Explorez tous les épisodes du podcast Fire and Steel
| Titre | Date | Durée | |
|---|---|---|---|
| And we're back. | 19 Mar 2026 | 00:03:17 | |
Chris and Onur have started a new podcast. Check it out. Hammers and Hot takes | |||
| The Final Episode – A Relatively Short Farewell | 07 Mar 2026 | 01:02:04 | |
Why Fire & Steel Is Coming to an End What started nearlyfive years ago as a solo project, with Toby interviewing guests from across theworlds of blacksmithing, craft, and beyond, gradually evolved over time.Eventually Onur joined the show, and later Chris came on board as well,creating a three-person format that allowed the conversation to flow morenaturally and made it easier to keep episodes going even when one personcouldn’t make it. The podcast changed shape a few times, as many long-running shows do. Like mostindependent podcasts, it was always something done alongside work, life, andeverything else, which sometimes made schedules difficult and episodes harderto keep consistent. About ten weeks ago weattempted a bit of a relaunch — aiming to make the show more structured andintentionally positive, with the goal of putting something constructive outinto the world rather than simply reacting to whatever was happening in the newscycle. But despite thatintention, the conversations often drifted back toward the same place:discussing the problems and negativity that seem to dominate so much of publicdiscourse. For Toby inparticular, that raised a bigger question about what the podcast wascontributing to the world. A big personal goal is to create things thatultimately honour God and bring something positive into people’s lives. When itbecame clear that the podcast was continuing to lean toward discussing thenegative side of things, it started to feel like the right time to step awayrather than continue down that road. So after five years,this will be the final episode of Fire & Steel. Thank you to everyonewho has listened along the way — from all of us, and very much from mepersonally. Through the podcast I’ve had the chance to speak with so manyinteresting and thoughtful people, and I’ve been fortunate enough to turn manyof those conversations into genuine friendships. I’m incredibly grateful forthe kindness people have shown me over the years, the things people have donefor me, and the opportunities I’ve had to help others as well. While I can’tname everyone, it’s been an absolute privilege to connect with so many peoplethrough this show, and I’ll always be thankful for that. A huge thank you aswell to the Patreon supporters who backed the show and helped keep it going.Some of you have been supporting us for years, and we’re incredibly gratefulfor that support. In particular, thank you to: Alex Greenaway, WorkingHands Podcast, Keith Colby (Knifematerial.at), Refined by James,KraftyMan Forge, Fingal, Mike Nigh, Tim Kingsford, Timfrom TurgWorks, AJ (Ajmal Inayat Khan Afridi), Donny Dulevich,Sharman Knives, Coppertop Customs, OnlyFans@BenCuttsKnifeworks, Triple-T Podcast, Brigham Kindell, NorthernIron Forge, Joey Atilano, Ginger – Team Onur, Bob Gore –Metalstorm Forge, Hobby Hawk Knives, and Bryan Hunt (Hidden RoseForge). Your support genuinelymeant a lot to us. And of course, aspecial thank you to Chris and Onur. Not just for being part of the podcast,but for their friendship as well. P.S. If you’ve already ordered shirts or stickerpacks, don’t worry — they haven’t been forgotten. We will still be having themprinted and posting them out. And if anyone would still like to grab one, youcan do so through the links over the next week. After that, we’ll be closing itdown and that will be the final run.
Support us at Patreon https://www.patreon.com/fireandsteelpodcast or buy our merch tshirts stickers Find us at https://www.instagram.com/fireandsteelpodcast/ https://www.instagram.com/murrillforge/ Email info@murrillforge.co.uk Onur https://www.instagram.com/diesineveryfilm/ YouTubehttps://www.youtube.com/user/Diesineveryfilm | |||
| AI, Algorithms & American Noise | 28 Feb 2026 | 01:19:25 | |
Episode 11 This week on the Fire & Steel Podcast we ended up going somewhere we didn’t expect — as usual. We talk about:
We also wrestle with bigger questions:
It’s not a rant. It’s not a manifesto. Support us at Patreon https://www.patreon.com/fireandsteelpodcast or buy our merch tshirts stickers Find us at https://www.instagram.com/fireandsteelpodcast/ https://www.instagram.com/murrillforge/ Email info@murrillforge.co.uk Onur https://www.instagram.com/diesineveryfilm/ YouTubehttps://www.youtube.com/user/Diesineveryfilm | |||
| Smart tools ,dumb days | 07 Feb 2026 | 00:54:25 | |
Episode 10 🔥 Fire & Steel Podcast — This Week’s Episode This week on the Fire& Steel Podcast, it’s a loose, honest, very real catch-up episode — thekind that happens when makers sit down, hit record, and let the conversation gowhere it wants. We start by ventingabout modern software that’s powerful on paper but maddening in practice.LightBurn, Photoshop, Premiere Pro — all incredible tools, all capable ofcompletely derailing your day when they decide not to behave. If you’ve everfelt like software is actively gaslighting you, you’ll feel seen. Chris talks throughordering parts for his various project vehicles, including using ChatGPT towork out gearing ratios — one of those moments where AI can genuinely beincredibly helpful, saving time and brainpower when the maths gets a bit heavy. That naturally leadsinto a wider conversation about AI and ChatGPT more generally: when it’sgenuinely brilliant at problem-solving, and when it’s very confidently wrong.Toby shares a recent experience where ChatGPT absolutely stitched him up whiletrying to solve a Premiere Pro issue, confidently making things up and turninga simple problem into a deeply frustrating one — and why blind trust in AItools can sometimes make things worse rather than better. We also dip into thejoys of phone providers, network issues, and delivery companies, including anespecially painful run-in with UPS, and how systems designed for “efficiency”often seem engineered to remove any actual human logic from the process. There’s no rigidstructure this week — just an unfiltered conversation about tech, tools, AI,projects, and the everyday frustrations of running businesses and buildingthings in an increasingly automated world. Expect rants, laughs,honesty, and the reassurance that it’s not just you losing your mind.
Support us at Patreon https://www.patreon.com/fireandsteelpodcast or buy our merch tshirts stickers Find us at https://www.instagram.com/fireandsteelpodcast/ https://www.instagram.com/murrillforge/ Email info@murrillforge.co.uk Onur https://www.instagram.com/diesineveryfilm/ YouTubehttps://www.youtube.com/user/Diesineveryfilm | |||
| Masters of the universe | 31 Jan 2026 | 01:15:59 | |
Episode 9 Onur is back in thehot seat this week, joining Toby and Chris for a wide-ranging conversation thatmanages to be both educational and unintentionally entertaining. As always, the episodekicks off with some honest talk about social media — how we’re using it, howit’s evolving, and the ongoing challenge of balancing real craftsmanship withthe modern expectation to document everything. Toby shares detailsabout several exciting commissions currently on the horizon, including a numberof knives and the potential for an upcoming sword build. The discussionexplores what goes into projects at that level, the responsibility behindcommissioned work, and why these builds are rarely as straightforward as peoplemight assume. Chris talks us throughhis laser welder — what drove the decision to invest in one, how he’s gettingon with it so far, and how tools like this are beginning to reshape workflowsfor modern makers. Meanwhile, in what maybe one of the more “Onur” moments to date, we hear the story of his landlordunexpectedly catching him half-naked in the workshop… a reminder that no matterhow professional we try to be, workshop life rarely goes entirely to plan. Despite the occasionalchaos, this episode is packed with practical insight, thoughtful conversation,and a genuine look behind the curtain at what life is really like for workingmakers.
Support us at Patreon https://www.patreon.com/fireandsteelpodcast or buy our merch tshirts stickers Find us at https://www.instagram.com/fireandsteelpodcast/ https://www.instagram.com/murrillforge/ Email info@murrillforge.co.uk Onur https://www.instagram.com/diesineveryfilm/ YouTubehttps://www.youtube.com/user/Diesineveryfilm | |||
| More angles exist | 24 Jan 2026 | 01:26:53 | |
Fire & SteelPodcast — Episode 8 This week it’s just Toby& Chris — no Onur — and it turned into one of those episodes that feelsless like a “rant” and more like a genuinely useful conversation. We talk about socialmedia, how we each use it, and the real-world ways it can actually bringmoney in (without it turning into that classic doom-and-gloom “I hateInstagram” chat). We share what’s worked for us, what hasn’t, and the sort ofcontent that seems to move the needle when you’re trying to grow a business andnot just post for the sake of posting. The main chunk of theepisode goes deep into AI — how we’re using it, why so many people seemweirdly proud of refusing to touch it, and what they’re missing. Toby speaksopenly about how AI has genuinely helped him as someone who’s dyslexic andmassively idea-driven — where the thoughts are there, but getting them outof his head and into something real can be the hard part. We chat about thedifference between typing prompts vs using voice conversations, and howbeing able to work through ideas out loud can feel like having someone sat inthe passenger seat helping you build something in real time — fromresearch, to planning, to writing documents and PDFs… all while driving downthe motorway. But it’s not blindhype either — we also talk about the reality that AI can be confidentlywrong, sometimes wildly so, and why you still need your own judgement. Usedproperly, it’s not making people dumber — it’s helping people move faster,think clearer, and actually execute. And because itwouldn’t be Fire & Steel without a bit of gear talk… Chris also shares hislatest madness: another truck project (twin cab dually, 8-foot bed… anda Cummins swap in the works), plus a new laser that’s turned up for him totest. A proper mixed bagthis week — business, tools, tech, and the way the world’s changing whetherpeople like it or not.
Support us at Patreon https://www.patreon.com/fireandsteelpodcast or buy our merch tshirts stickers Find us at https://www.instagram.com/fireandsteelpodcast/ https://www.instagram.com/murrillforge/ Email info@murrillforge.co.uk Onur https://www.instagram.com/diesineveryfilm/ YouTubehttps://www.youtube.com/user/Diesineveryfilm | |||
| Shh we don't talk about it | 17 Jan 2026 | 01:22:11 | |
Episode 7 This week on theFire & Steel Podcast… it’sa bit of a workshop update episode… with the usual detour into everythingelse. Toby’s been deep in forgemode this week, making some big changes to the workshop — taking downwalls, shifting equipment, and reshuffling the space to make room forsomething new: a silver ring-making jewellery class coming soon toMurrill Forge. The only downside? From there, theconversation (as always) wanders into the real important stuff — including abit of a rant about modern celebrity culture, and how some people in thepublic eye can come across as performatively caring, disingenuous, andmore focused on appearances than real impact. It’s one of thoseepisodes that starts in the forge… and ends up somewhere completely different. In this episode Top of Form Bottom of Form
Support us at Patreon https://www.patreon.com/fireandsteelpodcast or buy our merch tshirts stickers Find us at https://www.instagram.com/fireandsteelpodcast/ https://www.instagram.com/murrillforge/ Email info@murrillforge.co.uk Onur https://www.instagram.com/diesineveryfilm/ YouTubehttps://www.youtube.com/user/Diesineveryfilm | |||
| Happy new year ( we bought opinions ) | 10 Jan 2026 | 02:01:45 | |
Happy new year ( we bought opinions )Episode 6 After a short break, we’re back for the first episode of the year — and, as it turns out, we had a fair bit to get off our chests. This episode is a loose, unscripted catch-up where we ease back into the rhythm of the podcast, wander through a few big ideas, and follow the conversation wherever it naturally goes. Some light-hearted moments, some deeper discussions, and the usual detours you’d expect when we haven’t been behind the mic for a few weeks. Think of this one as a reset rather than a manifesto — a long-form conversation to kick the year off before we get back into more structured episodes. Normal service resumes shortly… probably. Support us at Patreon https://www.patreon.com/fireandsteelpodcast or buy our merch tshirts stickers Find us at https://www.instagram.com/fireandsteelpodcast/ https://www.instagram.com/murrillforge/ Email info@murrillforge.co.uk Onur https://www.instagram.com/diesineveryfilm/ YouTubehttps://www.youtube.com/user/Diesineveryfilm | |||
| Episode 5 — Lasers, AI Chaos, Plumbing Pain & Tools We’d Never Lend | 20 Dec 2025 | 01:04:28 | |
Episode 5 — Lasers, AI Chaos, Plumbing Pain & Tools We’d Never Lend It’s just Toby and Chris this week, with Onur out sick — which means things drift slightly off the rails in the usual Fire & Steel fashion. Toby talks about finally getting hands-on with his laser, experimenting with rotary setups, Yeti mugs, brass pieces, and the strange world of EDC coins, pills, and ultra-hyped collectibles. We dig into maker marketing, limited drops, and why some people will buy anything if it’s hyped hard enough. Chris breaks down his recent run of AI-generated posts, why people love them, and why a loud minority absolutely lose their minds over AI. We talk about anti-AI outrage, creativity, research tools, and why most of the anger feels performative rather than practical. “We also drifted into a surprisingly thoughtful conversation about faith, Christianity, and using AI as a research tool — and why that topic seems to upset people far more than it probably should.”“We also drifted into a surprisingly thoughtful conversation about faith, Christianity, and using AI as a research tool — and why that topic seems to upset people far more than it probably should.” Toby goes on a very real rant about modern customer support, hour-and-forty-minute hold times, faulty pumps, unpaid troubleshooting, and why tradespeople end up charging what they do. A brutally honest look at why “just fitting it cheaper” often costs far more in the long run. We talk about expanding forge classes, adding jewellery and ring-making, balancing weekday vs weekend courses, and the long-term reality of running multiple income streams. Knives are a luxury. Plumbing is a necessity. That tension shapes everything. The tool game takes a turn this week, drifting into which tools we’d never lend out and which brands we secretly judge people for. Ryobi gets dragged. Brand loyalty gets questioned. Opinions are strong. A classic two-man Fire & Steel episode: tools, tech, rants, business reality, AI, and the kind of conversations that probably make more sense when Onur is around — but still land exactly where they should. 🖥️ Lasers, EDC Culture & Maker Hype🧠 AI, Art & Manufactured Outrage🔧 Plumbing Nightmares & Why Trades Burn You Out⚒️ Forge Life, Classes & Long-Term Plans🛠️ Tool Talk & Brand Snobbery Support us at Patreon https://www.patreon.com/fireandsteelpodcast or buy our merch tshirts stickers Find us at https://www.instagram.com/fireandsteelpodcast/ https://www.instagram.com/murrillforge/ Email info@murrillforge.co.uk Onur https://www.instagram.com/diesineveryfilm/ YouTubehttps://www.youtube.com/user/Diesineveryfilm | |||
| I've lost my temper | 06 Dec 2025 | 01:15:45 | |
Episode 4 This week we drifted far from the workshop and straight into the bizarre world of Hollywood, old movies, and why celebrities seem to be getting stranger by the year. We talk about how older films felt more grounded, more human, and how actors actually looked like… real people. No filters, no airbrushing, no impossibly square jawlines — just solid storytelling and normal-looking humans. We dive into the rise of cosmetic surgery, Ozempic bodies, endless fillers, and how modern Hollywood seems to filter out anyone who looks even remotely like an actual person. This week we imagine the workshop burning down and you can only save ONE tool. Sentimental, practical, and a bit chaotic — exactly how we like it. We also touch on the upcoming Edgy Expo knife show happening in Perth, Scotland in 2026 — a new show on the scene that’s shaping up to be something special. A mix of film nostalgia, Hollywood madness, tool talk, and maker banter. 🎬 Old vs New Movies🌟 Celebrities Aren’t Normal Anymore🔥 Weekly Game — “The Tool You’d Save in a Fire”🔪 Edgy Expo – 30th March 2026 (Perth, Scotland)
Support us at Patreon https://www.patreon.com/fireandsteelpodcast or buy our merch tshirts stickers Find us at https://www.instagram.com/fireandsteelpodcast/ https://www.instagram.com/murrillforge/ Email info@murrillforge.co.uk Onur https://www.instagram.com/diesineveryfilm/ YouTubehttps://www.youtube.com/user/Diesineveryfilm | |||
| Black Friday Rage, Delivery Disasters & Tesla shares | 29 Nov 2025 | 01:26:23 | |
Episode 3 — This week’s episode isa proper mix of workshop life, money talk, seasonal chaos, and the kind ofranting that only happens when you put three makers around microphones. 💸 Toby’s Tesla Share Adventures Toby dives into hisongoing relationship with the stock market, gives an update on his Teslashares, and somehow makes investing sound equal parts sensible and chaotic. 🦃 Chris Surviving Thanksgiving in the US Chris gives us arundown of Thanksgiving from the American side — the food, the atmosphere, thetraditions, and why the whole holiday feels like the warm-up act to Christmas. 🛍️ Chris vs. Black Friday Chris also unloads onBlack Friday: Pure Chris energy. 📦 Delivery Companies Are Still Rubbish We share our courierhorror stories — delays, smashed boxes, missing parcels, lazy drivers — andwonder if any delivery company actually cares anymore. 🛠️ Weekly Game: “What Tool Have You Bought MoreThan Once?” Some tools are sogood, so essential, or so frequently lost/broken that you end up buying themagain… and again. A solid Episode 3 fullof workshop reality, maker talk, rants, tools, and the usual Fire & Steelchaos.
Support us at Patreon https://www.patreon.com/fireandsteelpodcast or buy our merch tshirts stickers Find us at https://www.instagram.com/fireandsteelpodcast/ https://www.instagram.com/murrillforge/ Email info@murrillforge.co.uk Onur https://www.instagram.com/diesineveryfilm/ YouTubehttps://www.youtube.com/user/Diesineveryfilm | |||
| Episode 1-ish — Introductions, Social Media Reality & Tools That Surprised Us | 22 Nov 2025 | 01:12:21 | |
Episode 2 We’re treating thisone as the real first episode of the reboot. 🎙️ Who We Are — The Intro We Forgot to Do LastTime Since we’re expectingnew listeners with the fresh format, we finally introduce ourselves properly: 📱 Social Media Talk — How We Actually Make MoneyOnline We dig into therealities of running workshops and running social media: Honest, blunt, and notas glamorous as people think. 💪 Gym Chat & Christmas Motivation It’s that time of yearwhen everyone suddenly decides to “get back on it.” 🛠️ Segment of the Week: “What’s a SurprisinglyGood Tool?” This week’s picks: Why they made thelist, how we use them, and why they stand out. — The Reboot: New Format, New Energy, SameIdiots (Mostly)
Support us at Patreon https://www.patreon.com/fireandsteelpodcast or buy our merch tshirts stickers Find us at https://www.instagram.com/fireandsteelpodcast/ https://www.instagram.com/murrillforge/ Email info@murrillforge.co.uk Onur https://www.instagram.com/diesineveryfilm/ YouTubehttps://www.youtube.com/user/Diesineveryfilm | |||
| The last and first episode | 15 Nov 2025 | 01:16:23 | |
Episode 1 — TheReboot: New Format, New Energy, Same Idiots (Mostly)
This week marks theofficial reboot of the podcast. After years of winging it, rambling, moaning,and generally hoping for the best, we’ve decided it’s time for a fresh start.The old format has been canned, the slate wiped clean, and we’re kicking off anew, more intentional and professional version of the show — without losing thebanter that got us here in the first place.
In this first episodeof the new era we talk openly about why we’re changing things up: – We’ve outgrown the“hit record and hope” approach – We want betterconversations, better structure, and better value for listeners – We want to grow theaudience beyond just knife-makers and workshop nerds – And frankly… we werebored of listening to ourselves moan every week
Then we get into thegood stuff.
Segment: Laser Talk — LP5, XTool &BWM
We little dive intothe LaserPecker 5, the XTool machines, the BWM fibre lasers, and thedifferences between diode and fibre setups. What each is good for, what’smarketing nonsense, and what’s actually worth your money if you’re a maker,small business, or YouTuber.
Segment: “What’s the Worst Tool You’veEver Bought?”
A new possiblerecurring segment where each of us confesses the most useless, disappointing,or rage-inducing tool we've ever spent money on. Some of these are shockers.One of us clearly still isn’t over it.
What This Reboot Means
We explain our goalfor the new series: – More structured,more thoughtful episodes – Actual workshopstalk that’s useful – Current affairs,business, content creation, and craft – Less ranting for thesake of it – A show sponsorswon’t run away from – And somethinglisteners can actually take value from each week
It’s still us. Stillthe same humour. Still the same chaos in places. Just… grown up a bit. (But not too much —don’t worry, we kept Onur on a short leash this episode.)
Support us at Patreon https://www.patreon.com/fireandsteelpodcast or buy our merch tshirts stickers Find us at https://www.instagram.com/fireandsteelpodcast/ https://www.instagram.com/murrillforge/ Email info@murrillforge.co.uk Onur https://www.instagram.com/diesineveryfilm/ YouTubehttps://www.youtube.com/user/Diesineveryfilm | |||
| Weird Custom upside down left hand file guide | 29 May 2021 | 01:40:12 | |
EP79 Onur and myself talk to Neels Van Den Berg about all the stuff. Links Instagram https://www.instagram.com/blackdragonforge/ Website http://blackdragonforge.com/ Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Email toby@tobyfireandsteel.com Onur https://www.instagram.com/diesineveryfilm/ Youtube https://www.youtube.com/user/Diesineveryfilm
UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 UK Knife Maker Beginner Group | |||
| Got WOOD with Mark Peacock/ Deer River Craftsman | 22 May 2021 | 01:17:01 | |
Ep 78 Knife making podcast EP78 Got wood episode with Onur, myself and Mark as we had some questions about timber. Don't forget to write in your questions for next weeks episode.
Links Instagram https://www.instagram.com/deer_river_craftsman/ Website https://deerrivercraftsman.com/ Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Email toby@tobyfireandsteel.com Onur https://www.instagram.com/diesineveryfilm/ Youtube https://www.youtube.com/user/Diesineveryfilm
UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 UK Knife Maker Beginner Group | |||
| Nick Rossi knife forging extraordinaire | 15 May 2021 | 01:13:19 | |
EP77 Nick Rossi, forging knives for more of his life than not. Onur and I chat to nick about his years of teaching and some of the lessons he learned from it. Workshops, weight lifters and more.
Links Instagram https://www.instagram.com/nickrossiknives/ YouTube https://www.youtube.com/watch?v=GymtIkrPXzE Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Email toby@tobyfireandsteel.com Onur https://www.instagram.com/diesineveryfilm/ Youtube https://www.youtube.com/user/Diesineveryfilm
UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 UK Knife Maker Beginner Group | |||
| Abrasives everything you ever wanted to know about them and some you didn't | 08 May 2021 | 01:47:34 | |
EP76 Onur and I talk abrasives with our expert Vinz from The UK Blade Show we try to make it a simple as possible to lay out exactly what belts are for what.
Links Instagram https://www.instagram.com/ukbladeshow/ YouTube https://www.youtube.com/channel/UCgkE_PTsmeGE1xwX3-eFmFA UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 UK Knife Maker Beginner Group https://www.facebook.com/groups/816973399135620/
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| Sharpening secrets with Ryky Tran of the Burrfection YouTube channel | 24 Apr 2021 | 01:50:37 | |
EP75 I chat with the ultimate student and possible master of knife sharpening. His YouTube channel is a big part responsible for my knowing how to sharpen a knife with a stone.
Links Instagram https://www.instagram.com/rykytran/ Website https://store.burrfection.com/?currency=GBP YouTube https://www.youtube.com/channel/UCOluHMoKJ6CrS0kcybhaThg UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 UK Knife Maker Beginner Group https://www.facebook.com/groups/816973399135620/
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| Kevin Cashen: Steel, Phone calls, pagers and swords | 17 Apr 2021 | 01:46:00 | |
EP74 ABS master smith Kevin Cashen joins Onur and Toby for a conversation about metallurgy, heat treat men and heaps more if you're looking to up your understanding of what's going on inside your blade during heat treatment then listen up. Links Kevin Instagram https://www.instagram.com/kevin.cashen/ Website https://cashenblades.com/ Onur Instagram https://www.instagram.com/diesineveryfilm/ Youtube https://www.youtube.com/channel/UCJFLSBWL0djrsOrtpTuNIsw UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 UK Knife Maker Beginner Group https://www.facebook.com/groups/816973399135620/
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| Workshop safety " HONEST" Onur and Dan co-hosts | 10 Apr 2021 | 01:15:30 | |
EP73 Possibly the funniest podcast I remember in a while, Dan Moss and Onur Caglar were this weeks co-hosts with my self discussing workshop safety and safety gear. Links Dan Instagram https://www.instagram.com/iastudios_dan/ Youtube https://www.youtube.com/channel/UCZ3rO8Nb9I1p9Wh_lQ6ebew Onur Instagram https://www.instagram.com/diesineveryfilm/ Youtube https://www.youtube.com/channel/UCJFLSBWL0djrsOrtpTuNIsw UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 UK Knife Maker Beginner Group https://www.facebook.com/groups/816973399135620/
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| Key hole knife and it's father Rodrigo Sfreddo | 03 Apr 2021 | 01:26:17 | |
EP72 Brilliant to catch up with the one and only Rodrigo Sfreddo again after a couple of years. His start out from working out of an actual wardrobe in his apartment. To becoming a master smith responsible for one of the greatest knife handle constructions of all time. Links Instagram https://www.instagram.com/r.sfreddoknives/
UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 UK Knife Maker Beginner Group https://www.facebook.com/groups/816973399135620/
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| Banned for the stink of death, Field and Steel | 27 Mar 2021 | 01:20:42 | |
EP71 This weeks guest was the highly skilled Steve Armstrong From Field and Steel, We talk about him growing up in a Wallace and Gromit type cellar and getting banned from a workshop for making it stink like death. Oh and knives and axes and stuff. Links Instagram https://www.instagram.com/field_and_steel/
UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 UK Knife Maker Beginner Group https://www.facebook.com/groups/816973399135620/
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| What's a Pickleback and other listeners questions co-host Fingal Ferguson | 13 Mar 2021 | 01:30:29 | |
EP70 Fingal Joins me as co-host together we answer listeners question on the purpose of a hamon , favourite sausage, steel choices and loads more. I also find out what a pickleback is. Links Instagram https://www.instagram.com/fingalferguson/ Website https://www.fingalfergusonknives.com/
UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 UK Knife Maker Beginner Group https://www.facebook.com/groups/816973399135620/
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| 69, workshops and tools with Jezz and Onur | 06 Mar 2021 | 01:43:01 | |
69, workshops and tools with Jezz and Onur 3 slightly broken men's point of view on how to set up a workshop and lessons learned from moving premises. Links Jezz Instagram https://www.instagram.com/oblivionblades/ Website https://oblivionblades.com/ Onur Instagram https://www.instagram.com/diesineveryfilm/ Youtube https://www.youtube.com/channel/UCJFLSBWL0djrsOrtpTuNIsw Show sponsors UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 UK Knife Maker Beginner Group https://www.facebook.com/groups/816973399135620/
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| Walter Sorrells, Probably the reason YOU got into knife making. | 27 Feb 2021 | 01:24:19 | |
Ep68 This absolute gentleman Walter Sorrells was a pleasure to talk to, he has so much knowledge and an origin story to inspire. His YouTube videos have been responsible for more makers starting up that almost anything else apart from maybe Forged in Fire of which he was also on. Links Instagram https://www.instagram.com/walterstactix/ Website https://lnky.in/waltersorrells
Show sponsors UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 UK Knife Maker Beginner Group https://www.facebook.com/groups/816973399135620/
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| Dave Evader 4 hours a day making knives 2 hours playing drums | 20 Feb 2021 | 01:08:25 | |
Ep67 Dave is a fun guy to chat with and a prime example of how to grow a social media platform doing what you love all the while keeping your integrity. Check out his links below. Links Instagram https://www.instagram.com/daveerving_evaderknives/ Website https://www.evaderknives.com/
UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 UK Knife Maker Beginner Group https://www.facebook.com/groups/816973399135620/
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| Joel Blacksmith, The artist behind the emojis | 13 Feb 2021 | 01:15:16 | |
Ep66 Joel and I speak about his training at Hereford and his reason he makes the sort of knives he does including why he adds emojis to his knives and where its going from here. Links Instagram https://www.instagram.com/joelblacksmith/ Website https://www.joelblackknives.com/
UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 UK Knife Maker Beginner Group https://www.facebook.com/groups/816973399135620/
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| Joanna Vasquez 'Yes I'm the girl that makes knives" | 06 Feb 2021 | 01:21:55 | |
Ep65 Jo was hysterical to chat to she's a young lady knife maker a real girly girl with a tough side making knives, dirt bike racing, horse riding. She was so fun to talk to and is coming to knife making from a completely different angle to anyone I've met. I'm really excited to watch her knife making grow over the next couple of years. Please go and follow her at the links below. Links Instagram https://www.instagram.com/skiskijo/ https://www.instagram.com/livtruenorth/ Website https://www.livtruenorth.com/
UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 UK Knife Maker Beginner Group https://www.facebook.com/groups/816973399135620/
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| Fingal Ferguson, The best hair in the industry | 30 Jan 2021 | 01:31:36 | |
EP64 Fingal Ferguson an extraordinary maker from Ireland. "when I first started out there was a next and eggs next to my grinder" "Part of me was like hey let's have fun with this, lets use sweetcorn handle material " "Knives were always on the back rung apart from my sanity lol" "every mess up of a knife has taught me something I think that you take those collection of mistakes and they become the elements of your boundaries and where you can take things" "Your name's Fingal you wanna make knives? Lets make an F with knives" Links Instagram https://www.instagram.com/fingalferguson/ Website https://www.fingalfergusonknives.com/
UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 UK Knife Maker Beginner Group https://www.facebook.com/groups/816973399135620/
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| How Jezz became Oblivion Blades, the full story | 16 Jan 2021 | 01:43:36 | |
EP 63 It felt time to get an Aussie back on and who better than the one and only Jerarmie Heywood, steel supplier extraordinaire. This was a full interview right back to little tiny baby Jezz of old. Links Instagram https://www.instagram.com/oblivionblades/ Website https://oblivionblades.com/
UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 UK Knife Maker Beginner Group https://www.facebook.com/groups/816973399135620/
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| Sandy young Scotsman in Leeds | 09 Jan 2021 | 01:19:48 | |
EP62 Great way to start the year by talking Sandy Young from Young knives. About knife making, taking a break from knife making, family, and loads more. Links Instagram https://www.instagram.com/youngknives_/ Website https://www.young-knives.co.uk/
UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 UK Knife Maker Beginner Group https://www.facebook.com/groups/816973399135620/
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group https://www.facebook.com/groups/711126822742169/
| |||
| The 2 "not" Irish Sam's Christmas special | 19 Dec 2020 | 01:32:10 | |
EP61 We end the year of 2020 with great thanks for your support as the listener and just with thanks that 2020 is over. Looking forward to an awesome 2021 Where things can only get better as D:Ream once sung. I have the 2 awesome guests on to chat the year out and the new one in Sam Gleeson and Sam Dunn. Links Sam Gleeson Instagram https://www.instagram.com/thisiswhatwedoo/ Website www.thisiswhatido.ie Sam Dunn Instagram https://www.instagram.com/dunn_bladeworks/
UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 UK Knife Maker Beginner Group https://www.facebook.com/groups/816973399135620/
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| Making and restoring knives, Dean Bruce | 12 Dec 2020 | 01:11:19 | |
EP60 My guest is Dean Bruce from Gemini Bespoke Knives. We chat about some of the things that make him tick like the restoration of old tools and knives.
Links Instagram https://www.instagram.com/gemini_bespoke_knives/ Website https://geminibespokeknives.com/
UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 UK Knife Maker Beginner Group https://www.facebook.com/groups/816973399135620/
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| UK Catchup and possibly the best guest cameo ever. | 05 Dec 2020 | 00:34:52 | |
EP59 Catch up with me and my recent move to the UK, UKnifemaker Supplies and arguably the best guest ever.
Links UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 UK Knife Maker Beginner Group https://www.facebook.com/groups/816973399135620/
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| Matt from the UK knifemakers Guild | 28 Nov 2020 | 01:05:04 | |
EP58 Chatting with Matt from the UK Knifemakers Guild.
Links Instagram https://www.instagram.com/uk_knifemakers_guild/ UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 UK Knife Maker Beginner Group https://www.facebook.com/groups/816973399135620/
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| Owen Bush, "People aren't that freaked out by swords" | 21 Nov 2020 | 01:06:13 | |
EP57 Owen Bush, highly respected knife maker, blacksmith and teacher.
Links Instagram https://www.instagram.com/owenbushbladesmith/ Facebook https://www.facebook.com/owen.bush.73 Website https://www.owenbush.co.uk/
UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 UK Knife Maker Beginner Group https://www.facebook.com/groups/816973399135620/ Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| The journey of become a self employed bladesmith and blacksmith | 14 Nov 2020 | 00:54:39 | |
EP56 With Leszek Sikon a UK home grown knife maker educated at Hereford collage of art where he did his bachelor's degree in blacksmithing. He now works out of Kingdom Forge In heart of Suffolk creating his knives and teaches knife making. Links Instagram https://www.instagram.com/lsikonblacksmith/ Facebook https://www.facebook.com/LSikonblacksmith Website https://www.lsikonblacksmith.com/ UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| NSN with Onur Caglar | 07 Nov 2020 | 01:04:32 | |
EP55 Onur Caglar. Knife maker and youtuber it's a No Show Notes episode. So who knows what we said, you better just listen. Links YouTube https://www.youtube.com/user/Diesineveryfilm Instagram https://www.instagram.com/diesineveryfilm/ Facebook https://www.facebook.com/diesineveryfilm/
Sponsor UKnifemaker Supplies https://www.instagram.com/uknifemakersupplies/ https://www.facebook.com/UKnifemaker-Supplies-115420697027398 Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Website Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| How do potential customers find us? | 31 Oct 2020 | 01:11:26 | |
EP 54 The man behind UK Blade Show, Vinz. Possibly the most calming voice in the industry. We chat blade shows, customer awareness and more. links Instagram https://www.instagram.com/ukbladeshow/ Website https://ukbladeshow.com/home Facebook https://www.facebook.com/ukbladeshow
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ website Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| Salem Straub, Riding the tiger | 24 Oct 2020 | 01:06:33 | |
EP 53 Forged in Fire Champion, knife maker and Damascus making extraordinaire. I was a great conversation talking about so many facets of knife making like incredible damascus, being a parent and knife maker, steam power hammers ect. There isn't the best internet connection and a little bit of extra noise in the background on this episode. Its so worth it and I was honoured to have Salem on the podcast. links Instagram https://www.instagram.com/salemstraub/?hl=en Website https://www.prometheanknives.com/
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ website Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group https://www.facebook.com/groups/711126822742169/
| |||
| Forced patinas and 9v battery etching | 17 Oct 2020 | 00:53:33 | |
EP 52 First UK episode I had a great conversation with Craig I'Bell from Swift Knives UK. We chat about his forced patina techniques, etching his makers mark about as cheap as one possibly can, knife style and so much more. Craig's links Instagram https://www.instagram.com/swiftknivesuk/ Website www.swiftknives.co.uk
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ website Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| The Australian Maker collective | 29 Sep 2020 | 01:05:21 | |
Darren Ilias and Rob Semmler Are the 2 men behind the idea of the Australian Maker collective. A group and community designed to bring together makers from all over Australia not only to help makers financially but mentally too. Giving people a place to sell and buy and to ask question, chat about things they are struggling with etc. They will also be using the platform to help different deserving charities to raise much need money for the respective causes. Facebook https://www.facebook.com/aussiemakercollective Darren https://www.facebook.com/2byforge Raising money to fight violence against children https://my.polishedman.com/darren-ilias?fbclid=IwAR0X6PYzrWh5JxQ1NstcVkl-aNjSq3w4IFN82X24_KTCj2wOuLeh0KutXxI Rob https://www.facebook.com/robsonez
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group | |||
| Mark Dainer bringing makers together | 22 Sep 2020 | 00:58:57 | |
Ep 50 WITH GIVE AWAY. Special Guest Mark Dainer of Dainer designs on YouTube comes on to chat about his movement "Makers make it move" a cyclical idea designed to support fellow makers by purchasing materials for our projects from other makers/ small suppliers and telling others about it on social media to help money stay in the community. We also talked about his passion for creating furniture out of scrap wood including pallets. Mark's links Instagram https://www.instagram.com/dainerdesign/ Website https://www.dainerdesign.com/ YouTube https://www.youtube.com/c/DainerDesign Toby Fire and Steel T shirt Pre-order https://www.tobyfireandsteel.com/shop/tshirt-tfs-preorder https://www.tobyfireandsteel.com/shop/tfs-hoodie-black-pre-order
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group https://www.facebook.com/groups/711126822742169/ my invite code: https://app. I am micro-investing with Raiz. If you join using this link, we will both get $5 when you use raizinvest.com.au/invite/BQ3EL6 | |||
| Green Beetle knives / YouTube | 15 Sep 2020 | 01:24:56 | |
Great conservation with Steve Calvert of Green Beetle YouTuber. After following him on YouTube for years it was so cool to speak to him. He is such a down to earth guy and so keen to teach and learn, we discuss Social media, YouTube how and why he got into knife making and the pros and cons to part time and full time knife making. Steve's links Instagram https://www.instagram.com/greenbeetleknives/ Youtube https://www.youtube.com/user/greenbeetlegear Merch store https://www.youtube.com/c/GreenBeetle/store
Toby Fire and Steel T shirt Pre-order https://www.tobyfireandsteel.com/shop/tshirt-tfs-preorder https://www.tobyfireandsteel.com/shop/tfs-hoodie-black-pre-order Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group https://www.facebook.com/groups/711126822742169/ my invite code: https://app. I am micro-investing with Raiz. If you join using this link, we will both get $5 when you use raizinvest.com.au/invite/BQ3EL6 | |||
| Men's mental health n stuff with Rob Semmler | 08 Sep 2020 | 01:07:57 | |
Mens mental health n stuff with Rob Semmler Ep 48 Rob Semmler is one of those guys who seems to have flown under the radar for years. Learning his skills learning his craft and always trying to help someone out all the while. As he starts to transition into a full time maker, he is beginning to be more vocal on line with but still holding the same message and wanting to help makers get a start. We discuss his passions from men's mental health issues, shouting out other people who are making a difference and of course knife making in many formats. Robs links Instagram https://www.instagram.com/robsonez/ Facebook https://www.facebook.com/wolfandeagle.forge Website https://www.wolfandeagleforge.com/ Toby Fire and Steel T shirt Pre-order https://www.tobyfireandsteel.com/shop/tshirt-tfs-preorder https://www.tobyfireandsteel.com/shop/tfs-hoodie-black-pre-order
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group https://www.facebook.com/groups/711126822742169/ my invite code: https://app. I am micro-investing with Raiz. If you join using this link, we will both get $5 when you use raizinvest.com.au/invite/BQ3EL6 | |||
| CNC knife making EP47 | 01 Sep 2020 | 01:02:48 | |
Talking to Luke Scheepers about knife making from automated machines point of view and how making knives with CNC and designing with CAD helps him with his want to make different and better knives. It feeds his curiosity from the standpoint of what is possible in the making and designing stages.
Luke's links Instagram https://www.instagram.com/scheepersbuilt/ Website https://www.scheepersbuilt.com/ Facebook https://www.facebook.com/profile.php?id=100008091285432
Toby Fire and Steel T shirt Pre-order https://www.tobyfireandsteel.com/shop/tshirt-tfs-preorder https://www.tobyfireandsteel.com/shop/tfs-hoodie-black-pre-order
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group https://www.facebook.com/groups/711126822742169/ my invite code: https://app. I am micro-investing with Raiz. If you join using this link, we will both get $5 when you use raizinvest.com.au/invite/BQ3EL6 | |||
| Tim Kingsford prybar King | 18 Aug 2020 | 01:03:01 | |
Chatting with Tim Kingsford Australian knifemaker about knifemaking, moving house and edc prybars. Toby Fire and Steel T shirt Pre-order https://www.tobyfireandsteel.com/shop/tshirt-tfs-preorder https://www.tobyfireandsteel.com/shop/tfs-hoodie-black-pre-order
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group https://www.facebook.com/groups/711126822742169/ my invite code: https://app. I am micro-investing with Raiz. If you join using this link, we will both get $5 when you use raizinvest.com.au/invite/BQ3EL6
| |||
| Restoring old tools, Jacob McNamara | 11 Aug 2020 | 01:05:02 | |
Ep 45 talking about tool restorations, blacksmithing and a little bit of knifes. Links Facebook https://www.facebook.com/planeoldiron Instagram https://www.instagram.com/planeoldiron/ Toby Fire and Steel T shirt Pre-order https://www.tobyfireandsteel.com/shop/tshirt-tfs-preorder https://www.tobyfireandsteel.com/shop/tfs-hoodie-black-pre-order
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group https://www.facebook.com/groups/711126822742169/ my invite code: https://app. I am micro-investing with Raiz. If you join using this link, we will both get $5 when you use raizinvest.com.au/invite/BQ3EL6
| |||
| Knife shop, distractions, and motivation | 04 Aug 2020 | 01:03:46 | |
EP 44 As a knife maker and knife shop owner Nathan Roennfeldt has a bit of a different view into the knife industry including the different types of people that buy knives. We discuss his style of knives, motivation a house builds amongst many other things. Links Instagram https://www.instagram.com/naroe_blades/ Facebook https://www.facebook.com/naroeblades Toby Fire and Steel T shirt Pre-order https://www.tobyfireandsteel.com/shop/tshirt-tfs-preorder https://www.tobyfireandsteel.com/shop/tfs-hoodie-black-pre-order
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group https://www.facebook.com/groups/711126822742169/ my invite code: https://app. I am micro-investing with Raiz. If you join using this link, we will both get $5 when you use raizinvest.com.au/invite/BQ3EL6
| |||
| Knife making, Iron man suits and Battle Star Galactica | 28 Jul 2020 | 00:57:11 | |
EP43 Baz Is a knife maker that works at Tharwa Valley Forge bit is a man that doesn't let constraints of any sort stop him from making anything. A keen astronomer he decided to build his own observatory so he didn't had to set up his telescope every day. Ready for a new challenge he decide to build a mark 4 Iron Man suit and if that wasn't big enough he is now building a full size mark 2 colonial Viper (from Battle Star Galactica )
Links Website https://www.buildsbybaz.com/ Viper build https://www.facebook.com/groups/240486113096646 Iron Man suit build https://www.facebook.com/groups/495354263946981 Toby Fire and Steel T shirt Pre-order https://www.tobyfireandsteel.com/shop/tshirt-tfs-preorder https://www.tobyfireandsteel.com/shop/tfs-hoodie-black-pre-order
Find us at https://www.instagram.com/tobyfireandsteel/ https://www.facebook.com/MurrillandSon/ Products and site Email toby@tobyfireandsteel.com TFS Knife maker Challenge Group https://www.facebook.com/groups/711126822742169/ my invite code: https://app. I am micro-investing with Raiz. If you join using this link, we will both get $5 when you use raizinvest.com.au/invite/BQ3EL6
| |||