Explore every episode of the podcast We Built A Thing
Dive into the complete episode list for We Built A Thing. Each episode is cataloged with detailed descriptions, making it easy to find and explore specific topics. Keep track of all episodes from your favorite podcast and never miss a moment of insightful content.
Rows per page:
50
1–50 of 356
Title
Pub. Date
Duration
329 - Never Wearing A Suit Again
05 Nov 2025
00:57:36
In this conversation, Bruce and Mark talk about being right eye dominant or left eye dominant. Also, epoxy countertops go oh so wrong. Bruce loves Arm-R-Seal for figured woods. Plus, a ton more!
We are makers, full-time dads and have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.
328 - When the Gipsy Comes to Play It's Usually Wet
29 Oct 2025
00:58:10
In this conversation, Bruce and Mark talk about pouring epoxy countertops, cutting a hole for a drop-in sink, rabbeting a picture frame. Plus, a ton more!
We are makers, full-time dads and have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.
We are back again this week with our wives, Rebecca and Katie, talking all things renovation and building. The title was an attempt at making a sequel movie title like you used to see in the 90's. Hope you enjoy this chat with all of us, detailing Mark's renovation in the kitchen and living room and Bruce's house build process thus far.
OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Chad Green -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one
Support our sponsors:
TOOL CODES: -MagSwitch: "WBAT" -SurfPrep: "FISHER10" -Bumblechutes: "FISHER10" -Starbond: "BRUCEAULRICH" -Brunt Workgear: "GUNFLINT10" -Rotoboss: "GUNFLINT" -Merlin Moisture Meters: "FISHER10" -Montana Brand Tools: "GUNFLINT10" -Monport: "GUNFLINT6" -Stone Coat Epoxy: Gunflint -MAS Epoxy: FLINT -YesWelder: GUNFLINT10 -Millner-Haufen Tool Co: "ULRICH20" for 20% off -SmartSquareTools.com: "FISHER10" -Camel City Mill: GUNFLINT10 -Arbortech Tools: "BRUCEAULRICH" for 10% off -HighCountryTool.com: "FISHER10" for 10% off -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210
We are makers, full-time dads and have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.
In this episode, Mark gets shorted on lumber. Bruce gets a ton of material delivered to his land for a pretty serious tractor shed. Drew is making some Christmas lanterns & making a sign out of a slab. Plus a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
228 - Bananas In A Good Way
29 Nov 2023
01:02:38
In this episode, Mark has to visit a lumber provider, the horror. Bruce trips a SawStop brake. Drew puts up Christmas lights. Plus a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
227 - 2500 Strips
22 Nov 2023
00:59:41
In this episode, Mark is still in Kentucky...and gets to record with Bruce in person. Bruce puts out a new video about some floating shelves for shoes in the closet renovation series. Drew published his night stand video. Watch it here: https://youtu.be/p4G0HPB2syY?si=e-A7-kQa0suFAFuD Plus a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
226 - Zzzzzink Dead
15 Nov 2023
00:58:50
In this episode, Mark visits Kentucky. Bruce leaves Kentucky. Drew needs to change his logo. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
225 - Endoscopy
08 Nov 2023
00:57:30
In this episode, Mark has some expensive vet bills. Bruce makes some modern adirondak chairs. Drew messed up some walnut on his nightstand builds. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
224 - Mark Doesn't Prance
01 Nov 2023
01:02:15
In this episode, Mark rips out some skylights. Bruce makes an unnecessary walnut island top. Drew bakes some wood in the oven. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
223 - You're Pretty Basic
25 Oct 2023
01:01:49
In this episode, Mark goes hunting with his son and works some more on the concealment cabinet. Bruce does another craft show...find out the results. Drew passes on a laser and dreams up some more projects. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
222 - I'm Gonna Send It
18 Oct 2023
00:58:58
In this episode, Mark keeps a veneer-perfect walnut log all for himself. Bruce published episode 3 of the Master Closet Renovation series on his channel. Watch here: https://youtu.be/Vim52WpD3OQ?si=kGywL_fN3B0IEqWu . Drew published another laser video, but this time, show's how to make money with it. Watch it here: https://youtu.be/yRZdyQZlheI?si=ExNTAGHYOKue_sqc . Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
221 - Just Can't Truss'em
11 Oct 2023
01:01:46
In this episode, Mark plots an apple launcher. Also, he launched the video about the unnecessary walnut bandsaw door. Bruce talks about the work he did on a work trip to Hilton Head Island. Drew did a progressive dinner on a golf course. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
220 - Relentless Toxic Bears
04 Oct 2023
01:00:08
In this episode, Mark tells about some of the different shooting targets he welded up and just how they work. They're pretty cool. Bruce dives in a dumpster for some boards (what's new). Drew Makes some sporting clay trophies. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
318 - Wives of We Built A Thing Talk Rennovation
20 Aug 2025
01:03:19
In this episode, Mark's wife, Katie, and Bruce's wife, Rebecca, hopped on the mics with the guys to discuss renovation, house building and prep and everything in between!
OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Damon Moran -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Chad Green -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one
Support our sponsors:
TOOL CODES: -MagSwitch: "WBAT" -SurfPrep: "FISHER10" -Bumblechutes: "FISHER10" -Starbond: "BRUCEAULRICH" -Brunt Workgear: "GUNFLINT10" -Rotoboss: "GUNFLINT" -Merlin Moisture Meters: "FISHER10" -Montana Brand Tools: "GUNFLINT10" -Monport: "GUNFLINT6" -Stone Coat Epoxy: Gunflint -MAS Epoxy: FLINT -YesWelder: GUNFLINT10 -Millner-Haufen Tool Co: "ULRICH20" for 20% off -SmartSquareTools.com: "FISHER10" -Camel City Mill: GUNFLINT10 -Arbortech Tools: "BRUCEAULRICH" for 10% off -HighCountryTool.com: "FISHER10" for 10% off -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210
We are makers, full-time dads and have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.
In this episode, Mark deals with a skunk smell...in his house! Bruce released episode 1 of his Master Closet Renovation series. Check it out here: https://youtu.be/mVjkc6L_mmU?si=wllsuMRRHjANNxFF . Drew has lanterns up the wazoo...I mean, he's making and selling a ton of them. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
New: Glenn Scifres
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
218 - Catfish on a Rollercoaster
20 Sep 2023
01:08:47
In this episode, Mark is editing his walnut bandsaw door video. Bruce buys and uses some cheap templating bits on his countertops. Drew buys some funky oak slabs. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
217 - Sawing with a Hammer
13 Sep 2023
01:07:39
In this episode, Mark published a new video about adding unnecessary walnut trim to his gun safe as well as walnut socket covers. Bruce builds a bench with just a circular saw. Drew sells a ton of lanterns. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
216 - Wide-eyed Staring at the Ceiling
06 Sep 2023
01:08:28
In this episode, Mark makes some good progress on the unnecessary walnut bandsaw door. Bruce fights the good fight. Drew published the adirondak glider chair. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
215 - I Need Revenge
30 Aug 2023
00:58:02
In this episode, Mark aims to get revenge on some bees. Bruce explores an arboretum and makes a radius jig. Drew is so close on the adirondak gliders. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
214 - Shoulda Stayed in Bed
23 Aug 2023
01:00:41
In this episode, Mark gets an ouchy on his finger and releases a video about a standing desk. Watch it here: https://youtu.be/ZqnhjSxhg10. Bruce lays flooring and trim in the new closet and puts out the Part 2 video of his boys' bed builds. Watch it here: https://youtu.be/bArd2IGNpwQ. Drew looks forward to the next thing, the glider-adirondack chair. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
213 - Billy Bob Thornton
16 Aug 2023
01:02:57
In this episode, Mark does a dust collector showdown. Bruce already broke the tractor. Drew made a checklist of what you need to runaway. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
New: Alex Bischoff -Matt Paulson
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
212 - The Runaway Checklist
09 Aug 2023
01:00:21
In this episode, Mark does a dust collector showdown. Bruce already broke the tractor. Drew made a checklist of what you need to runaway. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
211 - Unless the Wind is Blowing
02 Aug 2023
00:59:12
In this episode, Mark proves stuff he has built in the past won't just melt in the rain. Bruce went to AWFS in Vegas. Drew works on an art piece. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
New: -Camp 27 Woodworking
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
210 - Fleet of Robot Mowers
26 Jul 2023
01:00:30
In this episode, Mark quizzes the guys on their door parts knowledge. Bruce sweats it out in a tyvek suit. Drew gets THAT deal on Prime Day. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
317 - Weird Specks in Concrete, DIY Spray Foam Process & Bruce Rants About Dogs
13 Aug 2025
00:48:23
In this episode, Mark finds goats behind his barn. Mark also talks all about the DIY spray foam process. Bruce rants about dogs. Plus a whole lot more!
OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Damon Moran -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Chad Green -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one
Support our sponsors:
TOOL CODES: -MagSwitch: "WBAT" -SurfPrep: "FISHER10" -Bumblechutes: "FISHER10" -Starbond: "BRUCEAULRICH" -Brunt Workgear: "GUNFLINT10" -Rotoboss: "GUNFLINT" -Merlin Moisture Meters: "FISHER10" -Montana Brand Tools: "GUNFLINT10" -Monport: "GUNFLINT6" -Stone Coat Epoxy: Gunflint -MAS Epoxy: FLINT -YesWelder: GUNFLINT10 -Millner-Haufen Tool Co: "ULRICH20" for 20% off -SmartSquareTools.com: "FISHER10" -Camel City Mill: GUNFLINT10 -Arbortech Tools: "BRUCEAULRICH" for 10% off -HighCountryTool.com: "FISHER10" for 10% off -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210
We are makers, full-time dads and have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.
In this episode, Mark goes full PC. Bruce fixes a dust collector remote. Drew talks Lord of the Rings. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
208 - It Slurped My Arm!
12 Jul 2023
01:02:54
In this episode, Mark gets to sleep in his tree fort, even though that wasn't his intention. Bruce runs into trouble with his ultimate master closet reno. Drew sets his sights on what is next for him. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
207 - Johnny Walnutseed
05 Jul 2023
00:59:15
In this episode, Mark finds some raccoons. Bruce gets his workout with a bunch of plywood. Drew tells some tales of fireworks. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
New: -Alex Bischoff -pFeF Workshop
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
206 - The Sound of My People
28 Jun 2023
00:59:18
In this episode, Mark tells more about his tree fort and all of the plans for that. Bruce travels to Mississippi, but still works. Drew finishes the Skittles game and the video will be out very soon as of the publishing of this. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
New: -Jonathan Grunden
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
205 - Double It And Raise the Power
21 Jun 2023
01:04:59
In this episode, Mark tells about an interesting car chase. Bruce released a new video about some interesting art pieces that are towel holders. Go watch it here: https://youtu.be/QAWQwvu5B8c Drew went to a Detroit Tigers game and is making good progress on the Skittles game. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
New: -Jason Bertels
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
204 - Drive It Off A Cliff
14 Jun 2023
01:05:33
In this episode, Mark put out a new video about a solid walnut door with a secret. Give it a watch! Bruce smashes a couple of fingers with a mallet while installing floors. Drew learns a few things about propane. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
New: -Stephen Goggin
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
203 - Your Car's Extended Warranty
07 Jun 2023
00:59:59
In this episode, Mark plans out his tree fort and drops some song lyrics. Drew asks his doctor about his car's extended warranty. Bruce works at the beach. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
202 - That Was Brutal!
31 May 2023
00:56:50
In this episode, Mark releases a new video about making a countertop from short boards. Bruce finally upgrades his OneFinity CNC. Drew reads some comments. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
201 - Tennis Court Battleship
24 May 2023
01:05:42
In this episode, Mark tells all about a new game he invented. Bruce messes up some beds. Drew experiments with making a 4th axis for his OneFinity CNC. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
200 - Bam! Purple Two Hundo!
17 May 2023
01:03:29
THANKS SO MUCH FOR TUNING IN EVERY WEEK! WE HAVE SOME SPECIAL MESSAGES SENT IN FROM LISTENERS, PEPPERED THROUGHOUT THIS 200TH EPISODE! In this episode, Mark discovers land. Bruce puts domino mortises in the wrong place. Drew makes a PURPLE sign. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
In this episode, Mark gets his electrical inspection and keeps building cabinets. Bruce hits a dove with his car, builds some cutting boards, snaps photos of people's walk-out basements. Plus a whole lot more!
OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Damon Moran -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Chad Green -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one
Support our sponsors:
TOOL CODES: -MagSwitch: "WBAT" -SurfPrep: "FISHER10" -Bumblechutes: "FISHER10" -Starbond: "BRUCEAULRICH" -Brunt Workgear: "GUNFLINT10" -Rotoboss: "GUNFLINT" -Merlin Moisture Meters: "FISHER10" -Montana Brand Tools: "GUNFLINT10" -Monport: "GUNFLINT6" -Stone Coat Epoxy: Gunflint -MAS Epoxy: FLINT -YesWelder: GUNFLINT10 -Millner-Haufen Tool Co: "ULRICH20" for 20% off -SmartSquareTools.com: "FISHER10" -Camel City Mill: GUNFLINT10 -Arbortech Tools: "BRUCEAULRICH" for 10% off -HighCountryTool.com: "FISHER10" for 10% off -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210
We are makers, full-time dads and have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.
In this episode, Mark thinks the robots are coming to get him. Bruce let's his boys pick out their own bed parts. Drew changes video editing software. Plus, a ton more!
Submit your voice memos with your favorite thing about the show recently. We will air it on episode 200! Email a voice memo to webuiltathing@gmail.com
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
198 - Completely Bear
03 May 2023
00:58:36
In this episode, Mark's wall in the man cave is completely bear. Also, he published another in the string of Man Cave videos. Check it out here: https://youtu.be/85gfgPnYCrY . Bruce got his Journeyman rail installed and is working on a spoil board solution. Drew finished up his recording studio. Plus, a ton more!
Submit your voice memos with your favorite thing about the show recently. We will air it on episode 200! Email a voice memo to webuiltathing@gmail.com
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
197 - Mancy
26 Apr 2023
00:56:44
In this episode, it rained pheasants for Mark. Bruce published a video about making an accent wall. Drew comes up with his own NATO alphabet. Plus, a ton more!
Submit your voice memos with your favorite thing about the show recently. We will air it on episode 200! Email a voice memo to webuiltathing@gmail.com
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Broken Lead Woodworks IG: https://bit.ly/38vQij8 -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
196 - Powered by Gerbils
19 Apr 2023
01:00:07
In this episode, Mark published another video about the man cave. Definitely check that out. Bruce pretty much wraps up his master bath and bed renovation. Drew installs a truck bed cover. Plus, a ton more!
Submit your voice memos with your favorite thing about the show recently. We will air it on episode 200!
Peragon Truck Bed Covers: https://www.peragon.com/ FISHER15 saves 15% on LimitedHD and Platinum models
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Broken Lead Woodworks IG: https://bit.ly/38vQij8 -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
195 - The Carbide Beavers
12 Apr 2023
01:01:32
In this episode, Mark does some birding. Bruce is sore from home improvement. Drew's kidney tries to live up to its calling and become a true stone mason. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Broken Lead Woodworks IG: https://bit.ly/38vQij8 -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
194 - Load Bearing Mirror
05 Apr 2023
01:01:15
In this episode, Mark still has piles of snow, but he's not letting that stop him from doing a ton of CNC work. Bruce is in the throws of a bunch of home improvement projects, including a cool accent wall in his bedroom. Drew finally shipped his last laser. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Broken Lead Woodworks IG: https://bit.ly/38vQij8 -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
New: -Cody Elkins
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
193 - Giant Snake Ball
29 Mar 2023
00:56:53
In this episode, Mark tells about giant snake balls and tells how the sausage is made. Bruce smacked a miter saw. Drew tracks some butterflies. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
192 - It's Ridiculous...and I Love It!
22 Mar 2023
00:56:34
In this episode, Mark publishes a walk-through of his new man cave. Bruce thinks he found THE plans for a house. Drew is setting up a recording studio. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
191 - I'm Gonna Frame You for Murder
15 Mar 2023
00:57:08
In this episode, Mark sells items at a gun show. Bruce starts a new YouTube channel, Dirt To Done. Go subscribe, it'll help him out: https://youtu.be/bSjPsPkR208 . Drew plans more for his next project. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
190 - Segway Owner's Manual
08 Mar 2023
00:59:47
In this episode, Mark's shower squirts the ceiling. Bruce makes a large sign. Drew starts a fire with his laser...not on purpose. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
315 - Sick Chickens, Fast Utility Shelving & Hand Planing Drawers
30 Jul 2025
00:52:28
In this episode, Mark has a sick chicken, hand planes some drawer fronts and is ready to spray foam. Bruce builds a really fast utility shelf using Yosemite Shelving brackets (link below), and squares up scrap OSB with a tracksaw.
OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Damon Moran -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Chad Green -Trevor -Mark Herrick @ Empty Nest Woodworks -Not That Aaron, the other one
Support our sponsors:
TOOL CODES: -MagSwitch: "WBAT" -SurfPrep: "FISHER10" -Bumblechutes: "FISHER10" -Starbond: "BRUCEAULRICH" -Brunt Workgear: "GUNFLINT10" -Rotoboss: "GUNFLINT" -Merlin Moisture Meters: "FISHER10" -Montana Brand Tools: "GUNFLINT10" -Monport: "GUNFLINT6" -Stone Coat Epoxy: Gunflint -MAS Epoxy: FLINT -YesWelder: GUNFLINT10 -Millner-Haufen Tool Co: "ULRICH20" for 20% off -SmartSquareTools.com: "FISHER10" -Camel City Mill: GUNFLINT10 -Arbortech Tools: "BRUCEAULRICH" for 10% off -HighCountryTool.com: "FISHER10" for 10% off -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210
We are makers, full-time dads and have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.
In this episode, Mark loses his tractor in a snow drift. Bruce builds a cat condo/scratcher with unnecessary walnut. Drew backs a bit manufacturer on Kickstarter. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
188 - 42 Folds
22 Feb 2023
00:55:43
In this episode, Mark is ready to forget one bathroom. He released two videos recently, so go check them out below if you haven't already. Bruce is about to make a bronze plaque holder. Drew is making a simple bookshelf. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
187 - Where's Waldo?
15 Feb 2023
00:56:06
In this episode, Mark gets some serious work done on the Man Cave. Drew see UFOs. Bruce plants trees and tries out new wireless mics. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH15" for 15% off Rotoboss: "GUNFLINT" Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns