Woodworker and recording engineer Kenny Varga joins Ben to discuss building furniture for some of the most famous recording studios in the world.

For more information about Woodworking In America 2024 - https://www.woodsmith.com/article/woodworking-in-america-2024/

Links from this episode can be found here - http://www.shoptalklive.com

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamentals

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@finewoodworking.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Mike, Anissa, and Ben discuss new the issue of FW, beveling bookshelves, bench height, and what direction to turn a table saw miter gauge.

Find out more about Woodworking In America here: https://www.finewoodworking.com/2024/07/23/woodworking-in-america-2024

Links from this episode can be found here - http://www.shoptalklive.com For more information about our eLearning courses - http://www.finewoodworking.com/elearning

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamentals

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@finewoodworking.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Mike, Anissa, and Ben discuss their lumber haulers, tolerances when cutting large joints, and safely cutting thin strips. 

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamentals

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@finewoodworking.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Links from this episode can be found here - http://www.shoptalklive.com  

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter  

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Links from this episode can be found here - http://www.shoptalklive.com  

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter  

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Links from this episode can be found here - http://www.shoptalklive.com  

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter  

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Ben interviews Garry Chinn who founded Garrett Wade 45 years ago to bring high-quality hand tools to a new market.

To mark its anniversary, the company will be selling commemorative tools, from bench planes to shop aprons to tape measures, so its customers can celebrate along with the company.

Links from this episode can be found here - http://www.shoptalklive.com  

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter  

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Sign up for Brian Boggs' webinar here: www.finewoodworking.com/shop-class

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Links from this episode can be found here - http://www.shoptalklive.com

Check out all of Gary's online lectures here.

You can also find Gary on Instagram, YouTube, Twitter, and Facebook.

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Amanda is joined by Owen Madden and Evan Court to discuss their work in production shops, how their backgrounds in other shops and schools effect their work flow, and their plans for the future.

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamentals

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@finewoodworking.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

This episode is sponsored by Lee Valley and Titebond

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for our webinar with Al Breed here: https://www.finewoodworking.com/2020/06/18/free-webinar-tools-and-the-furniture-maker-with-allan-breed

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

This episode is sponsored by Lee Valley and Titebond

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

This episode is sponsored by http://www.woodcraft.com

Check out Mike Farrington's youtube channel here: https://www.youtube.com/mikefarrington

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Andrew Hunter joins Vic and Ben to discuss sharpening, carpeted workshops, and one listener's dining table issues. Amanda talks to Sophie Glenn, a metalworker/woodworker who you should know!

Sophie's IG - https://www.instagram.com/arcburn_furniture/

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamentals

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@finewoodworking.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

This episode is sponsored by Woodcraft and Pony/Jorgenson

Click here to enter to win a Shaper Origin: http://www.finewoodworking.com/shapertools

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Click here to enter to win a Shaper Origin: http://www.finewoodworking.com/shapertools

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Click here to enter to win a Shaper Origin: http://www.finewoodworking.com/shapertools

Click here to enter the Fine Woodworking Live Military Scholarship: http://www.finewoodworkinglive.com/scholarship/

For more information on the American Association of Woodturners: http://www.woodturner.org

For more information on the 2020 Turning Symposium in Louisville, June 4-7, 2020: http://bit.ly/2wcI4Me

For more on Janet Collins: http://www.greenmountainwoodturning.com/

For more on Josh Friend: http://jfriendwoodworks.com/

This episode is sponsored by Woodcraft - http://www.Woodcraft.com

Check out the lineup for this year's Fine Woodworking Live here - https://www.finewoodworkinglive.com

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

One more day to enter the Woodpecker's Shop Upgrade Giveaway here: http://www.finewoodworking.com/woodpeckers

Check out the lineup for this year's Fine Woodworking Live here - https://www.finewoodworkinglive.com

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

This episode is brought to you by Maverick Abrasives. https://www.maverickabrasives.com/

Check out the lineup for this year's Fine Woodworking Live here - https://www.finewoodworkinglive.com

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewooworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

This episode is brought to you by Maverick Abrasives. https://www.maverickabrasives.com/

Check out the lineup for this year's Fine Woodworking Live here - https://:www.finewoodworkinglive.com

Links from this episode can be found here - https://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewooworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Shop Talk Live show notes are available here - https://www.shoptalklive.com

Become an UNLIMITED member today and get instant access to all FineWoodworking.com content. Start your free two week trial here: http://bit.ly/2m576Fl

For more Shop Talk Live or to submit a question: http://bit.ly/2mVJYd0

To see the newest issue of Fine Woodworking: http://bit.ly/2newDLh

This episode is brought to you by Maverick Abrasives. https://www.maverickabrasives.com/

Check out the lineup for this year's Fine Woodworking Live here - https://:www.finewoodworkinglive.com

Links from this episode can be found here - https://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewooworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

To see the newest issue of Fine Woodworking: http://bit.ly/2newDLh

This episode is brought to you by Maverick Abrasives. https://www.maverickabrasives.com/

Check out the lineup for this year's Fine Woodworking Live here - https://:www.finewoodworkinglive.com

Links from this episode can be found here: https://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewooworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Shop Talk Live show notes are available here - https://www.shoptalklive.com

Become an UNLIMITED member today and get instant access to all FineWoodworking.com content. Start your free two week trial here: http://bit.ly/2m576Fl

For more Shop Talk Live or to submit a question: http://bit.ly/2mVJYd0

To see the newest issue of Fine Woodworking: http://bit.ly/2newDLh

Bob Van Dyke joins Mike and Amanda to discuss dovetail layout lines, tambour doors, and designing to a specific board. Also, Amanda and Ben discuss the fading future of affordable table saws. 

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

Find out more about Fine Woodworking New England here: https://www.finewoodworking.com/2024/03/06/fine-woodworking-new-england-april-26-27

For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamentals

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@finewoodworking.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

This episode is brought to you by Maverick Abrasives. https://www.maverickabrasives.com/

Check out the lineup for this year's Fine Woodworking Live here - https://:www.finewoodworkinglive.com

This episode's poll, shop-music playlists and links can be found here - https://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewooworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited 

Shop Talk Live show notes are available here - https://www.shoptalklive.com

Become an UNLIMITED member today and get instant access to all FineWoodworking.com content. Start your free two week trial here: http://bit.ly/2m576Fl

For more Shop Talk Live or to submit a question: http://bit.ly/2mVJYd0

To see the newest issue of Fine Woodworking: http://bit.ly/2newDLh

This episode is brought to you by Maverick Abrasives.
https://www.maverickabrasives.com/

Sign up for the Fine Woodworking weekly eLetter - https://www.finewooworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Shop Talk Live show notes are available here - https://www.shoptalklive.com

The North Jersey Woodworkers Association or NJWA for short is a community of woodworkers of all types and levels of experience. We have some professionals, some beginners and every skill level in between. Our goal is to share our experience with one another and to support and grow the woodworking community in the Northern New Jersey area. Regardless of woodworking interest or level of experience, we invite you to join us. For directions, membership information and club activities follow this link: About NJWA.

Sign up for the Fine Woodworking weekly eLetter - https://www.finewooworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited 

Shop Talk Live show notes are available here - https://www.shoptalklive.com

John, Barry, and Ben discuss workbench stretchers, basement shop vs. garage shop, and a new chapter begins in the round vs. square mortise debate

Sign up for the Fine Woodworking weekly eLetter.

Sign up for a Fine Woodworking Unlimited membership.

Shop Talk Live show notes are available here.

Question 1: 

From Elijah:
I'm planning on building a floating media cabinet out of 5/4 cherry. The basic idea of the cabinet is an open box that looks like you can look through to the wall. However, it will actually have a false back made of 1/4" MDF painted the same color as the wall to hide all of the wires.
For this project I like the clean look of miter joints, but I am worried that it will not be strong enough. The cabinet will be about 48 inches wide, 10 inches tall, and 14 inches deep. Do I need to reinforce the miters somehow or will glueing in the false back strengthening it sufficiently?

• Strong and Handsome: Half-Blind Mitered Dovetails
• How to Cut Half-Blind Mitered Dovetails
• 3-D Shelves Enliven Any Room
• Add Muscle To Your Miters

Question 2:

From Reg:
I'm trying to make bird's eye maple legs that have face grain on all four sides.  Unlike (for eg.) white oak laminated legs, the side grain on bird's eye is obtrusively different and a lamination would be obvious if done in the white oak manner of laminating only on two sides.  So I think I need four-sided laminations, which seems to mean mitered laminations. What is the best way to go about this? I am assuming some core 4-square stock is the starting point. These are going to be Krenov-type legs, so thinly laminating finished leg seems out of the question.

Segment: All-Time Favorite Tool 

Mike: Holdfast

• Get a grip on your work

Ben: CNC used as a pin router

• The Pin Router

Anissa: Her marking gauges

• Shopmade Cutting Gauge
• Tool Test: Marking Gauges

Question 3:

From Dave:
What machinery can be bought vintage and what should be bought new(er_)? It seems as though this kind of discussion is all but exhausted when it comes to hand tools but I don't hear as much about the bigger purchases in the shop.
For instance, not much has changed for drill presses, so an old and stout model seems like a chance to save some money. Meanwhile, it's clear that table saws have improved dramatically with regards to safety and dust collection, so if a SawStop is attainable, I should budget accordingly. But what are your thoughts about bandsaws, jointers, planers, lathes, and the like? Are some types of shop equipment less vulnerable to the risks of buying used?

• Used tools are this woodworker's best friend

Question 4:

From Frank:
I am making several MDF plinths for an upcoming exhibit. They are 16" square. I mitered the edges so the only visible end gain is at the top. I'm looking for painting suggestions. Some videos say to use Zinsser BIN, and others say to just use regular drywall type primer, then lightly sand before applying primary color. Do you have any suggestions that would steer me in the proper direction?

• MDF edge, end grain prep, Edgetech

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Question 1: 

From Chase:

I have an old 13" hitachi planer I got from craigslist many years ago.  It has served me well but is starting to have issues. 13 inches has been useful, but at times I wish it was wider.  In your experience is it worth the extra money to buy something bigger, or should I stick with a more reasonable choice like DW735?  I have 220v access and floor space, so that isn't an issue. I am in my 30s, have been woodworking for ~10 years. I would like to keep woodworking into my 80s, so I can justify a longer term investment.  I can afford a 1.5 or 2k tool, but could buy something else if I stuck with a cheaper planer.  

• Segemented Cutterheads Change the Game 

 Question 2:

From Martin:

I know Mike likes to have a small offset between the rails and stiles of his frame-and-panel doors. But how does he then avoid chipping the unsupported inside corners of the stiles when planing the top and bottom of the door to fit the opening?

• How to Fit an Inset Door - Systematic approach yields perfect results every time 

• Install Inset Doors With Ease - Four-step process uses the jointer and tablesaw to guarantee a perfect fit

Segment: All Time Favorite Tool of All Time

Barry: SketchUp

• How To Create New SketchUp Textures For Your Models 

Mike: Suizan Japanese Saws and DFM Dowel Plate

• Japanese Sew Overview with Andrea Hunter

Ben: Shopmade Hot Pipe Bender

• Video: Hot Pipe Bender

Question 3:

From RobGoSlow on YouTube:

I'm not sure where to submit questions for the podcast but I have one: I'm a very new wood worker with a lower end contractor table saw. Obviously things like the blade angle and fence are not very precise but I want to know what sources of error are there to look out for? What are the types of error you're concerned about with a cheap table saw? 

• Portable Saws

Question 4:

From Capt. Zachary J. Daniels:

I want to buy a block plane from Lie-Nielsen.  I know Mike is a fan of the adjustable mouth block plane.  However, I also remember Mike and Matt Kenney having a spirited debate where Matt was extolling the virtues of the rabbeting block plane. I can't seem to find the original discussion between Matt and Mike.  Instead of listening to the entire catalog again, (and without Matt around to defend himself) I'm interested to hear Mike's opinion on why he prefers the adjustable mouth block plane over the rabbeting block plane.

Right now, I only want to buy one block plane as I also have my eye on the No. 62 low angle jack.    

Thanks for the show and keep up the great work!  I became an unlimited member after listening to several of the podcasts, so keep the content coming and inspiring others! 

• Rabbet Planes Are Real Shop Workhorses
• The Best Way to Fit Tenons

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

For more than 25 years GreenWood has worked with artisans in Honduras and the Peruvian Amazon to produce high-quality wood products from well-managed forests. They train woodworkers to use appropriate tools and technologies, and connect their products to good markets.

The GreenWood Carver's Mallets are available at LeeValley.com.

Support GreenWood's efforts by heading over to their GoFundMe page.

Rollie Johnson and Justin Fink join Tom, Barry, and Ben to discuss new tools being shown at the AWFS fair in Las Vegas

Vic and Ben welcome a new co-host into the mix and discuss resawing, adjusting the mouth of hand planes, easy-to-build knock-down benches, and how one Dr. can stop overusing their table saw.

For more information about our eLearning courses - http://www.finewoodworking.com/elearning

 For more information about our Woodworking Fundamentals journey - http://www.finewoodworking.com/fundamentals

Join us on our new Discord server! - https://discord.gg/8hyuwqu4JH

Links from this episode can be found here - http://www.shoptalklive.com

Sign up for the Fine Woodworking weekly eLetter - https://www.finewoodworking.com/newsletter

Sign up for a Fine Woodworking Unlimited membership - https://www.finewoodworking.com/unlimited

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@finewoodworking.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Danish Modern Desk with Tim Rousseau

Question 1: 

From Devin:
Over the years of listening to your show, reading Fine Woodworking, and watching instructional videos, I've heard a million different suggestions for how long to let a glue-up sit before you take the clamps off. Ranging from "a little while" -whatever that is?- to overnight, and everything in between. Do you guys have any good rules of thumb for drying time?

• Strategies for Squeeze-out
• How to Tame Tricky Glue-Ups
• How to Apply Wiping Varnish

Question 2:

From the Fine Woodworking forum by forum member NewAndGreen:
I'd like to apply a water based topcoat to two white oak chairs I've sanded. I was interested in using General Finishes water-based topcoat, but don't know if I should go with the flat or the satin finish. I have read that GF's satin is shinier than most. Is that true?  (I put a coat of Minwax Satin Polycrylic on one and liked the look, but I'm looking for a better product .) I know I don't want to start mixing. (I've already over-complicated the process!) I also know I don't want a glossy look and not a totally matte look. Ugh. Pictures of two parts of chair attached for reference. Thanks in advance for your advice/thoughts to this new and green refinisher!

Question 3:

Also from Paul:
I  have not heard Rubio Monocoat or Osmo mentioned on the podcast. Have any of you tried Monocoat? Being in the industry professionally myself, and, seeing what other pros are using, Monocoat and Osmo seem to be the two go-to products that many professionals use as their primary oil finish (they're like the BMW and Mercedes of woodworking it seems). Any experience and/or recommendations there?

• Osmo oil: durable, easy to use, and non-toxic
• Tips and Tricks For Getting A Sheen From an Oil Finish

Price of Osmo Polyx Oil at time of broadcast: .75-Liter=$58.56

Segment: All-Time Favorite Technique of All Time

Mike: Tom McLaughlin's "cut some off and glue it on the other side" technique

Anissa: Steve Latta's hinged flips stop

• 3 Handy Stop Blocks
  

Ben: Using metal files to shape difficult woods

• File Joints for a Perfect Fit

Question 4:

From Brendan:
I can't draw by hand at all.  Not even a little. My 3rd grade drawings look every bit as good as my current attempts. On STL180, you talked about design for about 30 minutes without mentioning cad as a design medium.   I know it's a scary topic but as a resolution at least one of you should try to design a furniture piece down to the jointery on your computer. The learning curve can be steep but I find that designing on the computer allows me to virtually build the piece without creating any sawdust.

And from Paul:
I don't know that I've ever heard Fusion 360 mentioned on the podcast. I used Sketchup for several years and loved it… however, a few years ago a landed a very complicated project (with cnc work involved), and came to the realization I needed something more sophisticated. Fusion 360 is now such a huge part of my business and can't imagine ever going back to Sketchup. Having parametric capabilities now seems absolutely necessary. Have any of you ever tried it?

• Design - Click - Build

 Recommendations: 

Anissa - Ted Talk - Rives: The Museum of Four in the Morning
Ben - The Woodworkers Podcast and luthiery podcast Omo

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Start Woodworking Season 1 by Matt Berger, Asa Christiana

https://www.finewoodworking.com/videoworkshop/2019/07/start-woodworking-season-1

Question 1:  From Dan: I recently built a pair of desks featured in issue #270. I built them mostly the way Michael Robbins did, however instead of using a domino to construct the top I used pocket screws. I don't own a domino, I opted for a hollow chisel mortiser, and  I thought it would be silly to use a hollow chisel mortise. How do you feel about pocket screws versus slip tenons made with a domino? Both tools make joining pieces of wood much simpler. One uses screws, the other uses wood and glue. One is under $100, and the other is over $1000. They are both faster and easier than traditional joinery. Am I wrong to think if I am not going to use traditional joinery pocket screws and domino slip tenons are interchangeable? I love my hollow-chisel mortiser, and if I'm gonna cheat on it, I'll just use screws. 

Question 2: From Chase: I was trying to edge-joint two 10-ft. long boards to make a wide shelf for our closet using a #7 handplane.  Typically, I clamp the boards together and plane the common glue edge until I get an even shaving across both.  I think that the length of the two boards meant there was some variation that the #7 didn't get. I can't imagine trying to joint these on a jointer, even if I had one.  How would you go about making this glue up work?  

Segment: All-time favorite tool of all time… for this week Mike: An Exacto knife with a brand new blade Asa: Cordless Trim Routers Ben: James Mursell Travisher (@windsorworkshop)

Question 3: From Chad, I was just listening to episode 190, and a listener asked about which big tool to buy next, a combo planer/jointer or a band saw. I've heard similar questions on the show before. I'm curious as to why you never mention the idea of investing in a makerspace, shared shop, or tool library?  There are a lot of great examples of makerspaces that give access to fully stocked wood and metal shops for a reasonable membership fee as well as not-for-profit tool libraries that are usually state funded just like normal libraries that allow for the borrowing of tools like books! For someone who's just getting started in woodworking getting access to a full woodshop for a membership fee that wouldn't be enough to buy a single quality power tool might be worth considering!  Maker Spaces:

• https://www.vocademy.com/
• http://www.tinkermill.org/
• https://www.thefoundrybuffalo.org/

Tool Libraries:

• https://www.neptl.org/
• http://www.thetoollibrary.org/

Question 4: From David: I am planning to build some outdoor chairs out of mahogany, and was wondering what finish to apply. I would like something that I don't have to touch up every year.   Or, should leave them unfinished. How does mahogany age in the weather?

 Recommendations: 

Ben - YouTube Channel: arboristBlairGlenn
Mike -  Asa's book - Handmade: A Hands On Guide
Asa -  www.instructables.com

Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking's biweekly podcast. Send your woodworking questions to shoptalk@taunton.com for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.

Dovetailing episodes from Chris Gochnour's Enfiled Cupboard Video Workshop:

Video: Chris Becksvoort–The Dovetail Master

Question 1:
From Jerrud: I'm making a dresser that is 72" long, 18" deep and 24" high not including legs. For a dresser this size–or any deep piece that is dovetailed–is seasonal wood movement a concern? Plain sawn lumber is cheaper than rift or quartersawn.

Question 2:
From Christian: I'm lucky enough to be expecting my first child, a baby boy, and I've always liked the idea of giving him a Lie Nielsen No 1 as a christening present. Recently, someone has suggested it a novelty tool and will be useless to him when he grows up. What alternative premium tools would you suggest as a christening gift?

Question 3:
From Mike: I'm building up my skills slowly by adding one new skill to each project I take on where I can.  I want to try my hand at dovetails one of these days as that new skill. I have two questions:

1. There are a ton of ways I see people doing them. Is there a method you recommend people start with? You recommend people learn to sharpen by picking one method, and sticking with it until you're good at it. Would the same apply to dovetail methods, or should you try a bunch of ways and then go with what you find out you like doing?
2. Should I start with practice joints on scrap wood or incorporate them when I'm actually making a project so there's more at stake and I have to take it more seriously?

By Christian Becksvoort #250–Nov/Dec 2015 Issue

The craftsman's calling card

By Christian Becksvoort #238–Jan/Feb 2014 Issue

For the first time, a modern master reveals every step of his system

By Christian Becksvoort #239–Mar/Apr 2014 Issue

Scribe the tails accurately and the rest is simple handwork

By Christian Becksvoort #171–July/Aug 2004 Issue

A tip from a tails-first guy

By Christian Becksvoort #171–July/Aug 2004 Issue

Five ways to increase accuracy and reduce the time it takes to execute this hand-cut joint

Segment: All-Time Favorite Technique

• Barry: Using blue tape as a shim
• Ben: When you're done cutting an odd angle, cut it one more time on a piece of scrap so you can recall the angle
• Mike: Full-size mockups

Question 4:
From Yves: I have just made my first checkerboard (walnut and maple) inlay strip which is intended for a cherry end table top. When sanding, the strip cracked along its length and I discovered that I had done a poor job of the clamping. The cracked section, which is about  4-5 inches long on one side of the checkerboard strip appears to have "lifted" during clamping and there is now an air space under the crack. Any suggestions that might help to save this? I thought perhaps trying to inject some glue under the crack to fill in the space using a needle???

Question 5:  
From David: I've recently had the opportunity to revamp my shop and am planning to build a Matt Kenney's monster workbench. I've bought the plans, and watched the videos, but I don't see how the top is fastened to the stand? Is there something I'm missing? Is it supposed to just sit on top?

Question 6:
From Dave: I love books but dislike most book covers - they're generally too visually noisy! I feel like my living space is full of loud colorful ad copy, or like I'm in a chain bookstore. Do you have any recommendations for ways to keep books in the home that would allow you to conceal the visual clutter? Really, I'm just asking for permission to make a bookcase hidden-door that spins around.

Doors are dominant on most cabinet designs, so dressing up door panels is an easy way to make furniture stand out.

Recommendations:

Barry - Get a camelback for hiking

Ben - Yeti 18-oz. Rambler Bottle with  MagDock Cap

Mike - DFM A2 Steel Dowel Plate by DFM Tool Works