and rare transients such as superluminous supernovae and tidal disruption events. These observations will provide the community with benchmark spectrophotometry to constrain the next generation of hydrodynamic and radiative transfer models. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2210.09322v2

GECAM Localization of High Energy Transients and the Systematic Error by Yi Zhao et al. on Tuesday 29 November Gravitational wave high-energy Electromagnetic Counterpart All-sky Monitor (GECAM) is a pair of microsatellites (i.e. GECAM-A and GECAM-B) dedicated to monitoring gamma-ray transients including gravitational waves high-energy electromagnetic counterparts, Gamma-ray Bursts, Soft Gamma-ray Repeaters, Solar Flares and Terrestrial Gamma-ray Flashes. Since launch in December 2020, GECAM-B has detected hundreds of astronomical and terrestrial events. For these bursts, localization is the key for burst identification and classification as well as follow-up observations in multi-wavelength. Here, we propose a Bayesian localization method with Poisson data with Gaussian background profile likelihood to localize GECAM bursts based on the burst counts distribution in detectors with different orientations. We demonstrate that this method can work well for all kinds of bursts, especially for extremely short ones. In addition, we propose a new method to estimate the systematic error of localization based on a confidence level test, which can overcome some problems of the existing method in literature. We validate this method by Monte Carlo simulations, and then apply it to a burst sample with accurate location and find that the mean value of the systematic error of GECAM-B localization is $\sim 2.5^{\circ}$. By considering this systematic error, we can obtain a reliable localization probability map for GECAM bursts. Our methods can be applied to other gamma-ray monitors. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15570v1

PERISTOLE: PackagE that geneRates tIme delay plotS caused by graviTatiOnaL lEnsing by T. S. Sachin Venkatesh et al. on Tuesday 29 November We present PERISTOLE to study the various time delays associated with the pulsar rotation and other general relativistic aspects of binary pulsars. It is made available as an open-source python package which takes some parameters of the double pulsar system as input and outputs the rotational and latitudinal lensing delays along with the geometric and Shapiro delays that arise due to gravitational lensing. This package was intended to provide a way to quickly analyse, evaluate and study the differences between variations of the same systems and also to quantify the consequences that different parameters have over the system. Through this research note, we briefly describe the motivation behind PERISTOLE and showcase its capabilities using the only double pulsar system ever found, J0737-3039. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16036v1

Spectroscopic time series performance of the Mid-Infrared Instrument on the JWST by Jeroen Bouwman et al. on Tuesday 29 November We present here the first ever mid-infrared spectroscopic time series observation of the transiting exoplanet \object{L 168-9 b} with the Mid-Infrared Instrument (MIRI) on the James Webb Space Telescope. The data were obtained as part of the MIRI commissioning activities, to characterize the performance of the Low Resolution Spectroscopy (LRS) mode for these challenging observations. To assess the MIRI LRS performance, we performed two independent analyses of the data. We find that with a single transit observation we reached a spectro-photometric precision of $\sim$50 ppm in the 7-8~\micron~range at R=50, consistent with $\sim$25 ppm systematic noise. The derived band averaged transit depth is 524~$\pm$~15~ppm and 547~$\pm$~13~ppm for the two applied analysis methods, respectively, recovering the known transit depth to within 1~$\sigma$. The measured noise in the planet's transmission spectrum is approximately 15-20\% higher than random noise simulations over wavelengths $6.8 \lesssim \lambda \lesssim 11$ $\mu$m. We observed an excess noise at shorter wavelengths, for which possible causes are discussed. This performance was achieved with limited in-flight calibration data, demonstrating the future potential of MIRI for the characterization of exoplanet atmospheres. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16123v1

Bayesian modelling of scattered light in the LIGO interferometers by Rhiannon Udall et al. on Tuesday 29 November Excess noise from scattered light poses a persistent challenge in the analysis of data from gravitational wave detectors such as LIGO. We integrate a physically motivated model for the behavior of these "glitches" into a standard Bayesian analysis pipeline used in gravitational wave science. This allows for the inference of the free parameters in this model, and subtraction of these models to produce glitch-free versions of the data. We show that this inference is an effective discriminator of the presence of the features of these glitches, even when those features may not be discernible in standard visualizations of the data. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15867v1

A Bayesian approach to RFI mitigation by S. A. K. Leeney et al. on Tuesday 29 November Radio Frequency Interference (RFI) is an endemic problem in radio astronomy. Information in contaminated frequency channels is lost and it can lead to significant systematic error if not properly modelled. In this paper we propose a RFI mitigation methodology that takes a Bayesian approach, where contaminated data is both flagged and managed as part of a single step fitting process. To the authors knowledge, our approach is first-of-its-kind. We provide a proof-of-concept of our methods which are also tested and shown to be effective on both a simple toy model and when incorporated into the Bayesian data analysis pipeline for REACH (a modern cosmological radio experiment). arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15448v1

FIREBall-2: flight preparation of a proven balloon payload to image the intermediate redshift circumgalactic medium by Vincent Picouet et al. on Tuesday 29 November FIREBall-2 is a stratospheric balloon-borne 1-m telescope coupled to a UV multi-object slit spectrograph designed to map the faint UV emission surrounding z~0.7 galaxies and quasars through their Lyman-alpha line emission. This spectro-imager had its first launch on September 22nd 2018 out of Ft. Sumner, NM, USA. Because the balloon was punctured, the flight was abruptly interrupted. Instead of the nominal 8 hours above 32 km altitude, the instrument could only perform science acquisition for 45 minutes at this altitude. In addition, the shape of the deflated balloon, combined with a full Moon, revealed a severe off-axis scattered light path, directly into the UV science detector and about 100 times larger than expected. In preparation for the next flight, and in addition to describing FIREBall-2's upgrade, this paper discusses the exposure time calculator (ETC) that has been designed to analyze the instrument's optimal performance (explore the instrument's limitations and subtle trade-offs). arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15491v1

A Bayesian approach to RFI mitigation by S. A. K. Leeney et al. on Tuesday 29 November Radio Frequency Interference (RFI) is an endemic problem in radio astronomy. Information in contaminated frequency channels is lost and it can lead to significant systematic error if not properly modelled. In this paper we propose a RFI mitigation methodology that takes a Bayesian approach, where contaminated data is both flagged and managed as part of a single step fitting process. To the authors knowledge, our approach is first-of-its-kind. We provide a proof-of-concept of our methods which are also tested and shown to be effective on both a simple toy model and when incorporated into the Bayesian data analysis pipeline for REACH (a modern cosmological radio experiment). arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15448v1

Satellite Constellation Avoidance with the Rubin Observatory Legacy Survey of Space and Time by Jinghan Alina Hu et al. on Tuesday 29 November We investigate a novel satellite avoidance strategy to mitigate the impact of large commercial satellite constellations in low-Earth orbit on the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST). We simulate the orbits of currently planned Starlink and OneWeb constellations ($\sim$40,000 satellites) to test how effectively an upgraded Rubin scheduler algorithm can avoid them, and assess how the overall survey is affected. Given a reasonably accurate satellite orbit forecast, we find it is possible to adjust the scheduler algorithm to effectively avoid some satellites. Overall, sacrificing 10% of LSST observing time to avoid satellites reduces the fraction of LSST visits with streaks by a factor of two. Whether such a mitigation will be required depends on the overall impact of streaks on science, which is not yet well quantified. This is due to a lack of adequate information about satellite brightness distributions as well as the impact of glints and low surface brightness residuals on alert purity and systematic errors in cosmological parameter estimation. A significant increase in the number of satellites or their brightness during Rubin Operations may make implementing this satellite avoidance strategy worthwhile. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15908v1

Elements of effective machine learning datasets in astronomy by Bernie Boscoe et al. on Tuesday 29 November In this work, we identify elements of effective machine learning datasets in astronomy and present suggestions for their design and creation. Machine learning has become an increasingly important tool for analyzing and understanding the large-scale flood of data in astronomy. To take advantage of these tools, datasets are required for training and testing. However, building machine learning datasets for astronomy can be challenging. Astronomical data is collected from instruments built to explore science questions in a traditional fashion rather than to conduct machine learning. Thus, it is often the case that raw data, or even downstream processed data is not in a form amenable to machine learning. We explore the construction of machine learning datasets and we ask: what elements define effective machine learning datasets? We define effective machine learning datasets in astronomy to be formed with well-defined data points, structure, and metadata. We discuss why these elements are important for astronomical applications and ways to put them in practice. We posit that these qualities not only make the data suitable for machine learning, they also help to foster usable, reusable, and replicable science practices. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.14401v1

The Athena X-ray Integral Field Unit: a consolidated design for the system requirement review of the preliminary definition phase by Didier Barret et al. on Tuesday 29 November The Athena X-ray Integral Unit (X-IFU) is the high resolution X-ray spectrometer, studied since 2015 for flying in the mid-30s on the Athena space X-ray Observatory, a versatile observatory designed to address the Hot and Energetic Universe science theme, selected in November 2013 by the Survey Science Committee. Based on a large format array of Transition Edge Sensors (TES), it aims to provide spatially resolved X-ray spectroscopy, with a spectral resolution of 2.5 eV (up to 7 keV) over an hexagonal field of view of 5 arc minutes (equivalent diameter). The X-IFU entered its System Requirement Review (SRR) in June 2022, at about the same time when ESA called for an overall X-IFU redesign (including the X-IFU cryostat and the cooling chain), due to an unanticipated cost overrun of Athena. In this paper, after illustrating the breakthrough capabilities of the X-IFU, we describe the instrument as presented at its SRR, browsing through all the subsystems and associated requirements. We then show the instrument budgets, with a particular emphasis on the anticipated budgets of some of its key performance parameters. Finally we briefly discuss on the ongoing key technology demonstration activities, the calibration and the activities foreseen in the X-IFU Instrument Science Center, and touch on communication and outreach activities, the consortium organisation, and finally on the life cycle assessment of X-IFU aiming at minimising the environmental footprint, associated with the development of the instrument. Thanks to the studies conducted so far on X-IFU, it is expected that along the design-to-cost exercise requested by ESA, the X-IFU will maintain flagship capabilities in spatially resolved high resolution X-ray spectroscopy, enabling most of the original X-IFU related scientific objectives of the Athena mission to be retained. (abridged). arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2208.14562v2

Elements of effective machine learning datasets in astronomy by Bernie Boscoe et al. on Monday 28 November In this work, we identify elements of effective machine learning datasets in astronomy and present suggestions for their design and creation. Machine learning has become an increasingly important tool for analyzing and understanding the large-scale flood of data in astronomy. To take advantage of these tools, datasets are required for training and testing. However, building machine learning datasets for astronomy can be challenging. Astronomical data is collected from instruments built to explore science questions in a traditional fashion rather than to conduct machine learning. Thus, it is often the case that raw data, or even downstream processed data is not in a form amenable to machine learning. We explore the construction of machine learning datasets and we ask: what elements define effective machine learning datasets? We define effective machine learning datasets in astronomy to be formed with well-defined data points, structure, and metadata. We discuss why these elements are important for astronomical applications and ways to put them in practice. We posit that these qualities not only make the data suitable for machine learning, they also help to foster usable, reusable, and replicable science practices. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.14401v1

Characterisation of the MUSIC ASIC for large-area silicon photomultipliers for gamma-ray astronomy by Nicolas De Angelis et al. on Monday 28 November Large-area silicon photomultipliers (SiPMs) are desired in many applications where large surfaces have to be covered. For instance, a large area SiPM has been developed by Hamamatsu Photonics in collaboration with the University of Geneva, to equip gamma-ray cameras employed in imaging atmospheric Cherenkov telescopes. Being the sensor about 1 cm$^2$, a suitable preamplification electronics has been investigated in this work, which can deal with long pulses induced by the large capacitance of the sensor. The so-called Multiple Use SiPM Integrated Circuit (MUSIC), developed by the ICCUB (University of Barcelona), is investigated as a potential front-end ASIC, suitable to cover large area photodetection planes of gamma-ray telescopes. The ASIC offers an interesting pole-zero cancellation (PZC) that allows dealing with long SiPM signals, the feature of active summation of up to 8 input channels into a single differential output and it can offer a solution for reducing power consumption compared to discrete solutions. Measurements and simulations of MUSIC coupled to two SiPMs developed by Hamamatsu are considered and the ASIC response is characterized. The 5$^{th}$ generation sensor of the Low Cross Talk technology coupled to MUSIC turns out to be a good solution for gamma-ray cameras. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.14022v1