JWST NIRCam Defocused Imaging: Photometric Stability Performance and How it Can Sense Mirror Tilts
Wednesday, November 30, 2022 • Duration 01:04
JWST NIRCam Defocused Imaging: Photometric Stability Performance and How it Can Sense Mirror Tilts by Everett Schlawin et al. on Wednesday 30 November
We use JWST NIRCam short wavelength photometry to capture a transit
lightcurve of the exoplanet HAT-P-14 b to assess performance as part of
instrument commissioning. The short wavelength precision is 152 ppm per 27
second integration as measured over the full time series compared to a
theoretical limit of 107 ppm, after corrections to spatially correlated 1/f
noise. Persistence effects from charge trapping are well fit by an exponential
function with short characteristic timescales, settling on the order of 5-15
minutes. The short wavelength defocused photometry is also uniquely well suited
to measure the realtime wavefront error of JWST. Analysis of the images and
reconstructed wavefront maps indicate that two different hexagonal primary
mirror segments exhibited "tilt events" where they changed orientation rapidly
in less than ~1.4 seconds. In some cases, the magnitude and timing of the flux
jumps caused by tilt events can be accurately predicted with a telescope model.
These tilt events can be sensed by simultaneous longer-wavelength NIRCam grism
spectral images alone in the form of changes to the point spread function,
diagnosed from the FWHM. They can also be sensed with the FGS instrument from
difference images. Tilt events possibly from sudden releases of stress in the
backplane structure behind the mirrors were expected during the commissioning
period because they were found in ground-based testing. Tilt events have shown
signs of decreasing in frequency but have not disappeared completely. The
detectors exhibit some minor (less than 1%) deviations from linear behavior in
the first few groups of each integration, potentially impacting absolute fluxes
and transit depths on bright targets where only a handful of groups are
possible. Overall, the noise is within 50% of the theoretical photon noise and
read noise. This bodes well for high precision time series measurements.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16727v1
Spectroscopic time series performance of the Mid-Infrared Instrument on the JWST
Wednesday, November 30, 2022 • Duration 00:56
Spectroscopic time series performance of the Mid-Infrared Instrument on the JWST by Jeroen Bouwman et al. on Wednesday 30 November
We present here the first ever mid-infrared spectroscopic time series
observation of the transiting exoplanet \object{L 168-9 b} with the
Mid-Infrared Instrument (MIRI) on the James Webb Space Telescope. The data were
obtained as part of the MIRI commissioning activities, to characterize the
performance of the Low Resolution Spectroscopy (LRS) mode for these challenging
observations. To assess the MIRI LRS performance, we performed two independent
analyses of the data. We find that with a single transit observation we reached
a spectro-photometric precision of $\sim$50 ppm in the 7-8~\micron~range at
R=50, consistent with $\sim$25 ppm systematic noise. The derived band averaged
transit depth is 524~$\pm$~15~ppm and 547~$\pm$~13~ppm for the two applied
analysis methods, respectively, recovering the known transit depth to within
1~$\sigma$. The measured noise in the planet's transmission spectrum is
approximately 15-20\% higher than random noise simulations over wavelengths
$6.8 \lesssim \lambda \lesssim 11$ $\mu$m. We observed an excess noise at
shorter wavelengths, for which possible causes are discussed. This performance
was achieved with limited in-flight calibration data, demonstrating the future
potential of MIRI for the characterization of exoplanet atmospheres.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16123v1
Using a Conditional Generative Adversarial Network to Control the Statistical Characteristics of Generated Images for IACT Data Analysis
Wednesday, November 30, 2022 • Duration 00:57
Using a Conditional Generative Adversarial Network to Control the Statistical Characteristics of Generated Images for IACT Data Analysis by Julia Dubenskaya et al. on Wednesday 30 November
Generative adversarial networks are a promising tool for image generation in
the astronomy domain. Of particular interest are conditional generative
adversarial networks (cGANs), which allow you to divide images into several
classes according to the value of some property of the image, and then specify
the required class when generating new images. In the case of images from
Imaging Atmospheric Cherenkov Telescopes (IACTs), an important property is the
total brightness of all image pixels (image size), which is in direct
correlation with the energy of primary particles. We used a cGAN technique to
generate images similar to whose obtained in the TAIGA-IACT experiment. As a
training set, we used a set of two-dimensional images generated using the TAIGA
Monte Carlo simulation software. We artificiallly divided the training set into
10 classes, sorting images by size and defining the boundaries of the classes
so that the same number of images fall into each class. These classes were used
while training our network. The paper shows that for each class, the size
distribution of the generated images is close to normal with the mean value
located approximately in the middle of the corresponding class. We also show
that for the generated images, the total image size distribution obtained by
summing the distributions over all classes is close to the original
distribution of the training set. The results obtained will be useful for more
accurate generation of realistic synthetic images similar to the ones taken by
IACTs.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15807v1
Adding Workflow Management Flexibility to LSST Pipelines Execution
Wednesday, November 30, 2022 • Duration 00:29
Adding Workflow Management Flexibility to LSST Pipelines Execution by Michelle Gower et al. on Wednesday 30 November
Data processing pipelines need to be executed at scales ranging from small
runs up through large production data release runs resulting in millions of
data products. As part of the Rubin Observatory's pipeline execution system,
BPS is the abstraction layer that provides an interface to different Workflow
Management Systems (WMS) such as HTCondor and PanDA. During the submission
process, the pipeline execution system interacts with the Data Butler to
produce a science-oriented execution graph from algorithmic tasks. BPS converts
this execution graph to a workflow graph and then uses a WMS-specific plugin to
submit and manage the workflow. Here we will discuss the architectural design
of this interface and report briefly on the recent production of the Data
Preview 0.2 release and how the system is used by pipeline developers.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15795v1
Optimal frequency-domain analysis for spacecraft time series: Introducing the missing-data multitaper power spectrum estimator
Wednesday, November 30, 2022 • Duration 01:02
Optimal frequency-domain analysis for spacecraft time series: Introducing the missing-data multitaper power spectrum estimator by Sarah E. Dodson-Robinson et al. on Wednesday 30 November
While the Lomb-Scargle periodogram is foundational to astronomy, it has a
significant shortcoming: its variance does not decrease as more data are
acquired. Statisticians have a 60-year history of developing
variance-suppressing power spectrum estimators, but most are not used in
astronomy because they are formulated for time series with uniform observing
cadence and without seasonal or daily gaps. Here we demonstrate how to apply
the missing-data multitaper power spectrum estimator to spacecraft data with
uniform time intervals between observations but missing data during thruster
fires or momentum dumps. The F-test for harmonic components may be applied to
multitaper power spectrum estimates to identify statistically significant
oscillations that would not rise above a white noise-based false alarm level.
Multitapering improves the dynamic range of the power spectrum estimate and
suppresses spectral window artifacts. We demonstrate multitapering on
simultaneous measurements of the interplanetary magnetic field and the solar
10.7-cm radio flux, finding high coherence at frequencies associated with the
sun's activity cycle and quasibiennial oscillations. Next we show that the
multitaper--F-test combination applied to Kepler observations of KIC 6102338
detects differential rotation without requiring iterative sinusoid fitting and
subtraction. Significant signals reside at harmonics of both rotation
frequencies and suggest an antisolar rotation profile. Finally, we demonstrate
the missing-data multitaper version of complex demodulation, which extracts the
low-frequency envelope from a modulated signal. We argue that multitaper power
spectrum estimators should be used for all time series with regular observing
cadence.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16549v1
Estimating effective wind speed from Gemini Planet Imager's adaptive optics data using covariance maps
Wednesday, November 30, 2022 • Duration 01:07
Estimating effective wind speed from Gemini Planet Imager's adaptive optics data using covariance maps by Daniel M. Levinstein et al. on Wednesday 30 November
The Earth's turbulent atmosphere results in speckled and blurred images of
astronomical objects when observed by ground based visible and near-infrared
telescopes. Adaptive optics (AO) systems are employed to reduce these
atmospheric effects by using wavefront sensors (WFS) and deformable mirrors.
Some AO systems are not fast enough to correct for strong, fast, high
turbulence wind layers leading to the wind butterfly effect, or wind-driven
halo, reducing contrast capabilities in coronagraphic images. Estimating the
effective wind speed of the atmosphere allows us to calculate the atmospheric
coherence time. This is not only an important parameter to understand for site
characterization but could be used to help remove the wind butterfly in post
processing. Here we present a method for estimating the atmospheric effective
wind speed from spatio-temporal covariance maps generated from pseudo open-loop
(POL) WFS data. POL WFS data is used as it aims to reconstruct the full
wavefront information when operating in closed-loop. The covariance maps show
how different atmospheric turbulent layers traverse the telescope. Our method
successfully recovered the effective wind speed from simulated WFS data
generated with the soapy python library. The simulated atmospheric turbulence
profiles consist of two turbulent layers of ranging strengths and velocities.
The method has also been applied to Gemini Planet Imager (GPI) AO WFS data.
This gives insight into how the effective wind speed can affect the wind-driven
halo seen in the AO image point spread function. In this paper, we will present
results from simulated and GPI WFS data.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16441v1
Bayesian modelling of scattered light in the LIGO interferometers
Wednesday, November 30, 2022 • Duration 00:24
Bayesian modelling of scattered light in the LIGO interferometers by Rhiannon Udall et al. on Wednesday 30 November
Excess noise from scattered light poses a persistent challenge in the
analysis of data from gravitational wave detectors such as LIGO. We integrate a
physically motivated model for the behavior of these "glitches" into a standard
Bayesian analysis pipeline used in gravitational wave science. This allows for
the inference of the free parameters in this model, and subtraction of these
models to produce glitch-free versions of the data. We show that this inference
is an effective discriminator of the presence of the features of these
glitches, even when those features may not be discernible in standard
visualizations of the data.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15867v1
Panel Discussion: Practical Problem Solving for Machine Learning
Wednesday, November 30, 2022 • Duration 00:19
Panel Discussion: Practical Problem Solving for Machine Learning by Guillermo Cabrera et al. on Wednesday 30 November
Machine Learning is a powerful tool for astrophysicists, which has already
had significant uptake in the community. But there remain some barriers to
entry, relating to proper understanding, the difficulty of interpretability,
and the lack of cohesive training. In this discussion session we addressed some
of these questions, and suggest how the field may move forward.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16782v1
Star & planet formation: Upcoming opportunities in the space-based infrared
Wednesday, November 30, 2022 • Duration 00:33
Star & planet formation: Upcoming opportunities in the space-based infrared by Floris van der Tak. on Wednesday 30 November
While ALMA and JWST are revolutionizing our view of star and planet formation
with their unprecedented sensitivity and resolution at submillimeter and
near-IR wavelengths, many outstanding questions can only be answered with
observations in the thermal (mid- and far-) infrared domain. Many of these
questions require space-based observations, to achieve the necessary
sensitivity and/or wavelength coverage. In particular, how do interstellar
clouds develop filamentary structures and dense cores? What are the masses and
luminosities of objects at the earliest stages of star formation? What are the
gas masses of planet-forming disks, and how do these disks disperse during
planet formation? How is refractory and volatile material distributed within
the disks, and how does this evolve with time? This article reviews how
upcoming and planned balloon-borne and space-based telescopes for the mid- and
far-infrared will address these questions, and outlines which further missions
will be needed beyond 2030, when the ELTs will be in full operation.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15149v2
3UCubed: The IMAP Student Collaboration CubeSat Project
Wednesday, November 30, 2022 • Duration 00:54
3UCubed: The IMAP Student Collaboration CubeSat Project by Marcus Alfred et al. on Wednesday 30 November
The 3UCubed project is a 3U CubeSat being jointly developed by the University
of New Hampshire, Sonoma State University, and Howard University as a part of
the NASA Interstellar Mapping and Acceleration Probe, IMAP, student
collaboration. This project comprises of a multidisciplinary team of
undergraduate students from all three universities. The mission goal of the
3UCubed is to understand how Earths polar upper atmosphere the thermosphere in
Earths auroral regions, responds to particle precipitation and solar wind
forcing, and internal magnetospheric processes.
3UCubed includes two instruments with rocket heritage to achieve the science
mission: an ultraviolet photomultiplier tube, UVPMT, and an electron retarding
potential analyzer ERPA. The spacecraft bus consists of the following
subsystems: Attitude Determination and Control, Command and Data Handling,
Power, Communication, Structural, and Thermal.
Currently, the project is in the post-PDR stage, starting to build and test
engineering models to develop a FlatSat prior to critical design review in
2023. The goal is to launch at least one 3U CubeSat to collect science data
close to the anticipated peak of Solar Cycle 25 around July 2025. Our mother
mission, IMAP, is also projected to launch in 2025, which will let us jointly
analyze the science data of the main mission, providing the solar wind
measurements and inputs to the magnetosphere with that of 3UCubed, providing
the response of Earths cusp to these inputs.
arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15781v1
Discover shows related to Astro arXiv | astro-ph.IM, based on actual content similarities. Explore podcasts with similar topics, themes, and formats, backed by real data.
