Unlock the full potential of your smoker while maintaining that rich, authentic smoke flavor with our comprehensive guide on balancing smoker efficiency. In this video, we'll dive into the critical considerations of smoker design and the trade-offs that come with pushing efficiency to its limits. We explore how to achieve optimal temperatures across the cooking chamber without sacrificing the deep, smoky flavor that your BBQ deserves.

Learn how over-emphasizing efficiency can lead to a loss of flavor and poor yield, and discover the sweet spot where performance and taste coexist. We discuss the importance of managing your fire to maintain a consistent heat with the right smoke output, revealing why some expert pitmasters favor a slightly "sloppy" fire to achieve that perfect blue smoke.

Gain insights about the ideal firebox size, airflow management, and coal bed maintenance to preserve the authentic BBQ experience. Whether you're cooking for a restaurant or a large gathering, we emphasize the crucial balance between having enough cooking capacity and not over-engineering your pit.

Avoid common pitfalls that come with over-optimizing your smoker. This video is packed with practical tips and real-world examples to ensure you achieve the best flavor, texture, and yield from your smoker without compromising on the rich, smoky taste. Don't miss out on transforming your BBQ results with our expert advice.

Join our community for more expert tips at smokerbuilderu.com and smokerplans.net.
For in-depth courses and a supportive community, visit smokerbuilderu.com.

Keep your smoke thin and blue, and happy BBQ!

🔔 Don’t forget to like, subscribe, and hit the bell for more smoker-building advice and BBQ tips.

If you would like some help with your build or even the opportunity to take some smoker building classes go check out SmokerBuilderU.com
That's our private online community where you can join for free and post about your builds and questions! We also have several online courses you can take that show everything from design to building smokers!

Welcome to SmokerBuilder! I'm Frank Cox, The BBQ Pit Engineer. With over 14 years of experience designing and building smokers for DIY enthusiasts, backyard barbecuers, and professional pitmasters around the globe, I’m here to share my insights on insulating fireboxes.

In this video, I dive into whether insulating your firebox on an offset or reverse flow smoker is truly beneficial. Discover the impact of insulation on fire efficiency, flavor quality, and cooking style. Learn the trade-offs between conserving heat and maintaining the perfect smoke for Texas-style barbecue.

From understanding the importance of a "dirty" fire for that coveted thin blue smoke to maximizing flavor through smoke rings, I cover it all. Plus, I provide practical tips on managing your fire without insulation and share alternative solutions like using holding cabinets for extended cooking times.

Join our community for more expert tips at smokerbuilderu.com and smokerplans.net. For in-depth courses and a supportive community, visit smokerbuilderu.com.

Keep your smoke thin and blue, and happy BBQ!

🔔 Don’t forget to like, subscribe, and hit the bell for more smoker-building advice and BBQ tips.

If you would like some help with your build or even the opportunity to take some smoker building classes go check out SmokerBuilderU.com
That's our private online community where you can join for free and post about your builds and questions! We also have several online courses you can take that show everything from design to building smokers!


#offsetsmoker #bbq #grill

Radiant Heat vs.Convective Heat for Smokers & Grills: The Ultimate Guide

🔥 Master the Art of BBQ with This In-Depth Guide! 🔥

Ever wondered why some smokers and grills cook differently? It all comes down to the science of heat transfer! In this video, we dive deep into the world of Radiant Heat vs.Convective Heat and how each impacts your cooking experience.

🔥 You'll Discover:

* The fundamental differences between radiant and convective heat
* How each heat type affects smoker and grill design
* My personal "ah-ha" moment on utilizing both heat types for optimal results
* Bonus: Learn about my involvement with the NEW  @MadScientistBBQ   Solution Offset Smoker!

🔥Resources:

* Smoker Plans: https://smokerplans.net/
* SmokerBuilder University: https://smokerbuilderu.com/
* About SmokerBuilder: https://smokerbuilder.com/

🔥Join the Community:
* Smoker Builder University: https://smokerbuilderu.com/

🔥Share the Knowledge:

Please share this video with your friends and BBQ communities to help others master the art of smoking and grilling!

🔥 Don't Miss Out:

Subscribe and hit the notification bell to stay updated on all our latest BBQ tips and tricks!

🔥 Let's Build Your Dream Smoker!

Need help deciding which smoker to build?
Visit SmokerBuilder.com and let me guide you through the process!

🔥 BBQ Keywords:

#offsetsmoker #bbq #grilling #smoking #radiantheat #convectiveheat #bbqtips #howtobbq #diy bbq #smokerplans #bbqcommunity #grillinglife #outdoorcooking #barbecue

In this episode of the SmokerBuilder Podcast I explain how to determine the location of your air inlet for your fire box and why it is important.
If you’re interested in getting your new or next smoker go to https://SmokerBuilder.com 
On that page answer a simple question by choosing from the 3 options and I’ll help you get your smoker faster and easier than you ever imagined!
I can help you by building it for you or show you how to build it yourself!

You can also join our private online community for free at:
https://smokerbuilderu.com

In this episode, we’re gonna talk about the ergonomics or best practices of smoker building design, allowing for easy use by Pitmasters. 
Making sure the doors are easy to open and the pit is overall easy to use.

By the way check out the brand new smokerbuilder.com website!
Completely re-designed making it easier to get help with your new smoker!

https://smokerbuilder.com

You can also join our private online community for free and join in the conversation between all of us SmokerBuilder’s at https://smokerbuilderu.com

On this episode of The SmokerBuilder Podcast, I got this question in The Chat on Smokerplans.net from Darry.
The question about my meat is black is not talking about the bark on your brisket, but rather the black sooty wet film that happens sometimes.
listen in to this 20 minute long episode and let me know what your thoughts are!

Please give this podcast a review!
Join our new Private online community at SmokerBuilderU.com for FREE!
Also, you can grab some FREE smoker Plans at SmokerPlans.net!

#firemanagement #offsetsmoker #smokedmeat

If you're planning to build a smoker trailer this episode is for you!
In this episode we'll talk about important trailer parts and terminology you'll need to know as well as cover some do's and don'ts!

Please give this podcast a review!
Join our new Private online community at SmokerBuilderU.com for FREE!
Also, you can grab some FREE smoker Plans at SmokerPlans.net!

In this episode of the SmokerBuilder Podcast I'm covering the topic of moving heaviy things. This might sound simple, but most of the accidents that happen to SmokerBuilder's in their shop can be avoided with the right information and the proper tools for the job.
I'll cover the best tools for different applications as well as some important processes to follow.

Please give this podcast a review!
Join our new Private online community at SmokerBuilderU.com for FREE!
Also, you can grab some FREE smoker Plans at SmokerPlans.net!

In this episode of the SmokerBuilder Podcast we are talking about how to determine the correct placement of your smoker when mounting it to your trailer.
We'll cover axles, axle placement, tongue weight, and other things to consider.

PLease give this podcast a review!
Join our new Private online community at SmokerBuilderU.com for FREE!
Also, you can grab some FREE smoker Plans at SmokerPlans.net!

In this video I'll show you some things to keep in mind when sourcing the steel for your build!
Specifically things like tubing, pipe, and other materials.  

By the way, we just published the plans for this build on smokerplans.net 
You will find them here: 
https://smokerplans.net/products/1000-gallon-offset-smoker-with-scoop-baffle-round-firebox-right-side

If you would like some help with your build or even the opportunity to take some smoker building classes go check out SmokerBuilderU.com
That's our private online community where you can join for free and post about your builds and questions! We also have several online courses you can take that show everything from design to building smokers!

For more content like this please join our private online community on https://smokerbuilderu.com

If you find this video helpful, please share it with your friends and other groups your active in so others can benefit also.

Thanks for watching and subscribe / hit the bell so you don't miss a thing!

If you're ready for that new smoker but need help deciding what to build please visit https://smokerbuilder.com and I'll help you decide!


#smokerbuilder #bbqsmoker #diysmoker

If you've ever asked questions about insulating the fire box on an offset smoker this episode of the SmokerBuilder Podcast is for you!
We'll look at it from both sides of the issue and then I will tell you my preference!

Join our new Private online community at SmokerBuilderU.com for FREE!

Also, you can grab some FREE smoker Plans at SmokerPlans.net!

On today's episode of the SmokerBuilder Podcast we're going to talk about how thick of material is really necessary for your offset smoker.

Join our new Private online community at SmokerBuilderU.com for FREE!

Also, you can grab some FREE smoker Plans at SmokerPlans.net!

A funny thing happened today, and now I'm gonna come clean and fix a couple things.
While I'm at it, I'll change the name of the podcast to what it should actually be!

Join our new Private online community at SmokerBuilderU.com for FREE!

Also, you can grab some FREE smoker Plans at SmokerPlans.net!

This episode is an excerpt from one of our Happy Hour Live podcasts where my bro Chris from @greenmoneyfab joins me to discus warped doors and other pitfalls!

Grab your notebook and get ready!

----------------------------------------------------------
Also, we just launched our Patreon site where you can get in touch with me directly to ask questions and learn more at a faster pace!
As a member you'll also get access to these kinds of videos as we are in the editing process and during the filming process!
There's too many benefits for our members to list here, so please click the link below to learn more about it!

https://www.patreon.com/smokerbuilder

More Information and Helpful Things:
By the way, if you would like some plans or designs to build your own smoker, I have a few options for you!

here's some options:

1- Grab a FREE Set of Reverse Flow Smoker Plans for a 24 diameter by 48 inch long cooking chamber! Just pay the $12.95 S&H and I will send them right to your door!

Click here to grab your FREE Copy!
https://sbmfg.net/free-rf-smoker-plan

2- Grab your FREE Copy of these 250 Gallon Offset Smoker Plans for a propane tank! Same thing here, just pay the $12.95 S&H and I will send them right to your door!

Click here to grab your FREE Copy!
https://www.smokerplans.com/sb-legacy-250-offset-opt-in

3- If you would like a bigger or a smaller smoker then visit our website to scroll through over 200 other smoker plans and designs that will show you everything you need to know to build your own dream smoker!

Click Here to visit our website!
https://smokerplans.net

4- If you need help learning how to weld or would like someone to teach you how to improve your skill then check out our In Person Welding Classes!
They are scheduled several times per year and are held at our shop in Rolla, MO.

Click here to learn more!
https://smokerplans.net/products/smokerbuilder-welding-class-in-person

Like I said, please like this video and subscribe to this channel so you don't miss a thing!

#offsetsmoker #propanetank #builtnotbought

This video is an excerpt from one of our Happy Hour Live Streams where Bob Moffatt was my guest.

I asked him what his favorite type of abrasives are.

I'll tell ya, there is a lot of choices out there and I like to try new ones as often as I can. 
I think my preference is a good ol ¼ thick hard disk and a 60 grit flap disk.
Seems like I can get almost everything I need to do, done with those.
Comment and tell me your preference!
--------------------------------------------------------------------------------------
Also, we just launched our Patreon site where you can get in touch with me directly to ask questions and learn more at a faster pace!
As a member you'll also get access to these kinds of videos as we are in the editing process and during the filming process!
There's too many benefits for our members to list here, so please click the link below to learn more about it!

https://www.patreon.com/smokerbuilder

More Information and Helpful Things:
By the way, if you would like some plans or designs to build your own smoker, I have a few options for you!

here's some options:

1- Grab a FREE Set of Reverse Flow Smoker Plans for a 24 diameter by 48 inch long cooking chamber! Just pay the $12.95 S&H and I will send them right to your door!

Click here to grab your FREE Copy!
https://sbmfg.net/free-rf-smoker-plan

2- Grab your FREE Copy of these 250 Gallon Offset Smoker Plans for a propane tank! Same thing here, just pay the $12.95 S&H and I will send them right to your door!

Click here to grab your FREE Copy!
https://www.smokerplans.com/sb-legacy-250-offset-opt-in

3- If you would like a bigger or a smaller smoker then visit our website to scroll through over 200 other smoker plans and designs that will show you everything you need to know to build your own dream smoker!

Click Here to visit our website!
https://smokerplans.net

4- If you need help learning how to weld or would like someone to teach you how to improve your skill then check out our In Person Welding Classes!
They are scheduled several times per year and are held at our shop in Rolla, MO.

Click here to learn more!
https://smokerplans.net/products/smokerbuilder-welding-class-in-person

Like I said, please like this video and subscribe to this channel so you don't miss a thing!

#offsetsmoker #propanetank #builtnotbought

If you are struggling to get your offset smoker hot enough or maintain your cooking temperature, this episode is for you!

If you have a question I didn't answer in this episode then please leave a comment so I can answer it!

Don't miss this episode!

If you are searching for an offset smoker you can depend on and get results fast, check out my new offset smokers at LegendSmokers.com! In stock and ready to ship right now!

If you would like to see some sets of plans that show you how to build a smoker you can rely on, check out the link below:

Offset Smoker Plans smokerplans.net...

______________________________________________________________

For more information on how to build your smoker please visit the following links for tons of helpful information:

https://smokerbuilder.com/

https://linktr.ee/smokerbuilder

#smokerbuilder #offsetsmoker #reverseflowsmoker

You're listening to the SmokerBuilder Happy Hour Podcast!

For a free set of plans go here:
https://bit.ly/smokerbuildermfg-free-rf4800-plans

For Revers Flow Smoker Plans:
https://bit.ly/smokerbuildermfg-free-rf4800-plans

For Offset Smoker Plans:
https://sbmfg.net/Offset-Smoker-Plans

SmokerBuilder was founded in 2010 with the vision to help people build smokers and teach them how to use them. Since then we have helped thousands of people build their first smoker.

Now it's your turn! We want to give you a FREE set of our SmokerPlans! Our plans have been selling for $79.00 and up for over 10 years now and we want to make sure you get your opportunity to claim your free set before they are gone!

Claim you FREE set of our smoker plans at www.SmokerPlans.com

YOU can be a #SmokerBuilder!

PitMaster Secrets Is Now SmokerBuilder Happy Hour!
My guest is Ryan Newland from Backline Fab of Austin, Texas!
We discuss the smoker building business and a lot of other topics!

If you have a special topic or person you would like us to interview, email us at admin@smokerplans.net to let us know!

-------------------------------------------------------------

You're listening to the SmokerBuilder Happy Hour Podcast!

For a free set of plans go here:
https://bit.ly/smokerbuildermfg-free-rf4800-plans

For Revers Flow Smoker Plans:
https://bit.ly/smokerbuildermfg-free-rf4800-plans

For Offset Smoker Plans:
https://sbmfg.net/Offset-Smoker-Plans

SmokerBuilder was founded in 2010 with the vision to help people build smokers and teach them how to use them. Since then we have helped thousands of people build their first smoker.

Now it's your turn! We want to give you a FREE set of our SmokerPlans! Our plans have been selling for $79.00 and up for over 10 years now and we want to make sure you get your opportunity to claim your free set before they are gone!

Claim you FREE set of our smoker plans at www.SmokerPlans.com

YOU can be a #SmokerBuilder!

In this episode of the PitMaster Secrets Podcast I answer a question I was recently asked about the kind of baffle plates I use for my offset smoker.

If you have a question I didn't answer in this episode then please leave a comment so I can answer it!

Don't miss this episode!

If you would like to see some sets of plans that show these kinds of baffle plates, check out the link below:

Offset Smoker Plans with pictures on smokerplans.net...
https://sbmfg.net/new-offset-smokerplans

This podcast episode was taken from a Live Q&A Zoom call we did a while back.
Since then, we have established a new home for Lives!

The NEW place for live Q&A's is SmokerBuilderU!  It's a mix of the old school forum and the Facebook group.  No need to sign up for events!!  Just ask to join!
https://smokerbuilderu.com/share/AuUgkjqPvOrVpo58

______________________________________________________________

For more information on how to build your smoker please visit the following link for tons of helpful information:

https://linktr.ee/smokerbuilder

#smokerbuilder #offsetsmoker #reverseflowsmoker #udssmoker

In this episode of the PitMaster Secrets Podcast I answer a question I was recently asked about the kind of paint I use and where I get it from.

If you have a question I didn't answer in this episode then please leave a comment so I can answer it!

Don't miss this episode!

If you want to buy some of this paint check out the link below:

Krylon Implement Paint In Colors On Amazon...
https://amzn.to/3CHKfnV

This podcast episode was taken from a Live Q&A Zoom call we did a while back.

If you would like to join us on the next Live Q&A Zoom calls please click the link below to sign up...

https://sbmfg.net/smokerbuilder-live

Once you sign up I will shoot you the link to join the next call once it is scheduled!

______________________________________________________________

For more information on how to build your smoker please visit the following links for tons of helpful information:

https://smokerbuilder.com/

https://linktr.ee/smokerbuilder

#smokerbuilder #offsetsmoker #reverseflowsmoker #udssmoker

If you're trying to figure out what insulation to use in your smoker or where to buy insulation for a smoker build this episode is for you!

In this podcast episode I go into detail about what types of insulation work best and which types don't work at all!

I also discuss where I shop for the smoker insulation I use as well as where to get the other types.

Don't miss this episode!

If you want to buy some of this insulation check out the link below:
https://bbqsmokersupply.com/other/insulation.html?ac=Ju9lwqwuX0&referring_service=link

This podcast episode was taken from a Live Q&A Zoom call we did a while back.



______________________________________________________________

For more information on how to build your smoker please visit the following links for tons of helpful information:

https://smokerbuilder.com/

https://linktr.ee/smokerbuilder

#smokerbuilder #reverseflowsmoker #offsetsmoker

If you're trying to decide how to get your new smoker this video is for you!
In this podcast episode I discuss 3 primary ways to get your new smoker that will make your decision easier!

If you want to build your own smoker check out smokerplans.net and browse our selection of over 200 sets of smoker plans!
https://smokerplans.net/

You can also click this link to see some helpful links including some FREE smoker plans!
https://linktr.ee/smokerbuilder

#smokerbuilder #diy #offsetsmoker

You're listening to the PitMaster Secrets Podcast!

For a free set of plans go here:
https://bit.ly/smokerbuildermfg-free-rf4800-plans

For Revers Flow Smoker Plans:
https://bit.ly/smokerbuildermfg-free-rf4800-plans

For Offset Smoker Plans:
https://sbmfg.net/Offset-Smoker-Plans

SmokerBuilder was founded in 2010 with the vision to help people build smokers and teach them how to use them. Since then we have helped thousands of people build their first smoker.

Now it's your turn! We want to give you a FREE set of our SmokerPlans! Our plans have been selling for $79.00 and up for over 10 years now and we want to make sure you get your opportunity to claim your free set before they are gone!

Claim you FREE set of our smoker plans at www.SmokerPlans.com

YOU can be a #SmokerBuilder!

We Are Back!!!
I am so glad to be publishing the podcast again!
Gonna keep it light this time!
In this episode I tell you about a huge mistake I made and get you caught up with what all has changed since the last season.

_________________________________________________________________

You're listening to the PitMaster Secrets Podcast!

For a free set of plans go here:
https://bit.ly/smokerbuildermfg-free-rf4800-plans

For Revers Flow Smoker Plans:
https://bit.ly/smokerbuildermfg-free-rf4800-plans

For Offset Smoker Plans:
https://sbmfg.net/Offset-Smoker-Plans

SmokerBuilder was founded in 2010 with the vision to help people build smokers and teach them how to use them. Since then we have helped thousands of people build their first smoker.

Now it's your turn! We want to give you a FREE set of our SmokerPlans! Our plans have been selling for $79.00 and up for over 10 years now and we want to make sure you get your opportunity to claim your free set before they are gone!

Claim you FREE set of our smoker plans at www.SmokerPlans.com

YOU can be a #SmokerBuilder!

____________________________________________________________

P.S. Check out my Amazon List!
For a list of some of my favorite smoker building tools and hardware check out our Shop on Amazon by clicking here: https://amzn.to/3xd1D1s

( Yep, I do make a small commission if you buy these things but it doesn't cost you a dime.)

In this episode we talk about ways you can Build A stickburner Smoker without starting from scratch.

We'll cover things like:
-Welding Frustrations
-Where to start
-A Possible Solution

You're listening to the PitMaster Secrets Podcast!

For a free set of plans go here:
https://bit.ly/smokerbuildermfg-free-rf4800-plans

For Revers Flow Smoker Plans:
https://bit.ly/smokerbuildermfg-free-rf4800-plans

For Offset Smoker Plans:
https://sbmfg.net/Offset-Smoker-Plans

You're listening to the PitMaster Secrets Podcast!

Tom and I started SmokerBuilder in 2010 with the vision to help people build smokers and teach them how to use them. Since then we have helped thousands of people build their first smoker.

Now it's your turn! We want to give you a FREE set of our SmokerPlans! Our plans have been selling for $79.00 and up for over 10 years now and we want to make sure you get your opportunity to claim your free set before they are gone!

Claim you FREE set of our smoker plans at www.SmokerPlans.com

YOU can be a #SmokerBuilder!

If you want to build your own smoker the right way the first time but you don't want to weld check out our easy to assemble kits and parts to build your own UDS Drum Smoker!  Click Here to check out our selection!

If you've been in this BBQ world for any amount of time, you've probably heard guys talkin about wether they like cookin hot n fast or low n slow on their smoker. ANd maybe you're wondering what the heck does that even mean? Well, today we are gonna talk about just that!
We'll cover topics like:
-The Different Cook Results
-Different Smoker Types
-What's Best For Your BBQ needs
AND MORE!

For tips on Cooking Backyard ribs:
https://sbmfg.net/cook-on-uds-video

For deciding on which cooker is right for you:
https://sbmfg.net/uds-vs-stickburner

You're listening to the PitMaster Secrets Podcast!

Tom and I started SmokerBuilder in 2010 with the vision to help people build smokers and teach them how to use them. Since then we have helped thousands of people build their first smoker.

Now it's your turn! We want to give you a FREE set of our SmokerPlans! Our plans have been selling for $79.00 and up for over 10 years now and we want to make sure you get your opportunity to claim your free set before they are gone!

Claim you FREE set of our smoker plans at www.SmokerPlans.com

YOU can be a #SmokerBuilder!

If you want to build your own smoker the right way the first time but you don't want to weld check out our easy to assemble kits and parts to build your own UDS Drum Smoker!  Click Here to check out our selection!

While a box store pellet cooker is a great way to get started in BBQ, it's definitely holding you back from reaching your potential as a Pitmaster. In today's episode we talk about all the reasons you need an upgrade.

We'll cover topics like:
-Different Types of Live Fire
-Electronics Dependency
-Affordability
And MORE!

You're listening to the PitMaster Secrets Podcast!


Tom and I started SmokerBuilder in 2010 with the vision to help people build smokers and teach them how to use them. Since then we have helped thousands of people build their first smoker.

Now it's your turn! We want to give you a FREE set of our SmokerPlans! Our plans have been selling for $79.00 and up for over 10 years now and we want to make sure you get your opportunity to claim your free set before they are gone!

Claim you FREE set of our smoker plans at www.SmokerPlans.com

YOU can be a #SmokerBuilder!

If you want to build your own smoker the right way the first time but you don't want to weld check out our easy to assemble kits and parts to build your own UDS Drum Smoker!  Click Here to check out our selection!

Have you wondered the differences between drum smokers and Stickburners? Well on today's episode we go in depth on what to expect from each kind of Smoker.

We'll cover topics like:
-Coal vs. Wood Fired
-Cost of Building Both
-Type of Cooks
AND MORE!

You're listening to the PitMaster Secrets Podcast!

Tom and I started SmokerBuilder in 2010 with the vision to help people build smokers and teach them how to use them. Since then we have helped thousands of people build their first smoker.

Now it's your turn! We want to give you a FREE set of our SmokerPlans! Our plans have been selling for $79.00 and up for over 10 years now and we want to make sure you get your opportunity to claim your free set before they are gone!

Claim you FREE set of our smoker plans at www.SmokerPlans.com

YOU can be a #SmokerBuilder!

If you want to build your own smoker the right way the first time but you don't want to weld check out our easy to assemble kits and parts to build your own UDS Drum Smoker!  Click Here to check out our selection! Update Description

In this episode we answer the question Can You Grill On A Reverse Flow Smoker? The solution is easier than you think, but there are some things you must consider first!

We'll cover topics like:
-Reasons for Grilling On  Reverse Flow
-Cooker Design Considerations
-How To Cook If You're Grilling on a Stick Burner
AND MORE!

You're listening to the PitMaster Secrets Podcast!

Tom and I started SmokerBuilder in 2010 with the vision to help people build smokers and teach them how to use them. Since then we have helped thousands of people build their first smoker.

Now it's your turn! We want to give you a FREE set of our SmokerPlans! Our plans have been selling for $79.00 and up for over 10 years now and we want to make sure you get your opportunity to claim your free set before they are gone!

Claim you FREE set of our smoker plans at www.SmokerPlans.com

YOU can be a #SmokerBuilder!

If you want to build your own smoker the right way the first time but you don't want to weld check out our easy to assemble kits and parts to build your own UDS Drum Smoker!  Click Here to check out our selection! Update Description

In today's episode we answer a simple question: Can You Burn Wood in Your Drum Smoker? It may seem like an easy yes or no answer, but there are things you should consider before making a decision!

We'll cover topics like:
-Wood Flavor Smoker
-Methods of Burning Wood
-Other Types of Smokers Good for Wood Burning
AND MORE!

You're listening to the PitMaster Secrets PodCast!

Tom and I started SmokerBuilder in 2010 with the vision to help people build smokers and teach them how to use them. Since then we have helped thousands of people build their first smoker.

Now it's your turn! We want to give you a FREE set of our SmokerPlans! Our plans have been selling for $79.00 and up for over 10 years now and we want to make sure you get your opportunity to claim your free set before they are gone!

Claim you FREE set of our smoker plans at www.SmokerPlans.com

YOU can be a #SmokerBuilder!

If you want to build your own smoker the right way the first time but you don't want to weld check out our easy to assemble kits and parts to build your own UDS Drum Smoker!  Click Here to check out our selection! Update Description

So, you're ready to build your first smoker, but you don't know how to weld! Lucky for you, I've been in that exact same spot and i'd be glad to share some tips on how to get started!

In this episode we'll talk about:
-Types of Welders
-Types of Metal
-Best Welding Practice
AND MORE!

You're listening to the PitMaster Secrets Podcast!

So, your wanna build your very own smoker! BUT you don't have a shop to work in! Well, luck for you, I know what it's like to start this Smoker Journey with no funds and happy to share some tips with you on how to build your first pit without a SHOP!

Here are some things we'll cover in this episode:
-Tools You Need to Build
-Ways to Find a Place to Build
-Building Techniques
AND MORE!

Hopefully this episode will give some useful info on what step to take next on your SmokerBuilding Journey!

You're listening to the PitMaster Secrets Podcast!

Tom and I started SmokerBuilder in 2010 with the vision to help people build smokers and teach them how to use them. Since then we have helped thousands of people build their first smoker.

Now it's your turn!
We want to give you a FREE set of our SmokerPlans! Our plans have been selling for $79.00 and up for over 10 years now and we want to make sure you get your opportunity to claim your free set before they are gone!

Here's a list of helpful links you might find useful...
https://linktr.ee/smokerbuilder

Claim you FREE set of our smoker plans at www.SmokerPlans.com

YOU can be a #SmokerBuilder!

Update Description

So, your wanna build your very own smoker! BUT you don't have much of a budget Or any budget at all! Well, luck for you, I know what it's like to start this Smoker Journey with no funds and happy to share some tips with you on how to build your first pit on a budget!

Here are some things we'll cover in this episode:
-How to Find Material
-How to Get Funds
-Build and Sell Methods
-Salvage Techniques
AND MORE!

Hopefully this episode will give some useful info on what step to take next on your SmokerBuilding Journey!

You're listening to the PitMaster Secrets Podcast!

Tom and I started SmokerBuilder in 2010 with the vision to help people build smokers and teach them how to use them. Since then we have helped thousands of people build their first smoker.

Now it's your turn! We want to give you a FREE set of our SmokerPlans! Our plans have been selling for $79.00 and up for over 10 years now and we want to make sure you get your opportunity to claim your free set before they are gone!

Claim you FREE set of our smoker plans at www.SmokerPlans.com

YOU can be a #SmokerBuilder!

If you want to build your own smoker the right way the first time but you don't want to weld check out our easy to assemble kits and parts to build your own UDS Drum Smoker!  Click Here to check out our selection! Update Description

"I want to build a Smoker, But I don't know how to weld or even what type of welder I need!"
If you've said this to yourself or someone else: This episode is for YOU!
In this episode we talk about the type of welder you need to get started on your PitBuilding journey!

Topics we'll cover include:
-The Different Types of Welders
-Different Wattages and Amperages
-Size of Welders
-And MORE!

Hopefully this episode will give some useful info on what step to take next on your SmokerBuilding Journey!

 I started SmokerBuilder in 2010 with the vision to help people build smokers and teach them how to use them. Since then I have helped thousands of people build their first smoker.

YOU can be a #SmokerBuilder!

If you want to build your own smoker the right way the first time but you don't want to weld check out our easy to assemble kits and parts to build your own UDS Drum Smoker on Smokerplans.net!  We call ours the Super55 because it's built using a 55 gallon drum barrel!  Here's the links to find it Super Easy!!
https://smokerplans.net/products/super55-and-barrel-uds-drum-smoker-kit-combo
                                                            or
https://smokerplans.net/products/super55-uds-drum-smoker-kit



Update Description