We Built A Thing is about making things with our hands, sharing videos about the process, being dads and constantly learning.
We are all part-time makers, dads and all have YouTube channels we are trying to grow.
Throughout this podcast, we plan to talk about making things, making videos to share on YouTube, Instagram, Facebook, etc..
Site
RSS
Classements récents
Dernières positions dans les classements Apple Podcasts et Spotify.
Liens partagés entre épisodes et podcasts
Liens présents dans les descriptions d'épisodes et autres podcasts les utilisant également.
In this conversation, Bruce and Mark talk about being right eye dominant or left eye dominant. Also, epoxy countertops go oh so wrong. Bruce loves Arm-R-Seal for figured woods. Plus, a ton more!
We are makers, full-time dads and have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.
328 - When the Gipsy Comes to Play It's Usually Wet
Épisode 328
mercredi 29 octobre 2025 • Durée 58:10
In this conversation, Bruce and Mark talk about pouring epoxy countertops, cutting a hole for a drop-in sink, rabbeting a picture frame. Plus, a ton more!
OUR TOP PATREON SUPPORTERS -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Bruce Clark -Will White -Andy @ Mud Turtle Woodworks -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Chad Green -Trevor -Mark Herrick @ Empty Nest Woodworks
New: Steve Jason Bailey
Support our sponsors:
319 - The Wives of WBAT: Renovation Harder
Épisode 319
mercredi 27 août 2025 • Durée 58:46
We are back again this week with our wives, Rebecca and Katie, talking all things renovation and building. The title was an attempt at making a sequel movie title like you used to see in the 90's. Hope you enjoy this chat with all of us, detailing Mark's renovation in the kitchen and living room and Bruce's house build process thus far.
OUR TOP PATREON SUPPORTERS -Tim Morrill -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv -Ray Jolliff -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Chris Simonton -Maddux Woodworks http://bit.ly/3chHe2p -Bruce Clark -Will White -Cody Elkins (creator of the Jenny Bit) -Andy @ Mud Turtle Woodworks -Monkey Business Woodworks -Rich from Woodnote Studio -AC Nailed It -Joe Santos from Designer's Touch Kitchen & Bath Studio -Chad Green Support our sponsors:
229 - I Think You Shorted Me
Épisode 229
mercredi 6 décembre 2023 • Durée 01:03:05
In this episode, Mark gets shorted on lumber. Bruce gets a ton of material delivered to his land for a pretty serious tractor shed. Drew is making some Christmas lanterns & making a sign out of a slab. Plus a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Camp27 -Bruce Clark -Matt @ Wackey Worx -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks New: -Tree Carcass Tweaking Support our sponsors:
228 - Bananas In A Good Way
Épisode 228
mercredi 29 novembre 2023 • Durée 01:02:38
In this episode, Mark has to visit a lumber provider, the horror. Bruce trips a SawStop brake. Drew puts up Christmas lights. Plus a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Camp27 -Bruce Clark -Matt @ Wackey Worx -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks Support our sponsors:
227 - 2500 Strips
Épisode 227
mercredi 22 novembre 2023 • Durée 59:41
In this episode, Mark is still in Kentucky...and gets to record with Bruce in person. Bruce puts out a new video about some floating shelves for shoes in the closet renovation series. Drew published his night stand video. Watch it here: https://youtu.be/p4G0HPB2syY?si=e-A7-kQa0suFAFuD Plus a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
(we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Camp27 -Bruce Clark -Matt @ Wackey Worx Support our sponsors:
226 - Zzzzzink Dead
Épisode 226
mercredi 15 novembre 2023 • Durée 58:50
In this episode, Mark visits Kentucky. Bruce leaves Kentucky. Drew needs to change his logo. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Camp27 -Bruce Clark -Matt @ Wackey Worx -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks
Support our sponsors:
225 - Endoscopy
Épisode 225
mercredi 8 novembre 2023 • Durée 57:30
In this episode, Mark has some expensive vet bills. Bruce makes some modern adirondak chairs. Drew messed up some walnut on his nightstand builds. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Camp27 -Bruce Clark -Matt @ Wackey Worx -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks
New: -Ron Sager Support our sponsors:
224 - Mark Doesn't Prance
Épisode 224
mercredi 1 novembre 2023 • Durée 01:02:15
In this episode, Mark rips out some skylights. Bruce makes an unnecessary walnut island top. Drew bakes some wood in the oven. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
OUR TOP PATREON SUPPORTERS: -Tom's Woodwork -Tim Morrill -Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv -Brent Jarvis: https://bit.ly/2OJL7EV -Chris Simonton -Maddux Woodworks YT: http://bit.ly/3chHe2p -Byrom's Custom Woodworks -Ray Jolliff -Ryder Clark -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/ -Henry Lootens (@Manfaritawood) -Kris -Ben Wilker with Wilker's Woodcraft -Camp27 -Bruce Clark -Matt @ Wackey Worx -Brad Hoff -Tommy Trease -Will White -Cody Elkins (maker of the Jenny bit)
New: -Kevin Griffin ($2) Support our sponsors:
223 - You're Pretty Basic
Épisode 223
mercredi 25 octobre 2023 • Durée 01:01:49
In this episode, Mark goes hunting with his son and works some more on the concealment cabinet. Bruce does another craft show...find out the results. Drew passes on a laser and dreams up some more projects. Plus, a ton more!
This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
We are makers, full-time dads and have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.
We are makers, full-time dads and have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
-Brad Hoff
-Tommy Trease
-Will White -Cody Elkins (maker of the Jenny bit) -Monkey Business Woodworks
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathing WE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
Podcasts Similaires Basées sur le Contenu
Découvrez des podcasts liées à We Built A Thing. Explorez des podcasts avec des thèmes, sujets, et formats similaires. Ces similarités sont calculées grâce à des données tangibles, pas d'extrapolations !
