Retour

Explorez tous les épisodes du podcast CDFAM Computational Design Symposium

Plongez dans la liste complète des épisodes de CDFAM Computational Design Symposium. Chaque épisode est catalogué accompagné de descriptions détaillées, ce qui facilite la recherche et l'exploration de sujets spécifiques. Suivez tous les épisodes de votre podcast préféré et ne manquez aucun contenu pertinent.

Rows per page:

1–50 of 191

TitreDateDurée
Form Follows Force: Data-Responsive Stochastic Algorithms For Additive Footwear18 Oct 202600:18:06

CDFAM Computational Design Symposium — Tokyo 2026

David Burpee · MorphXgen

Many Additive footwear platforms promise a level of customization beyond traditional footwear manufacturing processes, but how custom is it really? This presentation will explore a variety of strategies for the integration of various custom data into bespoke additive-ready algorithms in footwear design. The ability to create force-responsive structures through various types of micro lattice to tune flexibility, gradient behavior, anisotropy all within the confines of additive manufacturability parameters. Approaches include multi-agent algorithms with intelligent emergent behavior, simulation-driven anisotropic stochastic lattice structures, and body-responsive data mapping for truly one-of-one additive footwear creations.

Links

Talk page with full transcript

Watch the talk on YouTube

Search this talk's transcript

Cite this talk



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Sub-Optimal: Designer-Built Tools for Additive Manufacturing16 Oct 202600:22:44

CDFAM Computational Design Symposium — Tokyo 2026

Sarat Babu · SARAT

Computational design approaches to optimization are often constrained by the tools available and the established methods for generating optimal forms. With AI coding tools, the barrier for designers to develop their own software and pipelines has dropped considerably.

Sub-Optimal reframes optimization around two priorities: preserving the original designer’s macro intent, and using geometry to address the anisotropic surface roughness of additive manufacturing. The result is neither lattice application nor topology optimization, but a grown internal structure driven by simulation, surface texture and build orientation that remains largely invisible at the macro level.

The talk covers the trust gap senior engineers face with optimized DfAM parts, the use of surface texture to mask layering defects and build orientation, and how the pipeline was built in six weeks for about $400 in AI tokens using open-source libraries including geometry3Sharp and OpenVDB, with 3MF as the output format.

Links

Talk page with full transcript

Watch the talk on YouTube

Search this talk's transcript

Cite this talk



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Introducing AURA, A Reasoning Engine for Design Exploration and Synthesis by Braid15 Oct 202600:23:55

CDFAM Computational Design Symposium — Tokyo 2026

This episode is the opening keynote from CDFAM Tokyo 2026, presented by Guido Cossu and Ivo Timóteo of Braid.

Braid was founded in Tokyo in 2020 by a team drawn from physics, applied mathematics, computational geometry, large-scale simulation and machine learning. At the time, the prevailing view in AI held that scaling end-to-end learning on ever-larger datasets would solve most problems. Braid took a different position: engineering design, where physical accuracy, safety and manufacturability are non-negotiable, requires reasoning from the laws of physics and the constraints of manufacturing rather than pattern-matching from prior examples.

Their system, AURA, combines learning with formal reasoning to move from engineering intent to manufacturable geometry, replacing the manual draw, simulate, review and redraw loop with structured exploration of alternatives that the engineer evaluates and selects from.

In this talk, Cossu and Timóteo explain the semantic architecture behind that approach and show results from deployments in Japanese manufacturing, across several mass-production processes with little in common.

The Best Design Is The Design You Can Make

Guido Cossu; Ivo Timóteo · Braid

Across computational design, the part that performs and the part that can be built are rarely the same part: optimization and generative methods meet the functional targets, and the work of making the result manufacturable happens afterward, by hand, often negating the performance that was gained. Braid closes that gap differently. Rather than optimizing a seed geometry or generating candidates from data, the system designs de novo — geometry reasoned directly from what an engineer specifies: function, physical conditions, the manufacturing process the part must suit, the cost it must meet.

The mechanism is semantic reasoning rather than data-driven generation: a semantic architecture encodes physics, geometry, and manufacturing constraints with their relationships, and enforces constraint satisfaction by construction. Because the manufacturing process is reasoned from rather than filtered for, the geometry is manufacturable from the first output, not repaired into manufacturability afterward.

Braid demonstrate this on real engineering components across several conventional mass-manufacturing processes, each with its own design constraints. The examples come from deployments in Japanese manufacturing industries where tolerances are tight and errors are costly. One system handling processes with so little in common is the crucial point: each result is reasoned from principle, not retrieved from examples of similar parts — which is, in the end, the difference between a design system you can trust on a novel part and one you can only trust on a familiar one.

Links

Talk page with full transcript

Watch the talk on YouTube

Interview with Braid

Cite this talk



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
The Era of Living Machines: How Biology Will Build the Next Generation of Building Materials05 Oct 202600:20:33

CDFAM Computational Design Symposium — DC 2026

Giorgia Cannici · Virginia Tech

What if material fabrication could shift from assembly to growth—and be directed with precision through external fields?

This work introduces magnetotropic plants: genetically engineered organisms in which gravity-sensing organelles (statoliths) are rendered magnetically responsive. By replacing gravitational cues with externally applied magnetic fields, plant growth direction can be actively controlled in real time. This enables programmable morphogenesis, where biological growth becomes a steerable process rather than a fixed outcome of genetics and environment.

The presentation will outline the biological mechanism, the experimental framework, and the implications of this approach for material production.

Magnetic fields act as an invisible, non-contact control layer, allowing spatial and temporal guidance of growth without mechanical intervention.

Beyond applications in microgravity environments such as space, this work suggests a broader shift in how we produce materials—moving from extractive, energy-intensive processes toward growth-driven fabrication, where form emerges from the interaction between engineered biology and designed environmental conditions.

Links

Talk page with full transcript

Watch the talk on YouTube

Search this talk's transcript

Cite this talk



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
From Horns to Armor: Biomimicry, Computational Design, and the Future of Impact Protection03 Oct 202600:19:33

CDFAM Computational Design Symposium — DC 2026

Matthew Shomper · Not a Robot Engineering

Nature has been solving the problem of impact protection for millennia, in order to arrive at solutions far more elegant than anything on the market today. The microstructure of a bighorn sheep’s horn is one of the most striking examples : a geometry that is brutally efficient at scattering and absorbing energy, such that the animal can sustain repeated high-speed collisions without lasting damage. The challenge has always been translating that geometry into something we can actually manufacture.

Additive manufacturing allows us to build internal geometries that were previously impossible to fabricate : graded densities, interlocking fiber patterns, and layered structures that mirror what nature spent millions of years optimizing. By digitally modeling the ram’s horn at the microstructural level and translating those patterns directly into printable designs, we can produce armor components that outperform conventional materials in energy absorption while perfectly conforming to the body.

This work represents a broader shift in protective equipment design: away from material selection alone, and toward architecture as the primary engineering tool.

Links

Talk page with full transcript

Watch the talk on YouTube

Search this talk's transcript

Cite this talk



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Before the Model: Aurora as AI-Grounded Climate Intelligence for Early-Stage Design01 Oct 202600:23:11

CDFAM Computational Design Symposium — DC 2026

Damola Michael; Elliot Glassman · CannonDesign

The environmental design conversation typically begins too late, after massing is committed and geometry is locked. Aurora repositions that conversation to day one, giving architects and engineers an immediate, evidence-based picture of any site before a design tool is opened.

The platform synthesises EPW weather files, CMIP6 climate projections, ASHRAE design conditions, NOAA historical records for US sites, and seismic hazard data into a unified analysis environment, covering temperature and humidity distributions, wind roses, solar radiation by facade orientation, thermal comfort (UTCI, PET, SET), rainfall, carbon intensity, and future projections to 2050. Every analysis is immediately exportable as a formatted PDF or PowerPoint report, ready to present to a client or design team without additional preparation.

Two integrated AI layers surface this data as design insight. A streaming conversational assistant powered by Google Gemini is grounded in the actual EPW and CMIP6 data for the active location. It explains what site climate means for design decisions, renders specific charts inside the conversation, and adjusts application settings through natural language. A second layer generates AI-written summary cards for ASHRAE design conditions and 2050 climate outlooks, automatically scoped to the site.

Aurora does not generate or evaluate geometry. This is intentional: it is a pre-design climate intelligence layer, not a replacement for tools like Autodesk Forma. It provides the environmental literacy that should inform every decision made in those tools, a shared language between architect, engineer, and client before a single wall is drawn.

Links

Talk page with full transcript

Watch the talk on YouTube

Search this talk's transcript

Cite this talk



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Bridging the CAD-to-Simulation Gap: Integrating Meshing-free Isogeometric Analysis into Industrial Workflows01 Oct 202600:15:10

CDFAM Computational Design Symposium — DC 2026

Matthew Sederberg · Coreform

The traditional “design-to-analysis” loop is often bottlenecked by the laborious process of mesh generation, which can consume up to 80% of total simulation time. This presentation introduces Coreform IGA for Abaqus, a solution that brings CAD-exact isogeometric analysis (IGA) directly into the Abaqus ecosystem. By utilizing Coreform’s Isogeometric Analysis approach, users can perform high-fidelity simulations directly on CAD geometry, effectively bypassing the need for traditional finite element meshing.

Links

Talk page with full transcript

Watch the talk on YouTube

Search this talk's transcript

Cite this talk



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
AI-Native, Simulation-Driven Insight with End-to-End Traceability01 Oct 202600:16:32

CDFAM Computational Design Symposium — DC 2026

Mike Park · Flexcompute

Computational design enables wider configuration exploration and reduces time to market, but turning innovation into validated, manufacturable designs is hampered by human-in-the-loop simulation. Manual geometry cleanup, meshing, and data management pace every workflow, while the feedback loops between simulation and the rest of the design organization stay broken by data silos. This talk presents an end-to-end, AI-native approach to closing those loops. GeometryAI applies a novel, topology-aware geometry representation that takes raw CAD to analysis-ready models automatically with mathematical guarantees that facilitate meshing and analysis. Physics-agnostic output feeds CFD, structural, and thermal tools with direct connections to surrogate training and inference. The GPU-native solver Flow360 delivers high-fidelity physics at speeds that tighten feedback loops. Thread ties it together with automatic data lineage, so every run is reproducible, every result is traceable, and institutional knowledge becomes the starting point rather than the bottleneck. Standard web interfaces and Python APIs enable humans and their agents equally. Real-world results are validated with industry-standard AIAA High-Lift Prediction Workshop submissions. Full-aircraft hover analysis is possible in hours. We show how geometry-aware automation, GPU-native simulation, and complete traceability make simulation-driven design genuinely agent-ready, at the scale and speed modern programs demand.

Links

Talk page with full transcript

Watch the talk on YouTube

Search this talk's transcript

Cite this talk



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Optimal Lattice Selection for PCM Thermal Management29 Sep 202600:20:19

CDFAM Computational Design Symposium — DC 2026

Andreas Vlahinos · Advanced Engineering Solutions

PCMs provide cooling without requiring an extra power source, unlike fans or active liquid cooling systems. They absorb peak energy loads during operation and release that heat when the ambient temperature drops, acting as a buffer against rapid temperature changes. This allows for more compact thermal management systems. Because most PCMs have inherently low thermal conductivity, they often fail to absorb or release heat quickly enough for high-demand applications. Designers can significantly improve the thermal performance of Phase Change Materials (PCM) by embedding lattice structures. Embedding a highly conductive lattice, such as aluminum or copper, forms a “thermal skeleton” that functions as a heat highway, dissipating heat more quickly and evenly through the PCM.

Adding a 3D-printed metal lattice can increase the effective thermal conductivity of a PCM system by an order of magnitude compared to pure PCM. The internal structure provides a continuous path for heat conduction, which can double the melting speed. Beyond thermal benefits, the lattice provides mechanical support to the PCM, preventing leakage and helping it maintain its shape during the liquid phase.

Simulating PCMs’ thermal behavior is difficult due to the highly nonlinear nature of latent heat release, the shifting phase-change boundaries, and the significant differences in physical properties between the solid and liquid states. This presentation demonstrates simulation techniques and showcases the process of optimal lattice selection.

Links

Talk page with full transcript

Watch the talk on YouTube

Search this talk's transcript

Cite this talk



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Git for Hardware: Version Control as the Foundation for Agile Systems Engineering29 Sep 202600:15:00

CDFAM Computational Design Symposium — DC 2026

Steve Massey · SysGit

Software development was transformed when version control became infrastructure rather than afterthought. Hardware engineering has not had an equivalent transition. Requirements live in documents. System models are stored in vendor-locked platforms. Design reviews happen in meetings rather than pull requests. The result is programs that cannot iterate at the speed the environment demands.

SysGit applies the tools and workflows that scaled software development — branching, merging, diffing, CI/CD pipelines — directly to systems engineering artifacts, built on SysMLv2 and backed by existing Git infrastructure. Requirements, system models, and verification activities are captured in a single machine-readable format, traceable across the full program lifecycle and accessible to every stakeholder from specialist engineers to contracting officers.

This presentation covers the technical architecture behind that approach, the role of agentic AI in automating requirements generation and model validation, and what continuous acquisition looks like when the digital thread is built on open standards rather than walled gardens.

Links

Watch the talk on YouTube

Search this talk's transcript

Cite this talk



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Artificial Intuition: Building an AI Mind for Electromagnetic Design and Engineering25 Sep 202600:21:54

CDFAM Computational Design Symposium — Washington DC 2026

Michael Frei · ARENA Physica

Most advances in computational design focus on mechanical structure — domains we can visualize and have evolved an intuition for. But as modern hardware becomes increasingly software defined, the unseen and unintuitive world of electromagnetism is taking center stage.

Conventional solvers can simulate fields, yet they cannot imagine new ones. Over the past year, our team has been building toward that capability. At CDFAM NYC and Barcelona, we shared early results from Atlas — an AI that learns electromagnetic behavior inductively from test data rather than deductively from first principles, enabling verification, optimization, and design postulation in domains where classical simulation reaches its limits.

This talk shares our vision for the future of AI-driven electromagnetic design.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
AI-Enabled Assembly Configuration Spaces: Encoding Mechanical Intuition at the Design-Manufacturing Interface25 Sep 202600:20:34

CDFAM Computational Design Symposium — Washington DC 2026

Sai Nelaturi · C-Infinity

The gap between digital design and physical assembly is not primarily a geometry problem. It is a reasoning problem. Engineering teams spend thousands of hours communicating assembly intent through manual CAD workflows, managing configuration complexity across product variants, and catching fitment and feasibility issues that could have been identified before any metal was cut. The cost is measured in weeks of engineering time per product release cycle.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Physics AI as a Strategic Advantage: How Physics-based AI Models Are Reshaping U.S. Defense Engineering24 Sep 202600:20:07

CDFAM Computational Design Symposium — Washington DC 2026

Juan Alonso · Luminary

The next decade of great-power competition will be won or lost in the engineering loop. Adversaries have increased the speed of iteration in hypersonics, undersea platforms, and autonomous aircraft and the U.S. defense industrial base cannot keep up by relying on traditional engineering workflows. Closing that gap requires a step-change in how programs are developed with AI-accelerated engineering.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation

Join leading experts in computational design at all scales for two days of knowledge sharing and networking at CDFAM in Tokyo, October 8-9, 2026



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
From Text to Robotic Assembly: 3D Generative AI and Discrete Robotic Assembly for Making Physical Objects23 Sep 202600:11:24

CDFAM Computational Design Symposium — Washington DC 2026

Alexander Htet Kyaw · MIT

Recent advances in 3D generative AI make it possible to create object geometries directly from natural language, but turning these digital forms into functional physical objects remains a major challenge. Most generated 3D models are meshes that do not contain the component level, structural, material, and assembly information required for robotic fabrication. This presentation introduces a research pipeline that combines 3D generative AI, vision language models, and robotic assembly to transform text prompts into multicomponent physical objects. Rather than only asking what an object should look like, the system reasons about how it should be physically composed, including where stronger, lighter, stiffer, or more flexible components are needed. The work points toward a future in which AI driven design systems can generate not only visual form, but also buildable, reusable, and materially informed assemblies for real world fabrication.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search this talk's transcript



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Computational Design in Aerostructures: Topology Optimization for Conceptual Design and Trade Studies23 Sep 202600:17:18

CDFAM Computational Design Symposium — Washington DC 2026

Brandon DeMille · General Atomics Aeronautical Systems

Computational design methodologies, including topology optimization, are transforming airframe structures development by enabling rapid exploration of design configurations during early conceptual phases. This presentation demonstrates a workflow that enables informed decision-making across disciplines and accelerates the path from initial concept to detailed design. A fuselage case study illustrates the simultaneous optimization of composite laminates for skins, substructure geometry, and overall shaping. This integrated approach facilitates quantitative trade-offs among competing priorities such as cost, structural performance, manufacturability, and production rate.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search this talk's transcript



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
From Requirements to Manufacturable Systems: Agentic AI on a Live Engineering Knowledge Graph22 Sep 202600:18:28

CDFAM Computational Design Symposium — Washington DC 2026

Chris Helmerich · Celedon Solutions

Most ‘AI for engineering’ tools today sit beside the design process with a chat window next to a CAD viewer, a copilot that summarizes documents someone still has to act on. The harder problem is putting AI inside the loop, where it can read and write the same structured representation of the system that engineers, simulations, and downstream manufacturing all depend on.

This talk covers how we approached that problem at Celedon Solutions while building Davinci, an engineering platform where agentic AI operates directly on a live knowledge graph of the system under design. Requirements, components, interfaces, behaviors, and their relationships all live in one connected structure, and the agents that work on it can pull structured model content out of reference documents, generate and compare architectural alternatives against performance and cost constraints, trace requirements through simulation results, and reach into external tools such as parts databases, Python simulations, PLM systems through APIs and Model Context Protocol.

I’ll walk through the design decisions behind a graph-native rather than document-native foundation, show where generative exploration has meaningfully compressed early-phase trade studies in aerospace and defense pilots, and talk honestly about the failure modes where agents confidently produce plausible-looking nonsense, and what guardrails and iteration strategies actually work. The goal is a practical view of what it takes to move AI from the margins of the engineering workflow into the part of the process where design decisions actually get made.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search this talk's transcript



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Fast and Robust Design with Implicit Functions and Direct Simulation21 Sep 202600:19:27

CDFAM Computational Design Symposium — Washington DC 2026

Jan Vandenbrande · nTop

Current Computer Aided Design systems excel in static detailed design but are too fragile and slow to support Design Exploration and Multidisciplinary Design Optimization for conceptual and preliminary design. This talk introduces a new approach to modeling products that overcomes these shortcomings based on implicit functions popularized in the animation industry. The main benefits of the approach is that is responsive to the need to design and redesign products in days or weeks and not month or years because of absolute robustness to parametric change minimizing human intervation; lightning fast evaluations leveraging GPUs; and performing analysis directly from the representation w/o the need of human intervention to generate cumbersome and error prone meshes.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Solving Aerodynamics Problems With Quantum Computers21 Sep 202600:20:15

CDFAM Computational Design Symposium — Washington DC 2026

William Steadman · Quanscient

We present the results of the largest CFD simulations to date deployed on IBM and IonQ quantum hardware through our ongoing collaborations across the aerospace, maritime, and automotive sectors. We will explore the critical trade-offs quantum computing introduces to computational design in aerodynamics and aeroacoustics, while demonstrating how these advancements are being integrated into Quanscient’s multiphysics software.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
The Digital Thread In The Real World: Multiple Partners, Multiple Tools, One Truth21 Sep 202600:20:51

CDFAM Computational Design Symposium — Washington DC 2026

Austin Herrema · Istari Digital

As the Department of Defense accelerates adoption of digital engineering and advanced manufacturing, the challenge is no longer defining the digital thread—it is executing it across a fragmented Defense Industrial Base (DIB). This session will explore a consortium-based approach to demonstrating an end-to-end digital thread spanning design, build, operations, and sustainment—executed within each partner’s native environment.

Rather than forcing tool or data standardization, this effort enables participating organizations to use their own systems, data architectures, and processes while securely sharing only what is necessary to maintain a federated, authoritative source of truth. The result is a practical model for interoperability that reflects real-world constraints: multiple vendors, distributed ownership, and varying levels of digital maturity.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
When Failure Is Not an Option: Bringing Certifiable AI to Engineering Design18 Sep 202600:19:18

CDFAM Computational Design Symposium — Washington DC 2026

Rhushik Matroja · Cognitive Design Systems

Artificial intelligence is poised to automate a large share of design engineering work, yet the technology that excites the commercial world poses a fundamental problem for high-consequence industries. Generative AI is probabilistic by nature. It produces plausible answers, not provably correct ones. In sectors where a single structural failure can ground a fleet, halt a production line, or cost lives, plausibility is not enough. The question is no longer whether AI will transform engineering, but whether we can trust it when failure is not an option.

This talk presents a different path. Cognitive Design Systems is a design exploration platform for mechanical and thermo-mechanical component design. Rather than embedding opaque AI inside traditional CAD software, we bring proven engineering workflows to the AI. Deterministic solvers for topology optimization, finite element analysis, manufacturing-driven design, and cost and carbon assessment produce repeatable, auditable, physically grounded results. A conversational AI layer orchestrates these solvers, interpreting intent and chaining tasks, while the underlying engineering computation remains fully deterministic and traceable. Engineers gain dramatic speed without surrendering verifiability or control.

This is not theoretical. Our approach is shaped by work with demanding industrial leaders including Safran, Thales, MBDA, Toyota, Tetra Pak, and Logitech, spanning aerospace, automotive, defense, and industrial machinery. These are organizations where engineering rigor and certification are non-negotiable.

The implications reach across every engineering sector. As manufacturers face mounting pressure to lightweight structures, accelerate certification, reduce cost and carbon, and modernize their industrial base, the ability to design qualified components faster, with full auditability, becomes a decisive advantage. Trustworthy AI is not a constraint on innovation. It is the precondition for deploying AI in the systems the world depends on. Attendees from industry and policy alike will leave with a clearer view of what responsible, deployable AI for high-consequence engineering actually looks like.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search this talk's transcript



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Measuring Shape Fidelity in Generative CAD Models18 Sep 202600:22:55

CDFAM Computational Design Symposium — Washington DC 2026

Daniel Hambleton · Metafold

Generative AI is rapidly expanding what designers and engineers can create in 3D, but visual plausibility is not the same as geometric fidelity. This presentation asks a practical validation question: how close are AI-generated CAD models really to a target desired shape?

We introduce a feature-vector workflow using the Metafold Shape Similarity technology to compare generated models against reference targets. Each model is encoded into a geometric feature vector, enabling direct comparison through aggregate similarity scores, coordinate-level distance ribbons, scale-normalized metrics, and side-by-side 3D previews. The result is a repeatable method for moving beyond “looks right” evaluation toward measurable shape correspondence.

Using examples from current 3D generative design workflows, the talk demonstrates how feature vectors can expose where a generated model preserves intent, where it drifts, and which geometric features contribute most to the gap.

This approach offers a lightweight validation layer for AI-assisted CAD: fast enough for iteration, interpretable enough for engineering review, and concrete enough to support model benchmarking.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Requirements to Production Part in Minutes: How Physical AI Closes the Loop Between Optimization and Manufacturing17 Sep 202600:16:24

CDFAM Computational Design Symposium — Washington DC 2026

TJ Root · InfinitForm

The gap between optimized geometry and manufacturable components has been the defining constraint of computational design for three decades. Topology optimization produces brilliant forms that machinists cannot cut. Those forms are not editable in CAD / or CAD friendly. Simulation validates performance that mainstream manufacturing cannot reproduce. The result: design cycles measured in months, not days, and engineering organizations forced to choose between what is optimal and what is buildable.

InfinitForm was built to eliminate that tradeoff. The platform takes geometrical, engineering, manufacturing and cost constraints as input and outputs production-ready parametric CAD geometry, optimized simultaneously for structural performance and the specific manufacturing process it will be produced with, whether CNC machining, additive manufacturing, casting, extrusion, or injection molding. Every output carries full design history, constrained sketches, and parametric relationships, making it immediately editable in the CAD environment the engineering team already uses. GPU-accelerated solvers and optimizer, the system compresses what previously required weeks of iteration into minutes of compute.

This talk presents the technical architecture behind that capability, the manufacturing constraint modeling approach that makes outputs buildable rather than merely optimal, and results from production deployments at aerospace, defense, and advanced manufacturing organizations. It examines what changes when design for performance and design for manufacturing are solved as a single problem rather than sequential steps, and what that means for the engineering organizations, defense programs, and industrial supply chains now entering the Physical AI era.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Agentic Engineering: Generative AI in structural applications17 Sep 202600:21:59

CDFAM Computational Design Symposium — Washington DC 2026

Sergey Pigach · CORE studio | Thornton Tomasetti

CORE studio spent a decade building machine learning tools for structural design and analysis, all running as cloud services behind APIs. When MCP arrived, handing those same tools to an agent turned out to be close to trivial. Sergey Pigach demonstrates Bender, an agentic system running on AWS that the firm talks to through Slack: ask it for a concrete column stack and footing for a five-storey residential building in New York, let it make the remaining assumptions, and it calls the tools the engineers use, renders the result and writes a design summary. It lives in Slack deliberately, because an agent sitting in a shared thread already has the context of the conversation around it, which a one-to-one chatbot does not. Specialist sub-agents handle questions like embodied carbon.

From there the talk moves to agents talking to each other. A2A is a protocol for delegation between agents, complementary to MCP rather than competing with it, but it has no discovery layer — a public agent the team put online was found by nobody. That gap prompted Waggle, Pigach's own side project, which crawls for valid agent cards and builds a searchable index with health, quality and trust signals, then delegates a request to whichever agent can handle it. He also shows agents paying each other small amounts to cover expensive work.

The most uncomfortable result is a benchmark. CORE studio asked its own engineers for the hardest structural problems they could devise, assembled 91 of them, graded answers to within one percent, and gave the models nothing but a calculator and a Python sandbox — no internet, no engineering software. They expected around half. It saturated immediately, with the leading models above 94 percent. Tracing backwards showed the unlock was reasoning: the first reasoning model jumped from 38 percent to 74, and the line has run straight up since. Structural engineering, as he puts it, is a verifiable domain. The talk closes on CAD experiments, including a Grasshopper plugin that exposes a parametric definition to an agent as MCP tools and a hackathon robot arm driven by natural language, and on the conclusion that this is not a domain expertise problem but an unhobbling problem.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Physics as Infrastructure for the AI Era17 Sep 202600:14:46

CDFAM Computational Design Symposium — Washington DC 2026

Rik Baruah · Intact Solutions

AI is reshaping engineering as it drives demand for surrogate models, large design studies, and agentic workflows that require automated simulation loops at scale. These pipelines collide with two realities: geometric representation is fragmented throughout the hardware lifecycle (from CAD to point clouds), and traditional FEA, reliant on conformal meshing and manual preprocessing, treats human intervention as a core requirement. This brittle paradigm resists automation.

Scaling simulation for the AI era is fundamentally an infrastructure problem. Using immersed grid methods, Intact natively ingests any geometry representation without preprocessing, exposing physics as an API-first callable function. We demonstrate how this architecture powers the emerging “engineering-as-code” stack through automated DOE pipelines and LLM orchestration via MCP across concept, manufacturing, and deployment.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
From Tools to Agents: How Agentic Engineering Workflows Are Reshaping Simulation-Driven Product Development17 Sep 202600:23:23

CDFAM Computational Design Symposium — Washington DC 2026

Andrew Acuff · SimScale

Simulation is central to engineering decision-making, yet in many organizations it remains an expert-driven activity rather than a scalable capability embedded across new product introduction (NPI). As product complexity grows and timelines compress, the key challenge shifts from solver accuracy to workflow coordination: when to simulate, at what fidelity, and how results inform decisions.

This talk introduces agentic engineering workflows — AI-driven systems that guide simulation tasks, recommend appropriate model fidelity, and support interpretation while remaining grounded in validated physics. By combining Engineering AI with Physics AI, these workflows move beyond static automation toward context-aware orchestration of design and validation processes.

Examples include AI assistants that assess simulation readiness — reviewing mesh quality, boundary conditions, and convergence behavior — and CAD-triggered workflows that initiate physics-based validation and surface performance trade-offs. Engineers remain in control, with AI operating within defined guardrails.

Agentic workflows enable earlier and broader use of simulation while preserving traceability, verification standards, and domain expertise. Rather than replacing traditional CAE, they represent an evolutionary step in how simulation insight is generated, reused, and governed across the product lifecycle.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Text To Spaceship: Accelerating Mission Development With AI at NASA15 Sep 202600:22:46

CDFAM Computational Design Symposium — Washington DC 2026

Ryan McClelland · NASA Goddard

AI is transforming how we design and build space missions. At NASA, we’ve already shown that AI can take requirements and rapidly generate optimized structures that are lighter, stronger, and delivered in days instead of months. The Text-to-Spaceship vision scales this up through a secure, cloud-deployed ecosystem of AI-accessible design, analysis, and manufacturing tools. Language-defined requirements flow through these automated systems, accelerating mission development by an order of magnitude. In this talk, I’ll share how we’ve gone from balloon brackets to full payload designs and why Text-to-Spaceship is becoming a near-term reality that will redefine how we explore the universe.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Authoring Autonomy14 Sep 202600:34:07

CDFAM Computational Design Symposium — Washington DC 2026

Brian Ringley · Boston Dynamics

Atlas is a general-purpose humanoid aimed squarely at industrial work, and Brian Ringley makes the case that its value is economic rather than technological. Most of the automation gaps on a factory floor could be closed with conventional equipment; what makes that impractical is designing a bespoke solution for each one. A single investment in generalised hardware turns all of those separate problems into one software problem, which is a far cheaper thing to solve.

The talk walks through the industrial design decisions that follow from putting a machine into shared human space. Why the robot has a head and a face that turns: perception needs to sit at eye level, and a gaze tells a person nearby that they have been seen and hints at what the robot will do next. Why it reads as equipment rather than as a person. And why only two actuator types appear across the whole machine, giving a blocky, repetitive design language in exchange for cost, reliability and field-replaceable parts, with continuously rotating joints that let it work in ways a human body cannot.

The second half is about teaching it to do useful work. Ringley lays out the current stack — reinforcement learning for whole-body control, behaviour cloning from VR teleoperation for manipulation, and a vision-language model above both for reasoning and tool calls — and is candid that the hard constraint is data. There is no internet-scale corpus of action data, so it has to be produced: pilots suited up in VR on real plant floors, training in simulation to remove latency, and supervised correction where a human takes control mid-policy to annotate what went wrong. Running underneath is an argument about authorship, that the line between who writes software and who uses it has largely dissolved, and that the world itself is becoming the arena in which this software is trained.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
HOOPS AI: Correlating CAD Geometry with Manufacturing & Business Process Information12 Sep 202600:19:24

CDFAM Computational Design Symposium — Barcelona 2026

Luis Salazar Betancourt · Tech Soft 3D

Advances in computational design and additive manufacturing have enabled increasingly complex geometry, but industrial AI adoption remains constrained by a fundamental challenge: relating CAD design data to manufacturing behavior and downstream business processes. Geometry, process data, and enterprise information are typically analyzed in isolation, making it difficult to understand how design decisions propagate across the product lifecycle.

HOOPS AI addresses this by transforming CAD and manufacturing data into unified, AI-ready representations built on the HOOPS platform. The approach focuses on extracting stable geometric and feature-level abstractions that serve as a common reference across engineering and non-engineering domains, without reliance on native CAD kernels or proprietary data models.

These representations enable systematic comparison, grouping, and retrieval of parts based on geometric and functional characteristics. The same representations can be associated with manufacturing signals, quality indicators, and production constraints, and extended to link with business process information in an IP-safe manner. This allows AI systems to reason about relationships between CAD geometry, manufacturing outcomes, and operational drivers.

The presentation covers the architectural principles behind HOOPS AI and illustrates how unified representations support scalable integration of AI into industrial CAD and additive manufacturing workflows, with emphasis on system design and interoperability.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Architected Porosity Informed by Real-World Data for More-Than-Human Thermal Comfort12 Sep 202600:19:01

CDFAM Computational Design Symposium — Barcelona 2026

Maria Claudia Valverde Rojas · University of Stuttgart, IntCDC

This presentation introduces a design and research framework that integrates geometry generation with real-world climatic and ecological data to support more-than-human thermal comfort in the exterior of building envelopes. Over the past two years, I have developed architected porous cellular structures, periodic and non-periodic, based on adaptive density minimal surfaces (ADMS) and triply periodic minimal surfaces (TPMS). These structures serve as protective envelopes for nesting tubes used by cavity-nesting wild bees. The novelty of this work lies not in the digital modelling itself, but in demonstrating how pore size and spatial gradients can be tuned to buffer heat threats inside nesting cavities, and how these porous morphologies behave under real outdoor conditions. Full-scale and small-scale prototypes were installed on real building settings, where they were exposed to solar radiation, diurnal temperature swings, summer heat events and varying humidity. Continuous monitoring revealed how these structures process and respond to environmental information, delaying heat peaks, modulating temperature transfer, and interacting with passive evaporative cooling strategies. In parallel, wild bee occupation of the prototypes provided biological feedback, confirming which geometries are perceived as suitable nesting habitats. Bringing together digital modelling, outdoor performance testing and ecological observation, this research proposes a design approach that situates building envelopes as active interfaces capable of supporting more-than-human thermal comfort in urban environments.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Real-Time Multi-Physics Collaboration for Real-World Engineering12 Sep 202600:25:01

CDFAM Computational Design Symposium — Barcelona 2026

Nikolas Borrel Jensen, Oliver Littlewood · Pasteur Labs

Real multiphysics necessitates coordination along multiple dimensions: one is of course the mixed physics, another is the heterogeneous data types & modeling approaches, and a third is the multidisciplinary (mis)communication. AI shoved into engineering workflows does not eliminate these gaps, rather it exacerbates them. For instance, numerical solver outputs and ML data structures are incompatible, with no shared representations to bridge them. At the human level, CAE experts, Mech/Aero/Nuclear Engineers, Systems Engineers, and AI/ML Engineers all operate in different conceptual frameworks and thus lose valuable time and information at every handoff.

This talk presents Pasteur Labs’ approach to streamlining all three dimensions of multiphysics with the cohesive “Simulation Intelligence (SI) Platform”, emphasizing three plug-n-play products. SI Testbeds automate data generation end-to-end, from preprocessing through simulation runs and postprocessing, producing ML-ready CAE datasets at scale. SI Workspaces enable the flexible composition of next-generation multi-physics pipelines by stratifying surrogate models, optimization methods, and uncertainty quantification tools, with automatic differentiation as a first-class citizen throughout. Tesseracts are end-to-end differentiable containers that encapsulate heterogeneous numerical solvers and surrogate models behind a unified API, making otherwise incompatible components interoperable by design across software, hardware and teams. All prioritize modularity, scalability, and traceability, providing the engineering cohesion that is needed to adopt Physics-AI.

The SI Platform is elucidated by two different types of engineers working on two concrete engineering cases, with real-time collaboration: surrogate-based acceleration and optimization of centrifugal pump performance, and end-to-end gradient-based parametric optimization of rocket grid fins.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Beyond Surrogates: Foundational AI for Physics-Native Design12 Sep 202600:19:15

CDFAM Computational Design Symposium — Barcelona 2026

Wasil Rezk · BeyondMath

A new generation of AI models is emerging — not just faster approximators, but intelligent systems that understand and generate physics.

This talk explores how foundational physics AI breaks from the surrogate modeling paradigm. Unlike models that rely on customer-provided simulation data or narrow datasets, BeyondMath’s models are trained on self-generated data rooted in first principles — not interpolating outcomes, but learning the physical laws and structure of the design space itself.

This approach enables something radically new: generalizable, physics-consistent predictions at near-CFD fidelity, delivered in seconds — and without the need to retrain when a geometry changes. It opens the door to simulation-native design workflows, where simulation is not a bottleneck but a continuous, integrated part of ideation and optimization.

– Why surrogate AI models struggle in real-world engineering

– What it means to build a foundational model that learns physics, not data correlations

– Case studies from sectors like motorsport and energy

– How these models enable new kinds of design tools and thinking

This is not an evolution of simulation — it’s a rethinking of how AI and physics interact. Foundational AI for physics is here, and it’s reshaping the very act of designing the physical world.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
NeuralShipper: Generative AI for the Next Generation of Ship Design and Manufacturing12 Sep 202600:18:11

CDFAM Computational Design Symposium — Barcelona 2026

Shahroz Khan · Compute Maritime

Water transport, which accounts for approximately 90% of global trade, is essential to economic growth but poses a significant environmental challenge. In 2020, shipping emitted 1.4 billion tonnes of CO₂, nearly 3% of global emissions. Without decisive action, this figure could rise to 18% by 2050. To address this, the International Maritime Organization (IMO) is increasing regulatory and financial pressure on industry stakeholders to cut emissions by at least 40% by 2030 through the adoption of innovative technologies.

Achieving these targets requires optimising vessel performance from design through to operation. In fact, 80% of a product’s environmental impact is determined at the design stage, making it the most effective point for influencing a ship’s environmental footprint. Experienced shipbuilders recognise that design and engineering decisions made at this stage affect 85% of total construction costs and approximately 90% of overall vessel performance.

However, the maritime industry is often perceived as conservative compared to other transport sectors such as automotive and aerospace. Existing design practices are not suited to developing tools that enable true innovation.

This is where Compute Maritime enters the picture, offering AI-powered design tools and data-driven solutions for maritime sustainability.

Our flagship product, NeuralShipper, is the world’s first generative AI co-pilot for the design, optimisation, and simulation of maritime systems. It can handle everything from ship hulls and propellers to hydrofoils and rudders, all within a single platform.

Unlike conventional tools, which are often restricted to specific ship types, NeuralShipper is universally adaptable. Whether naval architects and marine engineers are working on a fuel-efficient cargo ship, a specialised workboat, a sleek yacht, or a complex naval vessel, NeuralShipper is designed to support them and accelerate the maritime industry’s progress towards net-zero emissions.

With only a few design specifications as input, NeuralShipper can generate thousands of tailored design concepts within minutes, each meeting the specified criteria. This eliminates the need for manually drafting preliminary sketches or parametric CAD models, enabling designers to evaluate optimised options in real time. Users can also define custom constraints and performance criteria to create bespoke solutions.

Traditional design tools rely heavily on user expertise and deep familiarity with complex software, making the process slow and innovation-limiting. In contrast, NeuralShipper streamlines the entire process. It acts as a collaborative AI designer, working alongside human experts to develop solutions that are both performance-efficient and innovative. This significantly accelerates concept development and allows teams to move swiftly into detailed design without compromising on creativity, innovation, or sustainability.

At the core of NeuralShipper lies our Large Geometric Foundation Model, trained on over 100,000 ship designs encompassing nearly every type, shape, and category. This extensive dataset gives NeuralShipper a unique ability to generate solutions that would be difficult or even impossible for human designers to achieve when working with incomplete inputs or domain-limited knowledge. Such scenarios are common in cutting-edge projects exploring next-generation propulsion systems and alternative fuels.

Importantly, NeuralShipper is the first generative AI model capable of directly outputting a CAD model, primarily in the form of a NURBS surface. One of the critical challenges facing existing 3D foundational models is surface quality. These models, which often rely on low-level shape representations, frequently fail to capture the geometric precision required for reliable performance analysis. In engineering contexts, where even minor surface imperfections can significantly influence outcomes, ensuring smoothness and validity is crucial.

Addressing this challenge, and achieving high surface quality and physics-informed accuracy, has been central to NeuralShipper’s innovation.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Conjugate Heat Transfer Optimization for Turbine Blade Thermal Performance Using Field-Driven Design12 Sep 202600:24:54

CDFAM Computational Design Symposium — Barcelona 2026

Max Gaedtke, Markus Lempke · nTop, Siemens Energy

Turbine blade thermal management demands tight coupling between design exploration and high-fidelity simulation—yet traditional workflows separate these domains, limiting the design space that can be practically explored.

We present an integrated parametric optimization framework enabled by nTop’s robust implicit geometry engine. Field-driven design representation eliminates mesh regeneration between design variants, while a Lattice Boltzmann Method formulation for conjugate heat transfer removes the need for explicit fluid-solid interface handling. This architectural unity—implicit geometry paired with interface-agnostic thermal transport—permits fully automated design-simulate-optimize loops on complex internal cooling geometries.

The GPU-native solver has been validated against finite-volume baselines on canonical heat sink geometries, demonstrating peak temperature agreement within 0.5% while achieving approximately 200x reduction in time-to-solution on consumer-grade hardware. These evaluation times make high-fidelity CHT practical as an inner-loop optimization objective rather than a final verification step.

We demonstrate the workflow on turbine blade internal cooling channels, where parametric control over fin positioning drives systematic exploration of the thermal-structural design space. Results show automated identification of Pareto-optimal configurations balancing thermal performance, pressure drop, and additive manufacturing constraints.

This collaboration between nTop and Siemens Energy bridges computational design research with industrial turbomachinery requirements.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
An Engineer’s Approach to Integrating Machine Learning in Generative Design Tools12 Sep 202600:20:25

CDFAM Computational Design Symposium — Barcelona 2026

Thomas Rees · ToffeeX

Machine learning and Artificial Intelligence have enormous potential as tools for generative design in engineering. However, most industry efforts remain stuck in research prototypes, brittle bespoke models, or disconnected add-ons that rarely survive real engineering workflows. In this talk, we will present an engineer’s approach to integrating machine learning directly into production-ready generative design tools, drawing on our experience building the fastest physics-driven thermo-fluid optimization platform on the market. Rather than replacing physics with opaque black boxes, our methodology uses ML only where it strengthens engineering outcomes.

I will show how ToffeeX’s ML developments accelerate design exploration and automation while preserving full control of engineering intent, seamlessly extending our existing topology optimization engine which is already used daily in real production environments. This talk highlights why our approach, built on smart algorithmic design rather than brute-force model training, achieves the reliability, manufacturability, and speed required for real-world engineering.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Bridging Data to Geometry with Implicit Modeling12 Sep 202600:18:31

CDFAM Computational Design Symposium — Barcelona 2026

Wesley Essink · Siemens Digital Industries Software

Engineering design is increasingly shaped by diverse sources of data (e.g. scans, images, measurements, simulation, requirements, reference geometries etc.). Traditional geometry modeling approaches often struggle to integrate these datasets in a flexible and scalable way. Implicit modeling offers a powerful alternative: a geometry representation that naturally incorporates engineering data into the modeling process as spatially varying fields capable of driving local and global design behavior.

This presentation explores how Simcenter Inspire leverages implicit modeling to create robust, data-driven design workflows. Showcasing methods for linking complex data inputs directly to geometric parameters, enabling both automated design optimization and fine-grained user control.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Redefining Mechanical Engineering in the Age of AI12 Sep 202600:19:09

CDFAM Computational Design Symposium — Barcelona 2026

Rhushik Matroja · Cognitive Design Systems

Mechanical engineering has been limited by the capabilities of traditional CAD software, most of which are built on architectures that are more than 30 years old. How can we design the products of the next 30 years using technology created three decades ago?

AI can introduce a real paradigm shift in how we conceive and develop products, but engineers must remain at the centre of the process. As an engineer, I know that the workflow is often more important than the final result. A great result coming from a black box is never truly great.

In this talk, I will discuss the changing role of mechanical engineering in the age of AI, the key bottlenecks slowing down AI adoption, and practical ways to integrate AI into engineering workflows in a sustainable way for the aerospace and automotive industries, where standards and certification requirements are highly restrictive.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
From Tools to Agents: How Agentic Engineering Workflows Are Reshaping Simulation-Driven Product Development12 Sep 202600:20:29

CDFAM Computational Design Symposium — Barcelona 2026

Jon Wilde · Simscale

Simulation is central to engineering decision-making, yet in many organizations it remains an expert-driven activity rather than a scalable capability embedded across new product introduction (NPI). As product complexity grows and timelines compress, the key challenge shifts from solver accuracy to workflow coordination: when to simulate, at what fidelity, and how results inform decisions.

This talk introduces agentic engineering workflows — AI-driven systems that guide simulation tasks, recommend appropriate model fidelity, and support interpretation while remaining grounded in validated physics. By combining Engineering AI with Physics AI, these workflows move beyond static automation toward context-aware orchestration of design and validation processes.

Examples include AI assistants that assess simulation readiness — reviewing mesh quality, boundary conditions, and convergence behavior — and CAD-triggered workflows that initiate physics-based validation and surface performance trade-offs. Engineers remain in control, with AI operating within defined guardrails.

Agentic workflows enable earlier and broader use of simulation while preserving traceability, verification standards, and domain expertise. Rather than replacing traditional CAE, they represent an evolutionary step in how simulation insight is generated, reused, and governed across the product lifecycle.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Raven AI: The Future Is In The Spaghetti12 Sep 202600:16:41

CDFAM Computational Design Symposium — Barcelona 2026

Moritz Rietschel · Raven

Twenty years of community-built Grasshopper infrastructure, decades of firm knowledge, scattered documentation, and forum posts that solved your problem in 2011.

The problem has never been capability - it has been access.

Raven is a code agent for Grasshopper that works across 900+ plugins through the native API. Rather than replacing existing tools, it functions as an infrastructure layer: connecting users to what was already there.

Moritz Rietschel walks through what it actually takes to build AI that works with CAD. How do you fit 3D geometry and graph logic into a 1D token stream? How do you handle the points where an LLM's assumptions and Rhino's reality diverge? Why do reasoning models sometimes spiral without producing anything useful, and what guardrails keep them on track? He also addresses how Raven draws from both public knowledge and firm-specific context, and what it means to design for recombination when every project demands a unique plugin assembly and every user has a globally unique Grasshopper setup.

This is a technical account of building AI infrastructure for creative engineering workflows - what breaks, what surprised the team, and how they are thinking about AI within existing ecosystems rather than as a replacement for them.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Computational Design of Personalized CPAP Masks12 Sep 202600:18:01

CDFAM Computational Design Symposium — Barcelona 2026

Anne Pasman, Emmy Kerssen · Saxion Hogeschool

CPAP therapy is used to treat patients with sleep apnea by providing constant air pressure through a mask during sleep. For many patients (75,4%), standard masks fit poorly or require tight adjustment, causing issues such as pressure points or leakage resulting in dry eyes, skin irritation, and finally even therapy discontinuation (30%). Personalized CPAP masks can improve fit and comfort and reduce leakage.

However, early designs face challenges due to the interaction between soft facial tissue and mask materials. During sleep, facial deformation and mask compliance vary with posture, often leading to leakage. In this study, we analyzed 3D scans of individuals lying in multiple positions to model how posture affects mask shape. To improve further, a sensor instrument was developed to measure pressure points while wearing existing masks, this data was used to optimize a computational model that integrates head posture, 3D scan data, and facial softness to guide mask personalization.

Two mask concepts were developed: (1) a fully personalized mask with a 3D-printed soft interface and a rigid hard part available in three sizes, and (2) an intermediate personalized layer that fits between a standard mask and the face to improve fit without replacing the entire mask. Both designs were optimized for 3D printing with Lynxter silicone -improving slicing, print time, neatness, and thickness distribution – as well as for manufacturing with SLA cocoon molding and silicone casting.

Clinical testing in a dutch hospital is planned for March to evaluate the fit of both designs. Results are expected to provide insights into personalized mask design, the feasibility of a 3D scan–model–print workflow in a regional hospital, and the potential of 3D-printed masks for tailored CPAP therapy. When this strategy for generating the model and manufacturing proves potential, the strategy can be extended to other respiratory masks.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Empowering Architects with Early-Stage Environmental Intelligence12 Sep 202600:17:33

CDFAM Computational Design Symposium — Barcelona 2026

Michele Pescatore, Carol Fanjul · AiA Life Designers

Michele Pescatore and Carol Fanjul of AiA Life Designers present a simulation-driven workflow that brings environmental analysis into the earliest stages of architectural design, where decisions have the greatest influence on a project's environmental performance but actionable feedback is usually missing.

Conventional environmental tools require detailed BIM models or expert-level parametrization, so studies become outdated as a project evolves. To close that gap, AiA Life Designers built a streamlined Revit plug-in using Rhino.Inside.Revit, Grasshopper, and the open-source Honeybee and Ladybug ecosystems. It delivers simplified but meaningful indicators directly in the architect's working environment: envelope performance checks, site permeability, carbon impact estimates, and solar and daylight analyses.

The result is real-time, performance-based feedback that lets architects test assumptions, adjust parameters, and see environmental implications well before formal engineering studies begin, without disrupting existing design processes. The presentation covers real-world project case studies, concrete outcomes, and the scalability of these tools across a large architectural organization.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
A New Ecological Simulation Framework for Rhino/Grasshopper12 Sep 202600:21:31

CDFAM Computational Design Symposium — Barcelona 2026

Verena Vogler · McNeel Europe

Verena Vogler introduces Rhino.Ecologic, an ecological simulation framework for Rhino and Grasshopper built for landscape architects and urban planners working in computational design. The plugin integrates ecological simulation into existing 3D modeling workflows to support nature-inclusive strategies at large and small scales.

The presentation covers how the tool generates location and time specific 3D species distribution maps alongside biomass and biodiversity simulations, supporting data-driven ecological decisions throughout the design process. It includes an overview of the plugin, an introduction to ecological simulation in AEC, and a demonstration of the tool in practice.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Computational Color and Texture for Additive Manufacturing12 Sep 202600:22:51

CDFAM Computational Design Symposium — Barcelona 2026

Mary Baker · Palace 3D

Computational geometry has advanced considerably. Color and texture in additive design have not kept pace. As multi-material hardware and capable file formats become more accessible, programming color and texture directly into the design workflow is emerging as a meaningful new capability.

Mary Baker draws on her experience building out that toolset at Palace 3D and previously at HP Inc., covering effects that traditional modeling tools cannot easily produce:

- Embedded data: hidden messages and encoded information within a part's surface

- Gradient control: geometry-driven color and texture transitions

- Realistic in-workflow rendering: accurate as-printed color and texture previews

- Procedural customization: automated generation of unique colorways across product families, including AI-generated content

The session also covers the workflows required to translate digital intent into reliable physical output, common failure points, and how to navigate them.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Immersive Engineering: Navigating Harnessing in True-Scale 3D12 Sep 202600:16:14

CDFAM Computational Design Symposium — Barcelona 2026

Oluwaseyi Sosanya · Gravity Sketch

Spatial computing is regularly framed as a future breakthrough. In certain workflows, it is already delivering measurable value.

Oluwaseyi Sosanya examines where immersive technologies are making a tangible impact in product development today, with particular attention to cable harnessing and automotive clay modeling. These are workflows where teams still depend on physical prototypes to evaluate critical decisions. Spatial tools enable earlier, more confident decision-making by improving spatial understanding and reducing costly physical iteration.

The talk also addresses the practical realities of building for spatial hardware: performance constraints, interaction design, and what it takes to make these systems function in real-world engineering environments.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Beyond the Specialist: How Istari + AI Expands Who Gets to Drive Innovation in Hardware12 Sep 202600:16:22

CDFAM Computational Design Symposium — Barcelona 2026

Rebeka Melber · Istari Digital

AI coding tools didn't just accelerate software development — they changed who gets to build. A comparable shift is underway in hardware.

Rebeka Melber examines how AI paired with connected engineering infrastructure is lowering the barrier to hardware innovation. The argument isn't that AI replaces deep expertise. It's that it expands who can contribute meaningfully to the design process — and earlier in it. When more of the right people can engage at the right time, ideas move faster and better solutions emerge from places they otherwise wouldn't.

The talk draws on Istari's work with defense and government programs adopting next-generation digital engineering environments, and addresses what it takes to make advanced tools genuinely accessible within complex, mission-critical organizations.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
You have an infrastructure problem, not an AI problem12 Sep 202600:15:45

CDFAM Computational Design Symposium — Barcelona 2026

Javier Blanco Cordero · Quix

Engineering teams have found AI useful for discrete tasks: SQL queries, graphs, summaries. Higher-value work, root cause analysis, physics-based ML, production deployment, remains out of reach. The standard diagnosis is that the models need to improve. Javier Blanco Cordero's experience points the other way: the models are already sufficient. The infrastructure surrounding them is not.

Using a real rotor balancing case involving 50,000 rotors per year, this talk walks through what it takes to move AI from task-level support to autonomous engineering investigation. With the right infrastructure in place, a model that had underperformed on summary data identified a discriminating signal in 100 kHz vibration data that decades of domain expertise had missed. That same model independently designed a deployment plan that reduced total balancing runs by 41%.

The presentation covers what was built, the results, and what it means for any organization sitting on complex engineering data.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Large Engineering Models: Reimagining Design, Simulation, and Manufacturing | EMMI AI12 Sep 202600:17:32

CDFAM Computational Design Symposium — Barcelona 2026

Quercus Hernández · Emmi AI

Engineering is entering a new paradigm where AI is no longer limited to accelerating isolated simulations, but is becoming a foundational layer of the industrial design and manufacturing stack. Across sectors such as automotive, energy, semiconductors, and aerospace, engineering workflows remain constrained by slow simulation feedback loops, fragmented CAD-to-CAE pipelines, and computational bottlenecks that limit design exploration and innovation speed.

In this talk, we present the vision of Large Engineering Models developed at Emmi AI: physics-aware foundation models designed to operate directly on industrial geometry and process inputs while replacing large parts of the traditional numerical simulation workflow. Rather than focusing on narrow surrogate models, this approach consolidates geometry processing, physics prediction, and post-processing into a unified AI-native engineering interface that provides near real-time feedback to engineers and designers.

As a concrete industry showcase, we present NeuralMould, our first commercially deployed Large Engineering Model for injection moulding. The model enables engineers to evaluate design changes such as gate placement, material selection, and process parameters with near-instant feedback, eliminating traditional meshing bottlenecks and dramatically accelerating design iteration cycles. In addition, we introduce Noether, our recently released open-source framework for building and deploying engineering AI models at scale. Noether provides the infrastructure for training, fine-tuning, and operating Large Engineering Models across domains, enabling industrial partners and researchers to develop their own AI-native simulation capabilities.

Links

Talk page with full transcript

Watch the talk on YouTube

Cite this talk

Search the full text of every recorded CDFAM presentation



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Beyond Parametric: Explorable Simulation for Real Design Iterations04 Sep 202600:19:58

Beyond Parametric: Explorable Simulation for Real Design Iterations

Presentation Abstract

Design space exploration promises engineers the ability to evaluate thousands of variants in hours. The prerequisite—rarely discussed—is building a parametric geometry model that won’t break. This front-loaded investment assumes you know your design space before exploring it. Real engineering iteration isn’t parametric. Design changes are structural and topological: fundamentally different geometries evaluated against the same performance criteria.

Setup time, not simulation time, is the real bottleneck in enabling simulation-driven exploration for real engineering teams.

At Generative Engineering, this is what we are addressing. We enable explorable simulations that work with both parametric exploration and novel designs. We will demonstrate how this is unlocked by using existing simulation data inside engineering organisations to train geometry preparation models rather than physics surrogates.

This lets the messy, collaborative, real design iterations be simulated with zero setup cost. But the same principle extends further: if a model understands what makes geometry simulation-ready for a given analysis, it can generate that geometry directly. We’ll show work on closing this loop—from a sketch or annotation on a previous design to simulation-ready geometry, collapsing the traditional boundary between design intent and engineering validation.

Speaker Bio

Laurence Cook is Co-Founder and Chief Product Officer at Generative Engineering.

After academic work at MIT, Stanford, and Cambridge, Laurence brought his computational engineering to the commercial industry and is now leading the initial commercial product of Generative Engineering. A 20 strong team of computational and commercial experts who have currently raised €13m.



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
Design For Real World Engineering: Integrating Uncertainty Into Product Assessment - Greg Grigoriadis - Metisec11 May 202600:17:03

Deterministic engineering analysis assigns fixed values to loading conditions, geometry, and material properties. The approach is tractable, but it forces a choice between conservative overdesign and exposure to failure modes that fall outside assumed limits. Neither outcome is satisfying.

Greg Grigoriadis of Metisec describes a design toolkit that replaces fixed inputs with statistical distributions and runs Monte Carlo simulations across the resulting parameter space. The output is a probabilistic picture of performance: failure probabilities, sensitivity rankings, and the specific conditions that actually drive risk.

A sensor mounting bracket for a smart wearable serves as the test case. Traditional optimization cut bracket weight by 30%. Probabilistic analysis revealed the design had been tuned to an improbable drop event and still carried unresolved thermal failure risk. Incorporating that information allowed the team to re-optimize and achieve a 50% weight reduction at a demonstrably low failure probability.

Greg is an engineering consultant specializing in consumer electronics, digital twin technologies, and advanced simulation workflows. His practice combines physics-based modeling with data-driven methods across finite element analysis, predictive maintenance, and automated computation pipelines.

Presented at CDFAM Barcelona 2026. Learn more at cdfam.com.



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
SEAT | Digitizing Body-in-White Development with MAS Synera04 May 202600:19:32

Body-in-White development sits at the intersection of structural performance, manufacturability, and schedule pressure — and traditional workflows are increasingly strained by the pace of platform proliferation and regulatory demands. This episode examines how SEAT/CUPRA is modernizing BIW development through Synera’s Multi-Agent System (MAS), connecting CAD, CAE, and manufacturing processes within a unified automation framework to accelerate iteration and improve engineering traceability.

Tilman Steininger, Customer Success Manager for Agentic Engineering at Synera, and Juan De Dios Escribano Felguera, Team Lead for Body-in-White and Corrosion Development at SEAT/CUPRA, present their collaborative work digitizing structural development workflows across the full BIW development cycle. Recorded at CDFAM Barcelona 2026.

About CDFAM

The CDFAM Computational Design Symposium is a global conference series bringing together researchers, engineers, and software developers working at the intersection of computational design, AI and machine learning for engineering and architecture. The program spans computational geometry, generative design, topology optimization, simulation-driven workflows, and advanced manufacturing across scales from architected materials to architectural systems. CDFAM events are held worldwide.

cdfam.com



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
SubSimX: Interactive Subdivision-to-FEM for Computational Design27 Apr 202600:16:49

The gap between geometric modeling and structural simulation has always been a workflow problem as much as a technical one. Every time a designer changes a shape, the mesh breaks, boundary conditions need redefining, and the simulation has to be rerun from scratch. At the scale of iterative or generative design workflows, that overhead compounds quickly.

In this episode recorded at CDFAM Barcelona 2026, Johannes Mueller-Roemer presents SubSimX, a pipeline that addresses this by treating subdivision surfaces as a native simulation medium rather than a preprocessing step. Designers work on a standard Catmull-Clark control mesh. Meshing and boundary condition setup happen once. From that point, geometry edits propagate to the existing analysis mesh in seconds, structural feedback is continuous, and the design session never has to stop for remeshing.

The technical core is a precomputed mapping between the control mesh and the volumetric interior, combined with a local mesh-repair step that maintains element quality through large deformations without changing mesh topology. Coupled with RISTRA, Fraunhofer’s GPU-accelerated FEM solver, the system delivers real-time or near real-time structural feedback. Johannes demonstrates how this enables dense design sweeps, topology optimization followed by subdivision refinement, and AI-in-the-loop exploration within practical industrial workflows.

Johannes Mueller-Roemer is Deputy Head of Interactive Engineering Technologies at the Fraunhofer Institute for Computer Graphics Research IGD. He received his PhD from TU Darmstadt in 2019, where his dissertation introduced GPU data structures for tightly coupled modeling and simulation — the foundation SubSimX is built on.

Recorded at CDFAM Barcelona 2026 — https://cdfam.com/barcelona-2026/



This is a public episode. If you would like to discuss this with other subscribers or get access to bonus episodes, visit www.designforam.com
© My Podcast Data · Projet indépendant · Données issues d'Apple & Spotify