What actually makes a Cummins stroker, and why does “6.4” mean two completely different engines? Todd, Will, and Myer break down how stroker engines are built, what they gain you, and how to do one on your own truck. If you’ve ever wondered what a 6.1 or 6.4 Cummins really is, this episode clears it up.
Dropping a 6.7 crank into a 5.9 gets you a 6.1, and a 40 over 5.9 with that same crank gets you a 6.2. The 6.4 is where people get confused. One version is the old short stroke combo with a 5.9 crank in a 6.7 block. The other, and now the more common, is a sleeved down 6.7 that keeps the full 6.7 stroke, like Myer’s engine, which adds cylinder wall thickness for strength.
For the 12 valve guys, they walk through a 12v Cummins build step by step. The 6.7 crank bolts right in because rod length, main journals, and deck height all match, but you’ll need to swap the straight cut crank gear. Decking about 80 thousandths off the pistons bumps compression a point or more. That means better spool, more torque, and better fuel economy, as long as you stay under what the block can handle.
Common rail owners aren’t left out. They cover why bowl and injector placement matter on a 5.9 common rail, the 80 thousandths shorter Wagler rods made for this exact swap, and why higher piston protrusion helps a 6.7 tow build. They also talk about how injector washer thickness on a 12 valve changes nozzle depth in the bowl, a trick that used to be worth around 25 horsepower on the dyno.
Before getting into engines, the guys tackle a viewer comment from Rusty Water 3219 about Gale Banks saying black diesel smoke is unburned fuel that melts pistons. They explain why that’s fair for a loaded street truck pulling a grade, but misleading when you’re chasing peak power. In recent turbo testing on a small single, the truck made around 680 horsepower tuned nearly clean. Adding fuel until it ran dark gray at roughly .86 lambda pushed it to about 850 on the same turbo.
They also compare diesel tuning to high end gas engines, which make peak power in a surprisingly similar lambda range. So when someone says diesel guys don’t know how to tune, the smoke is really just how a diesel burns fuel when air is the limit. If you want it clean and mean, that’s where nitrous comes in. And for the record, unburned fuel isn’t black. Black smoke is partially burned fuel, kind of like burnt toast.
If you’re into Cummins builds and real diesel tuning talk, subscribe on YouTube and follow the Power Driven Podcast wherever you listen. Let us know if you want more engine episodes.
If you’re planning a stroker build of your own, Power Driven has the 6.7 cranks with the helical gear already on them, plus the blocks, rods, and parts the guys talk about in this episode. Shop everything mentioned at PowerDriven.com, links below.
Shop Power Driven Diesel: https://www.powerdriven.com
⚙️Power Driven True 6.7 Cummins Crankshaft: https://powerdriven.com/products/power-driven-true-6-7-cummins-crankshaft
🚚New 6.7L Cummins OEM Engine Block: https://powerdriven.com/products/new-6-7l-cummins-oem-engine-block-07-5-18
🛠️Street Fighter Connecting Rods 0.080" Shorter (6.1L Stroker Kits): https://powerdriven.com/products/street-fighter-connecting-rods-0-080-shorter-for-6-1l-stroker-kits
🔧Wagler Street Fighter Connecting Rods: https://powerdriven.com/products/wagler-crd5-9-6-7st-street-fighter-connecting-rods-for-89-18-cummins-5-9-6-7l-up-to-1500-hp
🔥Power Driven 12v Cummins Injector Shim Kit: https://powerdriven.com/products/power-driven-12v-cummins-injector-shim-kit